Sliding mode con ol o a dc-dc dual ac i e b idge using he gene alized
space-s a e a e aging desc ip ion
A nau D`
o ia-Ce ezo1, Fede ico M. Se a2, Domingo Biel3and Robe G i˜
n´
o4
Abs ac — This pape p esen s a sliding mode con ol s a -
egy o a dc-dc dual ac i e b idge con e e . The con olle
is based on a unca ed model ob ained using he gene alized
s a e space a e aging me hod ha ans o ms he mixed dc-
ac dynamics o he con e e in o a egula ion p oblem. The
p oposed con olle , ha uses a dynamic ex ension o o e come
he s uc u al p oblem o he non-a ine con ol inpu , p o ides
good esul s in e ms o pe o mance and obus ness. Nume ical
simula ions a e included o alida e he p oposed modelling
me hodology and he con ol design.
I. INTRODUCTION
The dual ac i e b idge (DAB) is an isola ed dc-dc con-
e e made o wo ac i e b idges in e connec ed wi h a
high- equency ans o me . This con e e can ha e a h ee-
phase [1] o single-phase opology [2] and he main ea u es
a e high powe densi y, bidi ec ional powe low, gal anic
isola ion, and he possibili y o so swi ching [3]. Due o
he men ioned cha ac e is ics, he DAB con e e is used in
se e al applica ions such as mic og ids [4], [5], elec ic e-
hicles [6], ene gy s o age sys ems [7], solid-s a e ans o me
in medium- ol age and low- ol age dis ibu ion ne wo ks [8]
among o he s.
The DAB con e e is a non-linea dynamical sys em ha
mixes wo dc s ages (inpu and ou pu ) wi h an ac s age in
be ween due o he magne ic ans o me . This makes no
possible o adop he equi alen ci cui model o designing
con ol s a egies and equi es o he modi ica ion he model.
The simples way is o ob ain i s o de nonlinea dynamics
based on he powe low, see [9] o a de ailed discus-
sion on his beha iou al modelling. Many pape s p opose
a linea iza ion a ound he equilib ium poin o ob ain a
con ol-o ien ed model. Then, linea con ol echniques can
be applied such as PI con olle s [10], phase compensa o s
[11], linea obse e s [12], o disc e e- ime linea con olle s
[13]. Some o he pape s p opose nonlinea con ol s a egies,
including passi i y-based echniques [14], [15], he eedback
*This wo k was suppo ed in pa by he Go e nmen o Spain h ough
he Agencia Es a al de In es igaci´
on unde P ojec DPI2017-85404-P and
in pa by he Gene ali a de Ca alunya unde P ojec 2017 SGR 872.
1A nau D`
o ia-Ce ezo is wi h he Dep . o Elec ical Enginee ing and Ins .
o Indus ial and Con ol Enginee ing, Uni e si a Poli `
ecnica de Ca alunya,
Ba celona, Spain. [email p o ec ed]
2Fede ico M. Se a is wi h he Labo a o io de Con ol Au om´
a ico (LCA),
Uni e sidad Nacional de San Luis and CONICET, 5730, Villa Me cedes,
San Luis, A gen ina. [email p o ec ed]
3Domingo Biel is wi h he Dep . o Elec onic Enginee ing and Ins . o
Indus ial and Con ol Enginee ing, Uni e si a Poli `
ecnica de Ca alunya,
Ba celona, Spain. [email p o ec ed].
4Robe G i˜
n´
o is wi h he Dep . o Au oma ic Con ol and Ins . o
Indus ial and Con ol Enginee ing, Uni e si a Poli `
ecnica de Ca alunya,
Ba celona, Spain [email p o ec ed]
linea iza ion app oach [16], o a double in eg al sliding mode
con ol [17].
