Synthetic Zwitterionic Streptococcus pneumoniae Type 1 Oligosaccharides Carrying Labile O-Acetyl Esters

Oligosaccharides Synthetic Zwitterionic Streptococcus pneumoniae Type 1 Oligosaccharides Carrying Labile O-Acetyl Esters Zhen Wang, Ana Gimeno, Marta G. Lete, Herman S. Overkleeft, Gijsbert A. van der Marel, Fabrizio Chiodo, Jesús Jiménez-Barbero, and Jeroen D. C. Codée* Abstract: We herein report the first total synthesis of the Streptococcus pneumoniae serotype 1 (Sp1) oligosaccharide, a unique zwitterionic capsular polysaccharide carrying labile O-acetyl esters. The target oligosaccharides, featuring rare α-2,4-diamino-2,4,6-trideoxy galactose (AAT) and α-galacturonic acids, were assembled up to the 9-mer level, in a highly stereoselective manner using trisaccharide building blocks. The lability of the O-acetyl esters imposed a careful deprotection scheme to prevent migration and hydrolysis. The migration was investigated in detail at various pD values using NMR spectroscopy, to show that migration and hydrolysis of the C-3-O-acetyl esters readily takes place under neutral conditions. Structural investigation showed the oligomers to adopt a right-handed helical structure with the acetyl esters exposed on the periphery of the helix in close proximity of the neighboring AAT residues, thereby imposing conformational restrictions on the AATα14GalA(3OAc) glycosidic linkages, supporting the helical shape of the polysaccharide, that has been proposed to be critical for its unique biological activity. Introduction Bacterial cell-surface carbohydrates play a significant role in binding events with components of the host immune system,[1,2] and bacterial capsular polysaccharides (CPS) can effectively be used in the generation of carbohydrate-based antibacterial vaccines. Streptococcus pneumoniae (or pneumococcus) is a dreaded alpha-hemolytic Gram-positive pathogen that can cause various types of potentially lethal infections, including pneumonia, septicemia, meningitis, leading to high morbidity and mortality rates worldwide.[3–5] Although antibiotic treatment for most pneumococcal infections is effective, it does induce the evolution of drugresistant pneumococcal bacteria. As early as 1946, the first pneumococcal polysaccharide vaccine was licensed[6] and currently a 23-valent CPS vaccine and 20-valent glycoconjugate vaccine are available to offer protection against the most prevalent serotypes.[7] However, even though these vaccines have been very successful, the immunological mechanism of the different serotypes is not well understood.[8–12] S. pneumoniae type 1 is a highly virulent strain, and it is characterized by a unique CPS, Sp1, that is built up from trisaccharide repeating units, that in turn are composed of the rare α-2,4-di-amino-2,4,6-tri-deoxygalactose (D-AAT) and two α-D-galacturonic acid residues (Figure 1).[13–15] It has been reported that the polysaccharide can carry O-acetyl groups at the C-2 or C-3 positions of the 4linked galacturonic acid residues and that approximately two third of the repeating units carry an acetyl ester.[14] Oacetylation is commonly encountered in bacterial polysaccharides, and the role of this modification can vary.[15,16] It may be an important structural element for recognition by opsonic antibodies but can also shield immunogenic epitopes. It has been proposed that acetylation of Sp1 can impact the conformation and flexibility of the polysaccharide chains although previous models have fallen short in explaining the structural role of these labile functional groups.[17–21] The lability of the O-acetyl groups complicates the isolation of well-defined and pure CPS fragments for structural studies [*] Z. Wang, H. S. Overkleeft, G. A. van der Marel, J. D. C. Codée Leiden Institute of Chemistry, Leiden University Einsteinweg 55, 2333 CC Leiden (The Netherlands) E-mail: [email protected].nl A. Gimeno, M. G. Lete, J. Jiménez-Barbero CIC bioGUNE Bizkaia Technology Park, Building 801A, 48170 Derio (Spain) F. Chiodo Institute of Biomolecular Chemistry, National Research Council (CNR) Pozzuoli, Napoli (Italy) and Amsterdam Infection and Immunity Institute, Department of Molecular Cell Biology and Immunology Amsterdam UMC, Location VUmc, 1007 MB Amsterdam (The Netherlands) J. Jiménez-Barbero Ikerbasque, Basque Foundation for Science, Plaza Euskadi 5, 48009 