Oc obe 20 - 22, 2021, B no, Czech Republic, EU
PVDF/PVDF-TRFE BLENDS LOADED WITH BATIO3: FROM PROCESSING TO PERFORMANCE
TESTING
1Ma in CVEK, 1Mi osla MRLÍK, 1Jose OSIČKA, 1Danila GORGOL, 2Pa el TOFEL
1Tomas Ba a Uni e si y in Zlín, Uni e si y Ins i u e, Cen e o Polyme Sys ems, Zlín, Czech Republic, EU,
[email p o ec ed]
2B no Uni e si y o Technology, Depa men o Physics, Facul y o Elec ical Enginee ing and
Communica ion, B no, Czech Republic, EU
h ps://doi.o g/10.37904/nanocon.2021.4327
Abs ac
Conce ns su ounding he limi ed supply o ossil uels ha e been he subjec o much deba e. As o p omising
solu ions, polyme s like poly( inylidene luo ide) (PVDF) ha e gained a en ion due o hei abili y o gene a e
elec ical ene gy om he was e mechanical ib a ions. The ene gy ha es ing and ib a ion sensing po en ial
o PVDF is howe e limi ed due o i s low con en o elec oac i e β-phase, which has o be inc eased by
indi ec pos -p ocessing. Recen ly, a syne gis ic e ec was ound in PVDF di ec ly blended wi h i s
i luo oe hylene copolyme (PVDF-T FE) due o s ong in e acial pola iza ion. In his s udy, we aim o u he
inc emen he piezoelec ic pe o mance o PVDF/PVDF-T FE blends by inco po a ing a small amoun o
BaTiO3 nanoc ys als ia a acile and scalable p ocessing ou e. The β-phase con en was moni o ed using
FTIR and XRD. Mel heology expe imen s showed ha co-blending o PVDF-T FE as well as he addi ion o
BaTiO3 sligh ly inc eased mel iscosi y and complex modulus. Despi e ha , heological da a sugges ed ha
de eloped o mula ions can be p ocessed by con en ional echniques in ended o a la ge-scale p oduc ion.
Mo e impo an ly, PVDF/PVDF-T FE bina y blends supplemen ed wi h BaTiO3 a e expec ed o exhibi supe io
d33 compa ed o con en ional nea blends, which could make hem highly p omising o mode n ene gy
ha es ing and senso - ela ed applica ions.
Keywo ds: Nanohyb id, ib a ion sensing, PVDF, blending, d33, piezoelec ici y
1. INTRODUCTION
The inc easing demand o he elec ical ene gy and deple ion o ossil uels a e highly conce ning ac s o he
p esen ime [1]. The ene gy ha es ing sys ems ep esen an al e na i e concep o add ess his challenge by
con e ing he was e mechanical ene gy, such as ib a ions, ai / luid mo emen , body mo ion e c., in o he
use ul elec ical o m [2]. Fo his pu pose, piezoelec ic ma e ials a e well-sui ed since hey spon aneously
pola ize when subjec ed o a mechanical s ess [1,3]. Al hough he ene gy nanogene a o s based on a ious
ino ganic ma e ials (BaTiO3, ZnO, InN, GaN, CdS) o ce amics (NaNbO3, KNbO3) ha e shown high
piezoelec ic coe icien s, hey a e b i le, hea y and di icul o p ocess [4]. These d awbacks can be
elimina ed/ educed by using e oelec ic polyme s, mainly poly( inylidene luo ide) (PVDF) and i s copolyme s
wi h i luo oe hylene (PVDF-T FE) [5] o hexa luo op opylene (PVDF-HFP) [6].
PVDF is a semi-c ys alline polyme exis ing in i e phases (α-, β-, γ-, δ- and ε-) depending on he p ocessing
ou es and pos - ea men . The α- and ε-phases a e easily accessible di ec ly om polyme mel [7], hey a e
howe e non-pola due o ans-gauche con o ma ion sel -canceling he dipoles [5]. The γ- and δ-polymo phs
a e pola o some ex en , and hence piezo- and e oelec ic [8]. While γ-phase PVDF is ha dly accessible om
α-phase using spa ially con ined sys ems; he α- o δ-phase changeo e can be ealized by so-called
elec o o ming p ocess unde elec ic ields (~150 kV/mm) [5,8]. The mos desi able phase o he cons uc ion
Oc obe 20 - 22, 2021, B no, Czech Republic, EU
o ene gy ha es ing and sensing de ices, i.e. β-phase, can be ob ained om α-phase by s e ching (uniaxial
o biaxial) a he ele a ed empe a u es [9,10], and/o by polling o PVDF ilms unde s ong elec ic ields
(abo e 500 kV/mm) [5, 11].