Al e na i ely, he gene alized s a e space a e aging
(GSSA) me hodology was p oposed o a DAB con e e
in [18] and, la e , ex ended in [19]. The GSSA expansion
was i s ly p esen ed in [20] wi h he aim o cap u ing
he ine de ail o he s a e e olu ion by conside ing a ull
Fou ie se ies. See examples o applica ions in modelling
[21] and con ol [22], [23] o ull-b idge ec i ie s, and a
gene al o e iew o he GSSA echnique applied o powe
con e e s in [24]. Wi h espec o he beha iou al modelling,
he ad an age o using he GSSA app oxima ion is ha
he esul ing model p o ides mo e physical insigh , bu s ill
nonlinea . Se e al linea con olle s ha e been designed using
he GSSA app oxima ion o a DAB con e e : PI- egula o s
[8], [25], op imal Linea Quad a ic Gaussian con ol [26] o
H∞con ol [27]. Nonlinea con ol examples applied o a
GSSA model include passi i y-based con olle s [14], [15].
The a o emen ioned con ol echniques usually ely on he
knowledge o many pa ame e and a iables ha a e used o
he linea iza ion p ocedu e o appea in he eedback con ol
law.
The con ibu ion o his pape is a sliding mode con olle
based on he GSSA model o DAB con e e . The main
ad an ages wi h espec o he p e ious con olle s is ha
he esponse dynamics can be eely designed h ough he
swi ching mani old independen ly o he load and egula ion
pa ame e s. Compa ed wi h [17], he p oposed con ol algo-
i hm does no equi e he exac alues o he DAB con e e
and esul s in a simple implemen a ion.
The emainde o he pape is o ganized as ollows. In Sec-
ion II, a e a b ie in oduc ion o he GSSA me hodology,
he dynamical model o a DAB con e e is p esen ed and i s
GSSA equi alen model is ob ained. The con ol design is
p esen ed in Sec ion III, and Sec ion IV includes an ex ensi e
analysis o he ideal sliding dynamics. Then, some simula ion
esul s a e included in Sec ion V and, inally, he conclusions
a e s a ed in Sec ion VI.
II. GSSA MODEL OF A DUAL ACTIVE BRIDGE
A. GSSA me hodology
The GSSA expansion is an a e aging echnique o powe
con e e s (o a iable s uc u e sys ems in gene al) and aims
o cap u e he ine de ail o he s a e e olu ion by conside ing
a ull Fou ie se ies. Le us de ine he k- h index a e age (o
2021 Eu opean Con ol Con e ence (ECC)
June 29 - July 2, 2021. Ro e dam, Ne he lands
978-94-6384-236-5 ©2021 EUCA 1628
E
iiL
Load
Full-b idge A Full-b idge B
βAβB
Fig. 1: Dual Ac i e B idge con e e .
he k-phaso s) as
hxik( ) = 1
TZ
−T
x(τ)e−jkωτ dτ, (1)
whe e ω= 2π/T and k∈Z. Then, a s a e a iable, x(τ)
du ing he in e al τ∈[ −T, ], can be ep esen ed by i s
Fou ie se ies
x(τ) =
+∞
X
k=−∞hxik( )ejkω .
F om [20], he ime de i a i e o he k- h coe icien is
d
d hxik=hd
d xik−jkωhxik,
and he k- h coe icien o he p oduc o wo a iables,
x( ), y( ), is
hxyik=
+∞
X
l=−∞hxik−lhyil.
Fo sake o simplici y, when clea om he con ex , he
ollowing no a ion is used xk=hxik.
B. The dual ac i e b idge con e e
Figu e 1 shows a simpli ied scheme o he DAB con e e .
I consis s o a wo-po high equency ans o me wi h
a wo ull-b idge swi ches connec ed o each ans o me
winding and a dc- ol age sou ce, E, and a capaci o in he
p ima y and seconda y sides, po s Aand B, espec i ely.