Bilbao, Bizkaia, Spain J. Jiménez-Barbero Department of Organic Chemistry, II Faculty of Science and Technology, EHU-UPV, 48940 Leioa, Spain J. Jiménez-Barbero Centro de Investigación Biomédica En Red de Enfermedades Respiratorias, Madrid, Spain © 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited. Angewandte Chemie Research Articles www.angewandte.org How to cite: Angew. Chem. Int. Ed. 2023, 62, e202211940 International Edition: doi.org/10.1002/anie.202211940 German Edition: doi.org/10.1002/ange.202211940 Angew. Chem. Int. Ed. 2023,62, e202211940 (1 of 11) © 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH 15213773, 2023, 1, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/anie.202211940 by Universidad Del Pais Vasco, Wiley Online Library on [06/03/2023]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License and the establishment of structure-activity relationships at the molecular level. Migration of O-acetyl groups has been observed between different hydroxyl groups within carbohydrate residues of polysaccharides but also between neighboring carbohydrate rings.[22–24] While biosynthesis enzymes can transfer acetyl esters in a highly regioselective manner, spontaneous migration events can lead to highly heterogeneous sequences. In contrast to naturally sourced oligo/polysaccharides, synthetic oligosaccharides are well defined, uniform molecules, of a single length with predefined substitution patterns, making them expertly suited for structural studies and detailed interaction studies with binding partners.[25–27] Multiple synthetic efforts have been directed at the assembly of Sp1 oligosaccharides, but none have addressed the challenging incorporation of the labile O-acetyl esters.[28,29] The assembly of the Sp1 trisaccharide repeating unit has been reported by multiple groups[30–32] and Bundle and coworkers were the first to report on the synthesis of Sp1 oligomers comprising two trisaccharide repeats.[33] We have reported on the assembly of Sp1-oligosaccharides, up to the dodecasaccharide level and we showed through molecular dynamics (MD) simulations and NMR spectroscopy studies that the oligomers adopt a right-handed helical structure with the nonasaccharide completing a full turn.[34] Kasper and co-workers have linked the helical structure of zwitterionic polysaccharides to their unique capacity to bind to MHC-II molecules, eliciting a T-cell mediated immune response.[35] The Sp1 polysaccharide represents major synthetic challenges, amongst which are the presence of the rare 2acetamido-4-amino-2,4,6-trideoxy-D-galactose (D-AAT), the galacturonic acids, which are well known to be significantly less reactive in glycosylation reactions than their nonoxidized galactose counterparts, and the cis-glycosidic linkages that connect all monosaccharides. Although the presence of the O-acetyl esters represents only a small structural modification, the incorporation of these labile esters presents an additional major hurdle, because of the migratory aptitude of these groups[22–24] and because their presence significantly limits protecting group manipulations as well as options for final deprotection chemistries. We here describe the development of a synthetic route to generate acetylated Sp1 fragments ranging in length from a trisaccharide to a nonasaccharide, which have been synthesized in multi-milligram amounts to allow for detailed structural studies. Molecular dynamics (MD) simulations and NMR spectroscopy were used to probe the 3-dimensional structure of the Sp1 oligosaccharides. These revealed that the oligomers adopt a stable helical structure with the C-3-O-acetyl groups being positioned on the outside of the helix and close enough to the neighboring AAT-residues to provide an additional barrier for restricting the rotation of the AATα1-4GalA(3OAc) glycosidic linkages. The stability of the O-acetyl groups has been assessed by NMR spectroscopy at different pH values to show that they migrate readily at neutral and slightly basic pH, while being stable for prolonged period of time at slightly acidic pH (>1 year). Results and Discussion The acetylated Sp1-fragments targeted in this study (trimer 1, hexamer 2and nonamer 3) are shown in Scheme 1. We previously reported a route towards the de-OAc-Sp1 oligosaccharides, combining a pre-glycosylation oxidation strategy with a post-glycosylation oxidation approach, to minimize the difficult oxidation events required on large oligosaccharides while enabling a robust and highly stereoselective glycosylation protocol.