Con a y o PVDF, he copolyme PVDF-T FE c ys alizes di ec ly in o he elec oac i e β-phase ega dless he
p ocessing condi ions o pos - ea men . Besides, PVDF-T FE shows an inc eased chain mobili y enabling o
each c ys allini y o up o 90%, compa ed o PVDF ha a ains he maximal c ys allini y o ~50% [5].
A p esen , he use o PVDF-T FE is limi ed due o i s complica ed syn hesis, which is e lec ed in high p ice,
and ela i ely na ow wo king empe a u e ange [12]. F om hese easons, co-blending s a egy was adop ed
o syne gis ically combine p ope ies o he indi idual componen s. PVDF/PVDF-T FE blends we e ound o
be immiscible in he c ys alline phase [13], howe e , hei miscibili y on he lamella le el was la e con i med
due o co-exis ing mixed amo phous phase [14]. Meng e al. [5] ound ha mino amoun s o PVDF-T FE
signi ican ly inc eased β-phase con en o PVDF, e en beyond he ule-o -mix u es. This syne gism wi h o igins
in he in e acial pola iza ion esul ed o a la ge dielec ic cons an o PVDF/PVDF-T FE when compa ed o
pu e componen s. O he s a egy o enhancing he piezoelec ic ac i i y o PVDF is based on he inco po a ion
o small amoun s o a ious nano ille s [15,16] o main ain lexibili y o he PVDF senso s, and e en enhance
hei he mal s abili y [6].
Despi e signi ican p og ess, a li le a en ion has been paid o co-blended PVDF-based copolyme s
wi h inclusions o piezoelec ic nanoc ys als. Yang e al. [6] ound ha PVDF/PVDF-HFP blends loaded wi h
dopamine-modi ied BaTiO3 exhibi ed supe io pola iza ion le el (d33 = 40 pc/N) compa ed o nea
PVDF/PVDF-HFP blend (d33 = 23 pc/N), and ob iously, nea PVDF (d33 = 18 pc/N). In his wo k, we aim o
u he inc ease he piezoelec ic pe o mance o PVDF/PVDF-T FE blends by embedding he piezoelec ic
BaTiO3 nanoc ys als. The blending p ocess was pe o med on a compounding de ice ha allows he la ge-
scale p oduc ion. F om he p ocessing pe spec i e, he heological beha io o he bina y blends as well as
hei BaTiO3-loaded analogues was s udied. Finally, he e ec s o PVDF-T FE and BaTiO3 on he o ma ion o
he elec oac i e β-phase con en , and consequen ial d33 coe icien we e in es iga ed, implying a g ea
po en ial o he de eloped nanocomposi es.
2. EXPERIMENTAL PART
2.1. Ma e ials
PVDF beads (CAS numbe : 24937-79-9, densi y o 1.78 g/cm3) ha ing he a e age molecula weigh (MW) o
107 000 g/mol, PVDF-T FE (Sol ene®300/P300, CAS numbe : 28960-88-5, densi y o 1.90 g/cm3) wi h he
composi ion o VDF and T FE o 70 and 30 mol%, espec i ely, and BaTiO3 nanopowde (CAS numbe : 12047-
27-7, densi y o 6.08 g/cm3) we e pu chased om Sigma-Ald ich (USA).
2.2. Fab ica ion o nanocomposi es
The desi ed amoun s o PVDF and PVDF-T FE we e mel -blended using a mic o-compounde DSM Xplo e
MC15 (Xplo e Ins umen s, The Ne he lands) a 240°C o p oduce bina y blends wi h he weigh a ios o 100/0
and 80/20. In pa allel, analogous PVDF/PVDF-T FE blends we e ab ica ed con aining 5 w % o BaTiO3
nanopowde . In a dosing sequence, he eeds ock was g adually in oduced in o he compounde wi hin
2 minu es a 25 pm, ollowed by 10 minu e blending a 40 pm. A cons an o que indica ed homogenei y o
he blends (and dispe sion o he BaTiO3). The p oduc was collec ed in a o m o ilamen .