Neglec ing he magne izing cu en o he ans o me and
assuming a ans o me a io o n= 1, he DAB dynamics
can be w i en as [19]
Ldi
d =EβA− βB− i (2a)
Cd
d =iβB−iL,(2b)
whe e iL ep esen s a gene ic load, and con ol signals
βA, βBa e, usually, squa e wa e signals wi h he o m
βA=sign(sin(ω )) (3a)
βB=sign(sin(ω −δ)).(3b)
C. GSSA model o a DAB con e e
Applying he GSSA ans o ma ion o (2a)-(2b)
Ldi1
d =−jωsLi1+EβA1−h βBi1− i1
Cd 0
d =hiβBi0−iL0,
whe e
h βBi1= 1βB0+ 0βB1+ 2¯
βB1+. . .
hiβBi0=i0βB0+¯
i1βB1+i1¯
βB1+. . .
and x−k= ¯xkhas been used. T unca ing o i1, 0one ge s
Ldi1
d =−jωsLi1+EβA1− 0βB1− i1(5a)
Cd 0
d =i0βB0+¯
i1βB1+i1¯
βB1−iL0,(5b)
By using he de ini ion o he a e age phaso s (1), he
ze o- h and i s indices o he con ol signals in (3a)-(3b)
esul s in
βA0= 0, βA1=−j2
π
βB0= 0, βB1=−j2
πe−jδ,
ha eplaced in (5a)-(5b)
Ldi1
d =−( +jωsL)i1−j2
πE+j 0
2
πe−jδ (7a)
Cd 0
d =−j2
π¯
i1e−jδ −i1ejδ−iL0,(7b)
esul ing in a complex- alued second o de nonlinea dynam-
ics. Since 0, iL0∈R, he Equa ion (7b) can be w i en in a
mo e compac way as
Cd 0
d =−I1
4
πsin(θ+δ)−iL0,(8)
yielding a eal- alued nonlinea dynamics whe e I1and θ
co espond o he modulus and a gumen o i1, espec i ely,
i.e., i1=I1ejθ.
The complex- alued dynamics in (7a) can be w i en in
pola coo dina es, sepa a ing hem in o he eal and imag-
ina y pa s. Then, combining (7a) and (8) he DAB model
esul s in
LdI1
d =− I1−2
πEsin θ+ 0
2
πsin(θ+δ)(9a)
dθ
d =−ωs−2
πLI1
Ecos θ+ 0
2
πLI1
cos(θ+δ)(9b)
Cd 0
d =−I1
4
πsin(θ+δ)−iL0.(9c)
Usually, load cu en s a e a mix o esis i e and cons an
powe loads (CPLs),
iL0= 0
RL
+PL
0
,(10)
whe e RLand PLa e load esis ance and he cons an powe
load alues, espec i ely.
III. SLIDING MODE CONTROLLER
A. Dynamic ex ension
Since he sys em is non-a ine wi h he con ol inpu , a
s anda d sliding mode con olle can no be applied. To skip
his s uc u al p oblem, le us ex end he dynamics wi h
dδ
d =u, (11)
whe e uis he new con ol inpu . Then, he o e all dynamics
is de ined by (9) wi h (11).
1629
B. Swi ching mani old
Wi h he new con ol de ini ion, he sys em is ela i e de-
g ee wo and equi es a swi ching mani old wi h a de i a i e
e m. The simples choice is o selec a i s o de dynamics
such as
σ=d 0
d +k1( 0− ∗
0),(12)
whe e k1>0, de ines he ime esponse o he con olle
and ∗
0s ands o he desi ed cons an ol age alue. No ice
ha assigning his linea dynamics he sys em esponse is
unequi ocally de ined by selec ing k1.
C. Sliding mode con olle
The sliding mode con olle is he con ol ac ion equi ed
o each and keep on σ= 0. Di e en ia ing (12) wi h espec
o ime and using (9c) and (11) one ge s
dσ
d = Ψ −4I1
πC cos(θ+δ)u, (13)
whe e, g ouping e ms,
Ψ = −4
πC sin(θ+δ)k1I1+dI1
d −4I1
πC cos(θ+δ)dθ
d
−1
Ck1iL0+diL0
d .(14)
The equi alen con ol, ueq, is de ined as he con ol inpu
gua an eeing ˙σ= 0. Hence, om (13),
4I1
πC cos(θ+δ)ueq = Ψ.(15)
Using (13) and (15) one can w i e
σdσ
d =σ4I1
πC cos(θ+δ)(ueq −u),
and he con ol law
u=k·sign (σcos(θ+δ)) ,(16)
wi h k > |ueq|gua an ees σ˙σ < 0, and he sliding mo ion
on σ= 0 is ensu ed.