[34] A Birch-type reduction was employed at the end of the synthesis to unmask all benzyl-type protecting groups. Taking the acetyl groups in the target compounds 1–3into consideration, this global deprotection scheme can obviously not be used and therefore a hydrogenation step will be required at the end of the synthesis. We decided to incorporate a vicinal diol terminated spacer to enable future conjugation chemistry after a selective oxidation by a Malaprade reaction.[36,37] Building on our previously synthetic strategy, we set out to use trisaccharide 7as the key building block (Scheme 1). This building block features a silylidene protected galactose donor moiety, that allows for the reliable, stereoselective formation of the required cis-glycosidic linkages. To minimize oxidation events in the oligosaccharide stage the building block contains a galacturonic acid in the middle. The galacturonic acid also carries a C-3-O-acetyl group that has to be maintained through the assembly. Trisaccharide 7 can be obtained from the monomeric building blocks 8–10. We started our synthesis with the assembly of the required monomeric building blocks 8–10 as depicted in Scheme 2. The synthetic route to provide the rare 2acetamido-4-amino-2,4,6-trideoxy-D-galactose (D-AAT) building block 8,[38,39] was optimized and started from 6deoxy mannose 11[34,39] (Scheme 2A). We installed a bulky TIPS group at the C-3-OH, after which the diol was triflated and the C-2and C-4-O-triflates were subsequently substituted with an azide and ammonia respectively. After Cbzprotection of the C-4-amine, AAT building block 13 was obtained in 62% from diol 12. For comparison, our old route using a C-3-O-acetyl and potassium phthalimide instead of ammonia, provide the corresponding C-3-O-acetyl AAT building block in only 21% yield.[34] Desilylation, levulinoylation and transformation of the thiophenol group Figure 1. The structure of Sp1. Angewandte Chemie Research Articles Angew. Chem. Int. Ed. 2023,62, e202211940 (2 of 11) © 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH 15213773, 2023, 1, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/anie.202211940 by Universidad Del Pais Vasco, Wiley Online Library on [06/03/2023]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License into the corresponding N-phenyl trifluoroacetimidate then provided building block 8. The required galacturonic acid synthon 9was obtained from known C-2-O-benzyl galactose 15[34] by silylation of the primary alcohol, after which the C-3-OH was regioselectively acetylated by treating the diol with a catalytic amount of dimethyltin dichloride, di-iso-propyl ethylamine (DiPEA) and acetylchloride (Scheme 2B).[40,41] After treatment of the resulting alcohol with HF-pyridine, diol 16 was obtained that was regioand chemoselectively oxidized using the TEMPO/BAIB combination. Benzylation of the so-formed carboxylic acid delivered galacturonic acid 17 of which the C-4-OH was masked with a levulinoyl ester. Transformation of the thiophenol 18 into the N-phenyl trifluoroacetimidate completed the synthesis of the central galacturonic acid building block 9. The silylidene-protected galactose building block 10 was assembled as previously described.[34] With all building blocks in hand, the synthesis of the oligosaccharides commenced with the assembly of trisaccharide target 1(Scheme 2C). First, the glycosylation between imidate galacturonic acid donor 9and galactose acceptor 10 was performed in the presence of TBSOTf to provide disaccharide 19 in 75% yield with excellent stereoselectivity. Subsequently, selective deprotection of the levulinoyl protecting group was effected by treatment of the disaccharide with hydrazine acetate under acidic conditions to prevent migration of the C-3’-acetate, to deliver the C4’- OH disaccharide 20 in 95% yield. Next, the glycosylation between acceptor 20 and AAT building block 8was carried out under the promotion of TBSOTf to provide 21 in 82% yield and a 5/1 α/β-ratio. The anomers could be separated at this stage and the synthesis was continued with the hydrolysis of the thioglycoside moiety using NIS-TFA,[42] to provide the corresponding