Each ilamen was cu in o pieces ha we e comp ession molded o p oduce ilms wi h a hickness o 0.5 mm.
The calcula ed amoun s o g anules we e placed in o me allic molds, p e-hea ed o 5 minu es, and
comp essed wi h a p essu e o 10 MPa o he addi ional 5 minu es, while empe a u e was se o 210 °C.
A e wa ds, he mold was cooled down in a con olled manne o ensu e epea abili y o he p ocess.
Oc obe 20 - 22, 2021, B no, Czech Republic, EU
2.3. Gene al cha ac e iza ions
The dimensions and mo phology o BaTiO3 was s udied by ansmission elec on mic oscopy (TEM) on a JEM-
2100Plus (JEOL, Japan) de ice equipped wi h a LaB6 ca hode ope a ing unde he accele a ing ol age o
200 kV. P io o he analysis, he nanopowde was dispe sed in ace one and d ipped on o a ca bon-coa ed
TEM g id (300 mesh, Aga Scien i ic, UK). The TEM images we e analyzed using ImageJ so wa e (Na ional
Ins i u es o Heal h, USA).
The su ace p ope ies o BaTiO3 we e in es iga ed h ough ni ogen adso p ion/deso p ion iso he m collec ed
on a olume ic gas adso p ion analyze (BELso p Mini II, BEL, Japan) a 77K. The sample was degassed a
60 °C o 5 hou s be o e s a ing he measu emen . The speci ic su ace a ea was de e mined by B unaue -
Emme -Telle (BET) me hod using da a poin s o ela i e p essu e ange om 0.05 o 0.30.
The Fou ie ans o m in a ed spec oscopy (FTIR) was pe o med on Nicole 6700 (The mo-Scien i ic, USA)
spec ome e equipped wi h ATR accesso y using a ge manium c ys al. The spec a we e acqui ed in a
wa enumbe ange o 4000-500 cm-1 wi h a spec al inc emen o 2 cm-1 a labo a o y condi ions.
The c ys allog aphic s uc u e o he samples was examined ia X-Ray di ac ions (XRD) using Mini lex 600
(Rigaku, Japan) di ac ome e wi h a Co-Kα adia ion sou ce (λ = 1.789 Å) ope a ing wi hin 2θ ange o 10-
95° wi h a scan speed o 3°/min.
Rheological beha io o he mol en-s a e samples was s udied on a Physica MCR502 (An on Paa , Aus ia)
heome e equipped wi h he CTD600 hea ing chambe and TC30 empe a u e con ol uni . The complex
iscosi y was eco ded du ing he equency sweep om 0.1 o 100 Hz wi h a cons an ampli ude s ain o
0.05 % a he empe a u e o 230 °C.
2.4. Vib a ion sensing assembly
Vib a ion sensing capabili y o he PVDF and PVDF-T FE ilms and hei BaTiO3-loaded analogues was
in es iga ed on ci cula samples o 30 mm in a diame e and a hickness o 0.5 mm. P io o he measu emen ,
he poling o samples was pe o med a 100°C using a ield o 20 kV/mm. The samples we e p essed using a
single-poin ba ; he applied mass equaled 400 g ams and equency o i s oscilla ion was se o 1 Hz. The
ou pu signal was collec ed using NI-4331 esis ance subs i u ion box (Na ional Ins umen s, USA) and he
inal d33 coe icien s we e calcula ed acco ding o he equa ions desc ibed elsewhe e [4,10].
3. RESULTS AND DISCUSSION
Al hough BaTiO3 nanopowde is a comme cial p oduc , i s ele an p ope ies we e s udied o unde s and i s
implica ions on he s uc u al and elec omechanical cha ac e is ics o PVDF-based blends. Figu e 1a shows
i s XRD pa e n wi h a numbe o sha p peaks a 25.9° (001), 36.9° (101), 45.6° (111), 53.1° (002), 60.0° (102),
66.2° (112), 78.6° (202) and 84.3° (212) p o ing pu i y and c ys alline cha ac e o he ma e ial (PDF Ca d No.
01-075-2121). The inse displays he size and mo phology; he p ima y pa icles possessed ounded-shape
wi h he a e age diame e o ~48±8 nm as de e mined by image analysis. The eco ded physiso p ion iso he m
cu e was classi ied as e e sible Type-II iso he m [17], and speci ic su ace a ea calcula ed using BET
me hod equaled 17 m2/g.