The knowledge o he sign o cos(θ+δ)in (16) is
necessa y o ensu e he sliding mo ion. Du ing he nu-
me ical simula ion s age has been obse ed ha he alue
o cos(θ+δ) emains posi i e all ime. Addi ionally, his
con ol ac ion de ines an addi ional (and undesi ed) sliding
su ace a θ+δ=±π
2. In a p ac ical implemen a ion he
ollowing con ol ac ion will be adop ed
u=k·sign (σ).(17)
Figu e 2 shows he esul ing con ol scheme including: he
dynamic ex ension (11), he swi ching mani old (12), and he
swi ching con ol law (17).
IV. IDEAL SLIDING DYNAMICS
Ideal sliding dynamics occu s when ˙σ=σ= 0. Fo an
easy analysis, i is assumed a s a ic load composed by a
esis o and a CPL, so he cu en load is assumed wi h he
o m (10).
Sliding mode con olle
∗
o(12) σ(17) u(11) δ(3a)-(3b)
βA
βB
(2a)-(2b) o
o
Phase
Modula ion DAB
Fig. 2: Con ol scheme.
A. Vol age dynamics
F om he swi ching mani old de ini ions in Sec ion III-B
wi h σ= 0 he ol age dynamics is easily iden i ied as
0(s)
∗
0(s)=k1
s+k1
,
ha co esponds o a i s o de esponse wi h a cons an ime
τ= 1/k1.
B. Remaining sliding dynamics
On ano he hand, using u=ueq in (11) and assuming ha
0 eaches he desi ed alue ∗
0as shown in Sec ion IV-A,
one ge s
dδ
d =πC
4I1
Ψ
cos(θ+δ).
Replacing Ψ om (14), using (10) and a e some algeb a,
I1cos(θ+δ)dθ
d +dδ
d =−sin(θ+δ)k1I1+dI1
d 
−k1
π
4 ∗
0
RL
+PL
∗
0.(18)
Le us de ine he auxilia y a iable
z=I1sin(θ+δ).(19)
Di e en ia ing wi h espec o he ime (19) oge he wi h
(18), he new a iable zexhibi s a i s o de dynamics
dz
d =−k1z−k1
π
4 ∗
0
RL
+PL
∗
0,(20)
ha is s able since k1>0, and s abilises a
z∗=−π
4 ∗
0
RL
+PL
∗
0.(21)
F om (20), one knows ha zasymp o ically ends o z∗,
hus implying ha he ideal sliding dynamics con e ge o
he mani old de ined by
z∗=I1sin(θ+δ).(22)
Assuming ha (22) is eached, and eplacing i in o he
dynamics (9a)-(9b) one ge s
LdI1
d =− I1−2
πEsin θ+ ∗
0
2
πI1
z∗(23a)
dθ
d =−ωs−2
πLI1
Ecos θ+ ∗
0
2
πLI2
1qI2
1−z∗2.
(23b)
Since his sys em is highly non-linea , he s abili y o
he small-signal model a ound an equilib ium poin will
1630
be analyzed. A e some algeb a, he equilib ium poin s,
deno ed by I∗
1, θ∗a e he solu ions o
E2− ∗2
0+ ∗
0z∗ =π
4( 2+ω2
sL2)I∗2
1− ∗
0ωsLqI∗2
1−z∗2,
(24)
and
an θ∗=−π I∗2
1+ 2 ∗
0z∗
−πωsLI∗2
1+ 2 ∗
0pI∗2
1−z∗2.(25)
No ice ha he quad a ic unc ion (24) ha e ou possible
solu ions, bu only posi i e alues a e admissible since I1is
he modulus o i1. On ano he hand, om (23b), pe iodic
solu ions o θ∗a e ob ained.