hemiacetal 22, which was followed by installation of the imidate moiety delivering the pivotal trisaccharide imidate donor 7. Next, the spacer, R5,6-bis(benzyloxy)hexan-1-ol 23, prepared according to literature procedures,[43,44] was attached to the trisaccharide. Under control of the bulky silylidene, the glycosylation proceeded smoothly to furnish 24 in 85% yield with complete stereoselectivity. Subsequently, the levulinoyl group was cleaved by using hydrazine monohydrate to provide the trisaccharide 25 in excellent yield. Reduction of the azide group using a Staudinger reaction, was followed by selective N-acetylation to provide acetamide 26 in quantitative yield. Triol intermediate 4could then be prepared in 95% yield from 26 by treatment with hydrogen fluoride in pyridine. The regioselective oxidation to provide the carboxylic moiety proceeded uneventfully and was achieved using the TEMPO-BAIB oxidation system in a tert-butanol-DCMwater mixture at 4°C, which was followed by benzylation using BnBr in DMF to provide trisaccharide 27 in 81% yield. To complete the synthesis of the trisaccharide target 1, all benzyl ethers, the benzyl esters and the benzyl carbamate were removed through a hydrogenation reaction using Pd(OH)2as a catalyst. After purification by gel filtration column, however, the product proved to be impure and NMR analysis indicated the presence of side products, in which the acetyl group had migrated (1a) or was hydrolyzed (1b) (see Scheme 2D). The labile acetyl group in the trisaccharide apparently cannot withstand the slightly basic conditions used for the size exclusion chromatography for which an aqueous NH4OAc solution was used as eluent.[22–24] Therefore, we checked the integrity and purity of the trisaccharide immediately after the hydrogenation reaction. After filtration of the Pd-catalyst and concentration, the trisaccharide proved to be pure and no sign of acetyl migration was detected by NMR spectroscopy. Having successfully assembled the trisaccharide, we moved to the preparation of longer oligomers (See Scheme 3A). Hexasaccharide 28 was synthesized using 26 and 7 in a TBSOTf mediated [3+3] glycosylation in 83% yield as a Scheme 1. Retrosynthetic analysis for the assembly of target compounds 1–3. Bn=benzyl, Cbz=carbobenzyloxy. Angewandte Chemie Research Articles Angew. Chem. Int. Ed. 2023,62, e202211940 (3 of 11) © 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH 15213773, 2023, 1, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/anie.202211940 by Universidad Del Pais Vasco, Wiley Online Library on [06/03/2023]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License Scheme 2. A) Synthesis of D-AAT building block 8. B) Synthesis of the central C-3-O-acetyl galacturonic acid building block 9. C) Assembly of trisaccharide 1. D) Migration and hydrolysis of the C-3’-O-acetyl ester. Reagents and conditions: a) TIPSCl, imidazole, DMF, 0°C to rt, 88%; b) i, Tf2O, Py, DMAP, DCM, 10°C to 10°C; ii, TBAN3, MeCN, 30°C! 20°C; iii, 7 N NH3in MeOH; iv, CbzCl, Na2CO3, THF, H2O, 0°C to rt; four steps 62%; c) TBAF, AcOH, THF, quant.; d) LevOH, EDCI, DMAP, DCM, 14, 91%; 18, 99%; e) NIS, TFA, DCM, 0°C, 8b, quant.; 9a, 96%; 22, 95%; f) N-phenyltrifluoroacetimidoyl chloride, Cs2CO3, acetone, 8, 79%; 9, 91%; 7, 94%; g) TBDPSCl, imidazole, DMF, 96%; h) AcCl, Me2SnCl2, DIPEA, ThF; i) HFPy, THF, Py, 0°C, 85% (two steps); j) i, TEMPO, BAIB, DCM, t-BuOH, H2O; ii, BnBr, Cs2CO3, DMF, 17, 77%; 27, 81% (over two steps); k) TBSOTf, DCM, 5Å MS, 0°C, 19, 75%; 21, 82% (αanomer, 68%; βanomer, 14%); 24, 85%; l) N2H4·AcOH, AcOH, THF, MeOH, 0°C, 95%; m) N2H4·H2O, pyridine, AcOH, 0°C!RT, 95%; n) i, PPh3, pyridine, H2O, THF, 70°C, 7 h; ii, Ac2O, NaHCO3, THF, H2O, quantitative; o) Pd(OH)2/C, H2,t-BuOH, H2O, 3 days, quantitative. BAIB=bis(acetoxy)iodobenzene, DCM=dichloromethane, DIPEA=N,N-diisopropylethylamine, DMAP=4-dimethylaminopyridine, DMF=N,N-dimethylformamide, EDCI=1-(3-dimethylaminopropyl)-3-ethylcarbodiimide, NIS=N-iodosuccinimide, Py=pyridine, TBAF=tetrabutylammonium fluoride, TBAN3=tetrabutylammonium azide, TBDPS=tert-butyldiphenylsilyl, TBS=tertbutyldimethylsilyl, TEMPO=2,2,6,6-tetramethylpiperidin-1-oxyl, Tf=trifluoromethanesulfonyl, TFA=trifluoroacetic acid, TIPS=triisopropylsilyl. Angewandte Chemie Research Articles Angew. Chem. Int. Ed. 2023,62, e202211940 (4 of 11) © 