The FTIR spec a o he PVDF and PVDF/PVDF-T FE ilms a e displayed in Figu e 1b. As seen, bo h spec a
we e almos iden ical and demons a ed he coexis ence o β- and α-phase [18]. In mo e de ails,
he da a showed ha he addi ion o he PVDF-T FE inc emen ed β-phase con en , which was e lec ed in a
highe in ensi y o β-peak a ound 841 cm-1. A he same ime, he in ensi y o α-peaks a ound 763 cm-1 and
1210 cm-1 diminished con i ming he desi able phase ans o ma ion [5]. The e o e, bina y PVDF/PVDF-T FE
blend was expec ed o achie e a supe io piezoelec ic pe o mance. Such end as no e ealed in he FTIR
spec a o BaTiO3-loaded samples due o o e lapping in ensi y coming om he ille .
Oc obe 20 - 22, 2021, B no, Czech Republic, EU
Figu e 1 The XRD pa e n (a) o BaTiO3 nanopowde wi h inse TEM igu e, and he FTIR spec a (b) o he
nea PVDF and PVDF/PVDF-T FE bina y mix u e.
The XRD analysis was used o de e mine he e olu ion o he c ys alline phase in he samples. As seen in
Figu e 2a, he di ac og am (Kα1, λ = 1.790 Ǻ) o nea PVDF exhibi ed 2- he a peaks a 21.9°, 40.7° and 43.9°
co esponding o β-phase, and a small peak a ound 42.1° ela ed o α-phase. A e he addi ion o PVDF-T FE,
he in ensi y o he β-peak signal a 21.9° d ama ically inc eased, which demons a ed he abili y o T FE o
spon aneously c ys alize in o his phase, ega dless he pos - ea men [5,10]. Mo eo e , he bina y blend
exhibi ed a signi ican de elopmen o α-phase co esponding o a double-peak a 19.4° and 20.1°; he la e
is some imes associa ed also o γ-phase [18]. In oducing he BaTiO3 nanopowde modi ied he XRD spec a
(Figu e 2b) and signi ican ly a ec ed he in ensi ies o he PVDF- ela ed peaks. By compa ing he spec a, i
appea s ha he c ys alline phase was de eloped o a lowe ex en , when compa ed o he nea analogues.
This phenomenon mos likely occu ed due o nano-con inemen e ec s on polyme c ys alliza ion, since
BaTiO3 nanopa icles ep esen s e ic obs acles es ic ing he mobili y o he PVDF chains [19]. Despi e his
e ec , he PVDF/PVDF-T FE blend loaded wi h BaTiO3 exhibi ed ema kably highe β-peak in ensi y han i s
coun e pa based on PVDF. The es o he XRD spec a (2- he a abo e 28°) esembled he pa e n o BaTiO3
nanopowde .
Figu e 2 XRD pa e ns o PVDF and PVDF/PVDF-T FE blends (a) and hei BaTiO3-loaded analogues (b).
Rheological s udy was employed o gain a use ul insigh o he p ocessing abili y o he PVDF-based sys ems
and he esul s a e shown in Figu e 3. I was ound ha s o age modulus, G’, and complex iscosi y, η*, alues
o PVDF/PVDF-T FE blend we e highe han hose o nea PVDF, which was a ibu ed o a highe pola i y o
he o me p o iding s onge in e ac ions, and hus mo e esis ance o low [20]. The addi ion o BaTiO3
nanoc ys als u he inc eased he G’ and η* alues due o well-known s i ening e ec s o igid ino ganic
pa icles when dispe sed in polyme ma ix.
Oc obe 20 - 22, 2021, B no, Czech Republic, EU
Figu e 3 The mel heology da a o he PVDF and PVDF/PVDF-T FE blends (solid symbols) and hei
BaTiO3-loaded analogues (open symbols) ep esen ed as s o age modulus (a) and complex iscosi y (b).