The Jacobian o (23), e alua ed a he equilib ia yields
JISD =
−
L−2 ∗
0z∗
πI∗2
1LωsI∗
1−2 ∗
o√I∗2
1−z∗2
πLI∗
1
ωs
I∗
1−2 ∗
0z∗2
πI∗3
1L√I∗2
1−z∗2−
L+2 ∗
0z∗
πI∗2
1L

.
The equilib ium poin is locally s able i , and only i , all he
coe icien s o he cha ac e is ic polynomial o JISD,
λ2− (JISD)λ+de (JISD),
ha e he same sign. Then, he wo necessa y and su icien
condi ions o assu e s abili y a ound he equilib ium poin
a e (JISD)<0and de (JISD)>0,
(JISD) = −2
L<0
de (JISD) = ω2
s+ 2
L2−2 ∗
0ωs
πLpI∗2
1−z∗2>0.
The i s condi ion is au oma ically achie ed, since he sec-
ond condi ion de ines a ange o admissible alues. No ice
ha he s abili y does no depends on he con ol gains.
A nume ical example o he ob ained analysis is ca ied
ou using he pa ame e s o he DAB con e e simula ed in
Sec ion V. Wi h a load alues RL= 100 Ω and PL= 100 W,
he auxilia y alue (21)
z∗=−2.277,
ha , om (24) esul s in wo possible cu en alues
I∗
1= 2.282 A
I∗
1= 40.452 A,
wi h de e minan alues
de (JISD) = −3.563 ·1012
de (JISD)=1.229 ·1010,
concluding ha he e exis s wo possible alues o I∗
1, bu
only I∗
1= 40.452 A is s able. Wi h his cu en alue in (25)
θ∗=−3.076 + 2nπ, n ∈Z,
and using (19)
δ∗= 3.0194 + 2nπ, n ∈Z.
Figu e 3 shows he ajec o ies o (23) wi h he pa ame e s
in Sec ion V and RL= 100 Ω and PL= 100 W, o
0 10 20 30 40 50 60 70 80 90 100
-6
-5
-4
-3
-2
-
0
2
Fig. 3: Simula ion esul s: ideal sliding dynamics in (23) o a ba ch o ini ial
condi ions. Ini ial condi ions a e iden i ied wi h a ci cle, and equilib ium
poin s wi h a c oss.
di e en ini ial condi ions. I can be obse ed how ajec-
o ies s abilize a di e en equilib ium poin s wi h alues
(I∗
1, θ∗) = (40.452,−3.076 + 2nπ). The de ini ion o he
egion o a ac ion, i possible, is a mo e complica ed ask
and is le o u u e wo ks.
V. SIMULATIONS RESULTS
Some nume ical simula ions using Ma lab-Simulink ha e
been ca ied ou o es he p oposed con olle . The pa am-
e e s o he DAB con e e we e: C= 1500 µF, L= 8 µH,
= 0.006 Ω,E= 40 V, and he swi ching equency was
= 25 kHz ( hen ωs= 2π ).
The gain o he sliding mode con olle , in (17), was se
o k= 103. The swi ching mani old in (12) is de ined wi h
k1= 2000 ha co esponds o a se ling ime o s= 2 ms.
The simula ion has been un a a ixed s ep size o 5·10−8s
wi h he ode4 (Runge-Ku a) sol e .
A. Simula ions wi h he GSSA model
As a i s s age, he con olle has been es ed using he
GSSA model in (9). The desi ed ol age alue was se o
∗
0= 40 V, he load alues we e RL= 100 Ω and PL=
100 W. The ol age ini ial condi ion was 0(0) = 35 V.
Figu e 4 (bo om) shows ha he sliding mo ion is eached
a e , app oxima ely, 0.5ms and, consequen ly, he ou pu
ol age is egula ed a e 2ms, ollowing he design equi e-
men s. The simula ion esul s shown in Figu e 5 ( op) also
show ha he alue o cos(θ+δ) emains posi i e and close
one. This con im s emo ing ha e m in (16), so ha , o
implemen a ion pu poses, he con olle is u ns o an ou pu
eedback scheme. Finally, as expec ed, he equilib ium alue
o he cu en a iables, I1and θ, a e he ones ob ained
in he nume ical analysis o he ideal sliding dynamics in
Sec ion IV.