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH 15213773, 2023, 1, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/anie.202211940 by Universidad Del Pais Vasco, Wiley Online Library on [06/03/2023]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License single diastereoisomer. Removal of the levulinoyl group using hydrazine monohydrate, as described for the synthesis of 25, furnished hexasaccharide 29. Subsequently, a [3+6] glycosylation and delevulination cycle was carried out to uneventfully provide the nonasaccharide 31 in excellent yield. Following the synthetic approach for trisaccharide target 1, a similar functionalization and deprotection sequence was performed with hexasaccharide 29 and nonasaccharide 31 to provide the partially protected hexasaccharide 5and nonasaccharide 6, respectively. Previously we noticed that the regioselective oxidation of multiple primary alcohols in the oligosaccharides became increasingly difficult with increasing substrate length. When the oxidation conditions, as previously optimized,[34] were applied on hexasaccharide 5, containing five free hydroxyls, the required product was formed in moderate yield and a major side product was isolated. The structure of this compound was elucidated using NMR and HRMS analysis and proved to be truncated disaccharide 36e. A possible mechanism for the formation of this trisaccharide is shown in Scheme 3B.[45] Apparently, the oxidative conditions led to cleavage of the glycosidic bond at the junction of the trisaccharide repeating units. This would lead to two trisaccharide fragments 36a, and 36b. The hemiacetal 36b can undergo a further oxidation to the di-acid 36c, the diol of which can be oxidatively cleaved to provide, after another oxidation, diacid 36d, which upon benzylation with phenyldiazomethane then provides 36e. The formation of this side product indicated that the long reaction time (3 days) and the large excess of oxidants used for the oxidation were too harsh for Scheme 3. A) Assembly of targets 2and 3. B) Oxidative cleavage leading to fragmentation of the oligosaccharides. Reagents and conditions: a) TBSOTf, DCM, 5Å MS, 0°C, 28, 83%; 30, 85%; b) N2H4·H2O, pyridine, AcOH, 0°C!RT, 29, 94%; 31, 89%; c) i, PPh3, pyridine, H2O, THF, 70°C, 7 h; ii, Ac2O, NaHCO3, THF, H2O, 32, 88%; 33, 99%; d) HF·Py, THF, pyridine, 0°C, 5, 92%; 6, 96%; e) i, TEMPO, BAIB, t-BuOH, H2O, NaHCO3, EtOAc or MeCN, 4°C, 1 day; ii, PhCHN2, DCM, 34, 58%; 35, 66% (over two steps); f) Pd(OH)2/C, H2,t-BuOH, 0.1% AcOH in H2O, 3 days, 2, 91%; 3, 90%. Angewandte Chemie Research Articles Angew. Chem. Int. Ed. 2023,62, e202211940 (5 of 11) © 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH 15213773, 2023, 1, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/anie.202211940 by Universidad Del Pais Vasco, Wiley Online Library on [06/03/2023]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License the substrate. Therefore, shorter reaction times were explored and the reaction was carefully monitored by thinlayer chromatography from 10 h to 3 days. This indicated a reaction of 24 h to be optimal for the conversion of 5into 36a. This way, hexasaccharide 34 was obtained in 58% yield after a reaction with the TEMPO/BAIB reagent combination for 24 h at 4°C in a t-BuOH-water-EtOAc solvent system, followed by a benzylation using phenyldiazomethane. Similarly, the three primary alcohols of the nonasaccharide 6were oxidized and benzylated to provide the corresponding nonamer 35 in 66% yield over two steps. Cleavage of the nonasaccharide under the oxidative conditions could not be completely prevented as revealed by LC–MS analysis of the reaction mixture, which showed the formation of triand hexasaccharide fragments, including 27 and 34. The formation of these side products confirms the regioselectivity of the cleavage reactions, taking place at the anomeric center of the galactose residues that have to be oxidized. The mechanism for the oxidative glycosidic bond cleavage remains to be established. Unfortunately, the deprotection procedure used to prepare trisaccharide 1from 27 was not suitable for the hexasaccharide, and acetyl migration and hydrolysis were detected by NMR and LC–MS analysis. After careful optimization of the solvent systems used and closely monitoring the pH of the reaction mixture, we managed to achieve the global deprotection