The elec omechanical capabili y o he PVDF-based elemen s can be p ede e mined by he β-phase
con en [11] and he p esence o nano ille s [6], besides he o he ele an ac o s [10]. Table 1 displays he
eco ded d33 alues o he in es iga ed samples. As seen, he PVDF/PVDF-T FE blend exhibi ed a supe io
d33 coe icien when compa ed o he nea PVDF due o he abili y o PVDF-T FE o c ys allize di ec ly in o he
β-phase [5], which co ela es well wi h he XRD pa e n (Figu e 2a). The addi ion o BaTiO3 nanopowde
u he enhanced d33 alues (by 23.6 % and 41.7 %, espec i ely, compa ed o nea analogues), which s ems
om i s inhe en piezoelec ic cha ac e . F om hese easons, he PVDF/PVDF-T FE wi h BaTiO3 inclusions
exhibi ed he highes d33, and hus, he bes ib a ion sensing and ene gy ha es ing capabili y among he
samples. I is p esumed ha u he imp o emen s could be achie ed by inc easing he concen a ion o
BaTiO3 nanoc ys als.
Table 1 The d33 alues o he PVDF and PVDF/PVDF-T FE ilms and hei BaTiO3-loaded analogues
Sample ID
100/0
80/20
100/0 + BaTiO3
80/20 + BaTiO3
d33 (pC/N)
14.8±1.7
15.1±1.4
18.3±1.1
21.4±0.7
4. CONCLUSION
In his wo k, he p ocessing and ene gy ha es ing capabili ies o he nea PVDF, PVDF/PVDF-T FE blend,
and hei BaTiO3-loaded analogues we e in es iga ed. The ma e ials we e ab ica ed using indus ially scalable
echniques, such as compounding and comp ession molding. The FTIR showed ha bina y blend exhibi ed a
highe con en o he elec oac i e β-phase, wi hou any addi ional in e en ions o pos -p ocessing. The XRD
analysis con i med he p esence o β-phase ia cha ac e is ic signal a 21.9°, and also, a mino con en o α-
phase a 19.4° and 20.1°. The in ensi y o hese peaks was a enua ed in BaTiO3-loaded analogues, mos
p obably, due o nano-con inemen e ec s on polyme c ys alliza ion. The co-blending o PVDF-T FE and he
p esence o BaTiO3 nanoc ys als esul ed o inc eased G’ and η* alues, bu hese ac o s syne gis ically
enhanced d33 coe icien up o 21.4±0.7 pC/N, which is highly ele an o in ended applica ions.
ACKNOWLEDGEMENTS
The au ho s g a e ully acknowledge he Czech Science Founda ion (g an no. 19-17457S) o he
inancial suppo . This wo k was also suppo ed by he Minis y o Educa ion, You h and Spo s o
he Czech Republic - DKRVO (RP/CPS/2020/003) and (RP/CPS/2020/006).

Oc obe 20 - 22, 2021, B no, Czech Republic, EU
REFERENCES
[1] WANKHADE, S.H., TIWARI, S., GAUR, A., MAITI, P. PVDF-PZT nanohyb id based nanogene a o o ene gy
ha es ing applica ions. Ene gy Repo s. 2020, ol. 6, pp. 358-364.
[2] GAUR, A., KUMAR, C., TIWARI, S., MAITI, P. E icien ene gy ha es ing using p ocessed poly( inylidene
luo ide) nanogene a o . ACS Applied Ene gy Ma e ials. 2018, ol. 1, pp. 3019-3024.
[3] RAMADAN, K.S., SAMEOTO, D., EVOY, S. A e iew o piezoelec ic polyme s as unc ional ma e ials o
elec omechanical ansduce s. Sma Ma e ials and S uc u es. 2014, ol. 23, 033001.
[4] CHAMAKH, M.M., MRLIK, M., LEADENHAM, S., BAZANT, P., OSICKA, J., ALMAADEED, M.A., ERTURK, A.;
KURITKA, I. Vib a ion sensing sys ems based on poly( inylidene luo ide) and mic owa e-assis ed syn hesized
ZnO s a -like pa icles wi h con ollable s uc u al and physical p ope ies. Nanoma e ials. 2020, ol. 10, 2345.
[5] MENG, N., ZHU, X.J., MAO, R., REECE, M.J., BILOTTI, E. Nanoscale in e acial elec oac i i y in PVDF/PVDF-
T FE blended ilms wi h enhanced dielec ic and e oelec ic p ope ies. Jou nal o Ma e ials Chemis y C. 2017,
ol. 5, pp. 3296-3305.
[6] YANG, L., ZHAO, Q.Y., HOU, Y., HONG, L.Y., JI, H.L., XU, L, ZHU, K., SHEN, M., e al. Flexible poly inylidene
luo ide based nanocomposi es wi h high and s able piezoelec ic pe o mance o e a wide empe a u e ange
u ilizing he s ong mul i-in e ace e ec . Composi es Science and Technology. 2019, ol. 174, pp. 33-41.