B. Realis ic simula ions
In a second s age, he con olle has been simula ed using
he model (2), which implies ha he con ol signals ollow
he wa e o ms in (3). Addi ionally, since = 25 kHz,
1631
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
34
36
38
40
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
-0.6
-0.5
-0.4
-0.3
-0.2
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
-10000
-5000
0
Fig. 4: Simula ion esul s wi h he GSSA model in (9): ( op) he ou pu
ol age, 0, (mid) he phase shi , δand (bo om) he swi ching mani old,
σ.
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
0.96
0.97
0.98
0.99
1
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
37
38
39
40
41
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
0.1
0.15
0.2
0.25
0.3
Fig. 5: Simula ion esul s wi h he GSSA model in (9): ( op) he alue
o cos(θ+δ), (mid) he cu en modulus, I1and (bo om) he cu en
a gumen , θ
he a iable, δ, is sampled wi h T= 40 ns. Wi h he
same con ol pa ame e s om he p e ious Sec ion, he es
consis s in changing he ol age e e ence and he load alues
as ollows:
∗
0=39 V < 5ms
40 V ≥5ms
RL=100 Ω < 20 ms
6 Ω ≥20 ms
PL=


0W < 10 ms
100 W10 ≤ < 15 ms
200 W ≥15 ms
Figu e 6 shows he ou pu ol age, he phase shi con ol
angle and he swi ching mani old. The ol age is egula ed
a he desi ed alue when changing he e e ence alue and
in ace o load changes, wi h he se ling ime o 2ms.
Wi h espec o he p e ious simula ions, high- equency
oscilla ions appea because o he swi ching signals o βA
and βB. The calcula ed GSSA a iables a e shown in Figu e
7. On op, he ex ac ed GSSA ou pu ol age shows a
0 5 10 15 20 25
38.5
39
39.5
40
40.5
0 5 10 15 20 25
-0.6
-0.4
-0.2
0
0 5 10 15 20 25
-6000
-4000
-2000
0
2000
Fig. 6: Simula ion esul s wi h he o iginal model in (2): ( op) he ou pu
ol age, , (mid) he phase shi , δand (bo om) he swi ching mani old, σ.
0 5 10 15 20 25
38.5
39
39.5
40
40.5
0 5 10 15 20 25
38
39
40
41
0 5 10 15 20 25
0
0.1
0.2
0.3
Fig. 7: Simula ion esul s wi h he o iginal model in (2): ( op) he ou pu
GSSA ol age, 0, in ed, (mid) he modulus o he GSSA cu en , I1and
(bo om) he a gumen o he GSSA cu en , θ.
small s eady s a e e o , ha is associa ed o all dis ega ded
ha monics. The GSSA cu en , in pola coo dina es, is shown
in he mid and bo om plo s.
VI. CONCLUSIONS
A sliding based con ol algo i hm is p oposed o a DAB.
The con ol design is based on he GSSA app oxima ion and
includes a dynamics ex ension o sol e he p oblem o ha ing
he inpu wi h a non-a ine o m.
Thanks o he sliding mo ion, he ob ained con olle
allows o eely design he ou pu dynamics, independen ly
o he load changes. Addi ionally, i has been obse ed ha
he dependence on he e m cos(θ+δ)can be emo ed,
esul ing in an ou pu eedback scheme (compa ed wi h he
s a e eedback algo i hm in [17]). In o e all, he con olle
o e s good pe o mance and obus ness esul s .
Fu u e wo ks include he implemen a ion o he con olle
in a eal plan .