by performing the hydrogenation under mild acidic conditions to provide the target hexasaccharide 2in 91% and nonasaccharide 3in 90% yield (Scheme 3A). The syntheses of the acetylated oligomers clearly indicated the C-3-O-acetyl to be very labile. To evaluate the stability of the acetyl group more accurately, a set of NMR experiments was set up. NMR analyses were performed on samples of 1in deuterated phosphate buffers at different pD values (pD=pH+0.4), ranging from pD 5.0 to pD 8.0 using the diagnostic peaks for H3 and H2 of the acetylated GalA residue (1:δ=5.33 ppm H3(OAc); 1a:δ=5.01 ppm H2- (OAc); 1b:δ=4.10 H3(OH)). Trisaccharide 1a was formed as an intermediate during these experiments and was not isolated. The assignment of this structure was based on the characteristic chemical shifts of the mentioned protons and comparison to literature values[14] (See Supporting Information for full details). As shown in Figure 2 and Scheme 2D, the acetyl group can migrate and hydrolyze from 1to 1a and 1b under slightly basic conditions (pD=8.0), and migration was also possible, albeit very slowly, at pD 7.0, indicating the acetyl to be labile under basic, neutral and slightly acidic (pH 6.6) conditions. Of note, we did not observe any migration to the AAT nitrogen atom. At pD=8.0 the 3OAc $ 2-OAc migration was fast (Figure 2), with more than 50% of the 3-OAc migrating in 15 days.[23,24] After 380 days the ratio of 1,1a and 1b was approximately 5:5:90. At lower pD (pD=5.0 and 6.0) no migration or hydrolysis was observed over a period as long as 380 days. These migration and cleavage studies underpin the requirement for slightly acidic conditions during the deprotection of the oligosaccharides. They also indicate that care should be taken when interaction studies are performed with these synthetic fragments or during isolation and manipulation of naturally sourced Sp1-polysaccharides. Structural studies With the three target oligosaccharides in hand, we set out to probe their structure. All 1H NMR resonances of trimer 1 were assigned through standard TOCSY, NOESY and Figure 2. O-Acetyl migration and hydrolysis in trisaccharide 1at pD=5.0, 6.0 (A), 7.0 (B), or 8.0 (C). Angewandte Chemie Research Articles Angew. Chem. Int. Ed. 2023,62, e202211940 (6 of 11) © 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH 15213773, 2023, 1, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/anie.202211940 by Universidad Del Pais Vasco, Wiley Online Library on [06/03/2023]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License HSQC experiments. Notably, all ring protons of acetylated GalA residue showed downfield-shifted resonances compared with the de-O-acetylated Sp1 oligomers we previously assembled. In addition, the NOESY spectrum of the Oacetylated trimer showed key inter-residue cross-peaks which allowed us to unequivocally define the conformation of the trimer (Figure 3A). The NOEs for the H1AAT-H4GalA- (3OAc), H1GalA(3OAc)-H3GalA, and H1GalA(3OAc)-H4GalA proton pairs defined exo-syn-Φ/syn-Ψconformations around the glycosidic linkages. Fittingly, MD simulations predicted exosyn-Φ/syn(+)-Ψand exo-syn-Φ/syn()-Ψconformations for the AAT-(α1–4)-GalA(3OAc) and GalA(3OAc)-(α1–3)- GalA glycosidic linkages, respectively, and they remained considerably stable along all the trajectory (Figure 3B and C). The proton signal of H5 of AAT shifted upfield due to the presence of the OAc group, while the AAT C6-CH3 group appeared to be more deshielded appearing at a higher chemical shift. The MD simulation revealed that the AAT- (α1-4)-GalA(3OAc) glycosidic linkage showed rather low flexibility while the GalA(3OAc)–(α1-3)-GalA linkage was more flexible, with continuous transitions between syn()-Ψ and syn(+)-Ψconformers occurring along the entire simulation. The NOE-estimated inter residual proton-proton distances matched well with the average distances derived from the MD simulation. Next, a similar analysis was performed for the hexasaccharide 2and nonasaccharide 3using NOESY experiments in combination with MD simulations to analyze their conformational features. Noteworthy, the H1-H4 proton signals of all GalA(3OAc) residues were shifted downfield, highlighting the perturbation upon the introduction of the 3OAc groups. As observed for the trimer, the AAT H5 protons were shifted to higher field, while all AAT C6-CH3 signals appeared at a higher chemical shift as compared to the non-acetylated structures. NOESY experiments indicated that the exo-syn-Φ/syn-Ψconformations around AAT- (α1-4)-Gal(3OAc), Gala(3OAc)-(α1-3)-GalA, and GalA- (α1-3)-AAT glycosidic linkages were the most populated (Figure 4A,B). 