[7] LI, L., ZHANG, M.Q., RONG, M.Z., RUAN, W.H. S udies on he ans o ma ion p ocess o PVDF om alpha o
be a phase by s e ching. RSC Ad ances. 2014, ol. 4, pp. 3938-3943.
[8] MARTIN, J., ZHAO, D., LENZ, T., KATSOURAS, I., DE LEEUW, D.M., STINGELIN, N. Solid-s a e-p ocessing o
del a-PVDF. Ma e ials Ho izons. 2017, ol. 4, pp. 408-414.
[9] MOHAMMADI, B., YOUSEFI, A.A., BELLAH, S.M. E ec o ensile s ain a e and elonga ion on c ys alline
s uc u e and piezoelec ic p ope ies o PVDF hin ilms. Polyme Tes ing. 2007, ol. 26, pp. 42-50.
[10] MRLIK, M., OSICKA, J., CVEK, M., ILCIKOVA, M., SRNEC, P., GORGOL, D., TOFEL, P. Compa a i e s udy o
PVDF shee s and hei sensi i i y o mechanical ib a ions: The ole o dimensions, molecula weigh , s e ching
and poling. Nanoma e ials. 2021, ol. 11, 1637.
[11] SHARMA, M., MADRAS, G., BOSE, S. P ocess induced elec oac i e be a-polymo ph in PVDF: E ec on
dielec ic and e oelec ic p ope ies. Physical Chemis y Chemical Physics. 2014, ol. 16, pp. 14792-14799.
[12] FURUKAWA, T. S uc u e and unc ional p ope ies o e oelec ic polyme s. Ad ances in Colloid and In e ace
Science. 1997, ol. 71-72, pp. 183-208.
[13] TANAKA, H., LOVINGER, A.J., DAVIS, D.D. Miscibili y and isomo phic coc ys alliza ion in blends o e oelec ic
copolyme s o inylidene luo ide and i luo oe hylene. Jou nal o Polyme Science Pa B-Polyme Physics.
1990, ol. 28, pp. 2183-2198.
[14] GREGORIO, R., CHAUD, M.R., DOS SANTOS, W.N., BALDO, J.B. Miscibili y and mo phology o poly( inylidene
luo ide)/poly ( inylidene luo ide)- an- i luo e hylene blends. Jou nal o Applied Polyme Science. 2002, ol. 85,
pp. 1362-1369.
[15] ISSA, A.A., AL-MAADEED, M., LUYT, A.S., MRLIK, M., HASSAN, M.K. In es iga ion o he physico-mechanical
p ope ies o elec ospun PVDF/cellulose (nano) ibe s. Jou nal o Applied Polyme Science. 2016, ol. 133,
43594.
[16] SINGH, H.H., SINGH, S., KHARE, N. Design o lexible PVDF/NaNbO3/RGO nanogene a o and unde s anding
he ole o nano ille s in he ou pu ol age signal. Composi es Science and Technology. 2017, ol. 149, pp. 127-
133.
[17] CVEK, M., KOLLAR, J., MRLIK, M., MASAR, M., SULY, P., URBANEK, M., MOSNACEK, J. Su ace-ini ia ed
mechano-ATRP as a con enien ool o uning o bidispe se magne o heological suspensions owa d ex eme
kine ic s abili y. Polyme Chemis y. 2021, ol. 12, pp. 5093-5105.
[18] CAI, X.M., LEI, T.P., SUN, D.H., LIN, L.W. A c i ical analysis o he alpha, be a and gamma phases in
poly( inylidene luo ide) using FTIR. RSC Ad ances. 2017, ol. 7, pp. 15382-15389.
[19] PAPANANOU, H., PERIVOLARI, E., CHRISSOPOULOU, K., ANASTASIADIS, S.H. Tuning polyme c ys allini y
ia he app op ia e selec ion o ino ganic nanoaddi i es. Polyme . 2018, ol. 157, pp. 111-121.
[20] CARBONE, C., BENWADIH, M., D'AMBROGIO, G., LE, M.Q., CAPSAL, J.F., COTTINET, P.J. In luence o ma ix
and su ac an on piezoelec ic and dielec ic p ope ies o sc een-p in ed BaTiO3/PVDF composi es. Polyme s.
2021, ol. 13, 2166.