REFERENCES
[1] R. W. A. A. De Doncke , D. M. Di an, and M. H. Khe aluwala, “A
h ee-phase so -swi ched high-powe -densi y dc/dc con e e o high-
1632

powe applica ions,” IEEE T ans. on Indus y Applica ions, ol. 27,
no. 1, pp. 63–73, 1991.
[2] R. K. Behe a and O. Ojo, “Modeling and con ol o DAB con e e o
sola mic o-g id applica ion,” in P oc. 6 h In e na ional Con e ence on
Powe Elec onics Sys ems and Applica ions, 2015.
[3] B. Zhao, Q. Yu, and W. Sun, “Ex ended-phase-shi con ol o isola ed
bidi ec ional DC-DC con e e o powe dis ibu ion in mic og id,”
IEEE T ans. on Powe Elec onics, ol. 27, no. 11, pp. 4667–4680,
2012.
[4] F. Es eban, F. Se a, and C. De Angelo, “Con ol o a DC-DC dual
ac i e b idge con e e in DC mic og ids applica ions,” IEEE La in
Ame ica T ansac ions, Ea ly Access.
[5] Q. Xiao, L. Chen, H. Jia, P. W. Wheele , and T. D agince ina, “Model
p edic i e con ol o dual ac i e b idge in na al DC mic og ids
supplying pulsed powe loads ea u ing as ansi ion and online ans-
o me cu en minimiza ion,” IEEE T ans. on Indus ial Elec onics,
ol. 67, no. 6, pp. 5197–5203, 2020.
[6] F. K isme and J. W. Kola , “Accu a e small-signal model o he
digi al con ol o an au omo i e bidi ec ional dual ac i e b idge,” IEEE
T ans. on Powe Elec onics, ol. 24, no. 12, pp. 2756–2768, 2009.
[7] S. Inoue and H. Akagi, “A bidi ec ional DC-DC con e e o an
ene gy s o age sys em wi h gal anic isola ion,” IEEE T ans. on Powe
Elec onics, ol. 22, no. 6, pp. 2299–2306, 2007.
[8] H. Qin and J. W. Kimball, “Closed-loop con ol o DC-DC dual-
ac i e-b idge con e e s d i ing single-phase in e e s,” IEEE T ans.
on Powe Elec onics, ol. 29, no. 2, pp. 1006–1017, 2014.
[9] R. G i˜
n´
o and A. D`
o ia-Ce ezo, “Modelling and simula ion o a
magne ically coupled mul ipo dc-dc con e e ,” in P oc. 24 h In .
Con . on Eme ging Technologies and Fac o y Au oma ion, 2019.
[10] B. P. Baddipadiga and M. Fe dowsi, “Dual loop con ol o elimina ing
dc-bias in a dc-dc dual ac i e b idge con e e ,” in P oc. 3 d In e na-
ional Con e ence on Renewable Ene gy Resea ch and Applica ions,
2014.
[11] D. Das, S. Mish a, and B. Singh, “Design a chi ec u e o con inu-
ous ime con ol o dual ac i e b idge con e e ,” IEEE Jou nal o
Eme ging and Selec ed Topics in Powe Elec onics, Ea ly Access.
[12] D.-D. Nguyen, D.-H. Nguyen, M. Ta, and G. Fuji a, “Senso less
eed o wa d cu en con ol o dual-ac i e-b idge dc/dc con e e o
mic o-g id applica ions,” IFAC-Pape sOnLine, ol. 51, no. 28, pp.
333–338, 2018.
[13] I. Aska ian, S. Bagawade, M. Pahle ani, A. M. Knigh , and
A. Bakhshai, “Robus digi al nonlinea con ol sys em o dual ac i e
b idge (DAB) dc/dc con e e s wi h asymme ic hal -cycle modula-
ion,” IEEE Jou nal o Eme ging and Selec ed Topics in Indus ial
Elec onics, ol. 1, no. 2, pp. 123–132, 2020.