500 ns MD simulations supported these results and described rather similar conformational features for the longer oligosaccharides with exo-syn-Φ/syn(+)-Ψ, exo-syn-Φ/syn(�)-Ψ, and exo-syn-Φ/syn()-Ψconformations for the AAT-(α1-4)-GalA(3OAc), Gala(3OAc)-(α1-3)- GalA, and GalA-(α1–3)-AAT linkages, respectively (FigFigure 3. A) Superimposition of the HSQC spectra of the O-acetylated Sp1 trimer (in black) and the de-O-acetylated homologue (in red). B) Expansion of the NOESYspectrum of trisaccharide 1. Key cross-peaks defining the conformation around the glycosidic linkages are indicated. C) 10 snapshot superimposition and Φ/Ψmaps of the conformations explored along the 500 ns MD simulation of trisaccharide 1. Angewandte Chemie Research Articles Angew. Chem. Int. Ed. 2023,62, e202211940 (7 of 11) © 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH 15213773, 2023, 1, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/anie.202211940 by Universidad Del Pais Vasco, Wiley Online Library on [06/03/2023]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License ure 4C, 5A). Thus, as observed for the de-O-acetylated Sp1 fragments, the addition of repeating units does not alter the conformational flexibility around each glycosidic linkage. The MD simulations allowed us to analyze the global structure of the oligosaccharides revealing them to adopt an extended conformation, where on average the nonamer is three times as long as the trimer as defined by the interresidue distances (Figure 5C). Interestingly, nonamer 3 displayed a right-handed helical structure, with eight residues completing a full turn (spanning ca. 25 Å, figure 5B). This structure is almost identical to the one described for its non-acetylated counterpart and no major conformational changes could be observed. The GalA- (3OAc) acetyl groups are solvent-exposed and in close proximity to the C6-CH3groups of the neighboring AAT residues, explaining the deshielding effects observed by Figure 4. A) Expansion of NOESYspectrum of hexamer 2. B) Expansion of the NOESYspectrum of nonamer 3. Key cross-peaks defining the conformation around the glycosidic linkages were indicated. C) Φ/Ψmaps and superimposition of representative structures explored along the 500 ns MD simulation of hexamer 2. Angewandte Chemie Research Articles Angew. Chem. Int. Ed. 2023,62, e202211940 (8 of 11) © 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH 15213773, 2023, 1, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/anie.202211940 by Universidad Del Pais Vasco, Wiley Online Library on [06/03/2023]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License NMR. Indeed, the vicinity of the O-acetyl groups to the AAT methyl group may provide an additional barrier for the free rotation around the AAT-(α1-4)-Gal(3OAc) glycosidic linkage, then hampering the access to other (higherenergy) conformations and thus stabilizing the helix. The close proximity of the methyl groups of the GalA(3OAc) acetyl and C6-CH3groups of the neighboring AAT residues creates hydrophobic patches on the periphery of the OAcSp1 helix, which may play a role in the interaction with antiSp1 antibodies. Conclusion In conclusion, three O-acetylated Sp1 fragments, a trisaccharide, hexasaccharide and nonasaccharide were successFigure 5. A) Φ/Ψmaps and superimposition of representative structures explored along the 500 ns MD simulation of and nonamer 3. B) Molecular model of nonamer 3where the acetyl groups were highlighted as balls. C) Average values of RoG and inter-residue distances Rn-R1for the three oligomers, measured from the center of mass of every residue. The standard deviation is indicated in parentheses. R1is the residue at the reducing end. Angewandte Chemie Research Articles Angew. Chem. Int. Ed. 2023,62, e202211940 (9 of 11) © 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH 15213773, 2023, 1, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/anie.202211940 by Universidad Del Pais Vasco, Wiley Online Library on [06/03/2023]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License