[14] M. Cupelli, S. K. Gu umu hy, S. K. Bhande i, Z. Yang, P. Joebges,
A. Mon i, and R. W. De Doncke , “Po con olled Hamil onian
modeling and IDA-PBC con ol o dual ac i e b idge con e e s o
dc mic og ids,” IEEE T ans. on Indus ial Elec onics, ol. 66, no. 11,
pp. 9065–9074, 2019.
[15] R. V. Mesh am, M. Bhagwa , S. Khade, S. R. Wagh, A. M. S anko ic,
and N. M. Singh, “Po -con olled phaso Hamil onian modeling and
IDA-PBC con ol o solid-s a e ans o me ,” IEEE T ans. on Con ol
Sys ems Technology, ol. 27, no. 1, pp. 161–173, 2019.
[16] E. L. S. da Sil a, A. L. Ki s en, and D. J. Pagano, “Disc e e sps con ol
o a dab con e e using pa ial eedback linea iza ion,” in P oc. IEEE
15 h B azilian Powe Elec onics Con e ence and 5 h IEEE Sou he n
Powe Elec onics Con e ence, 2019.
[17] Y. Jeung and D. Lee, “Vol age and cu en egula ions o bidi ec ional
isola ed dual-ac i e-b idge dc–dc con e e s based on a double-in eg al
sliding mode con ol,” IEEE T ans. on Powe Elec onics, ol. 34,
no. 7, pp. 6937–6946, 2019.
[18] H. Qin and J. W. Kimball, “Gene alized a e age modeling o dual
ac i e b idge dc–dc con e e ,” IEEE T ans. on Powe Elec onics,
ol. 27, no. 4, pp. 2078–2084, 2012.
[19] J. A. Muelle and J. W. Kimball, “An imp o ed gene alized a e age
model o dc–dc dual ac i e b idge con e e s,” IEEE T ans. on Powe
Elec onics, ol. 33, no. 11, pp. 9975–9988, 2018.
[20] S. R. Sande s, J. M. Nowo olski, X. Z. Liu, and G. C. Ve ghese,
“Gene alized a e aging me hod o powe con e sion ci cui s,” IEEE
T ans. on Powe Elec onics, ol. 6, no. 2, pp. 251–259, 1991.
[21] C. Ba lle, E. Fossas, R. G i˜
n´
o, and S. Ma ´
ınez, “Gene alized s a e
space a e aging o po con olled hamil onian sys ems,” in P oc.
IFAC Wo ld Cong ess, 2005.
[22] C. Ga i ia, E. Fossas, and R. G i˜
n´
o, “Robus con olle o a ull-
b idge ec i ie using he IDA app oach and GSSA modeling,” IEEE
T ans. on Ci cui s and Sys ems I, ol. 52, no. 3, pp. 609–616, 2005.
[23] C. Ba lle, A. D`
o ia-Ce ezo, and E. Fossas, “Bidi ec ional powe low
con ol o a powe con e e using passi e Hamil onian echniques,”
In . Jou nal o Ci cui Theo y and Applica ions, ol. 36, no. 7, pp.
769–788, 2008.
[24] S. Bacha, I. Mun eanu, and A. I. B ac u, Powe Elec onic Con e e s
Modeling and Con ol. Sp inge -Ve lag, 2014.
[25] T. L. Nguyen, G. G iepen og, and V. T. Phung, “Modeling and con ol
o dual ac i e b idge con e e wi h wo con ol loops and ou pu
il e ,” in P oc. 43 h Annual Con . o he IEEE Indus ial Elec onics
Socie y, 2017.
[26] M. Cupelli, S. K. Gu umu hy, and A. Mon i, “Modelling and con ol
o single phase DAB based MVDC shipboa d powe sys em,” in P oc.
43 h Annual Con . o he IEEE Indus ial Elec onics Socie y, 2017.
[27] S. K. Gu umu hy, M. Cupelli, and A. Mon i, “S a e space modelling
and con ol o iple phase shi modula ed single phase DAB o
shipboa d powe sys em,” in P oc. 43 h Annual Con . o he IEEE
Indus ial Elec onics Socie y, 2017.
1633