Dendrimers: Exploring Their Wide Structural Variety and Applications

Citation: Pérez-Ferreiro, M.; M. Abelairas, A.; Criado, A.; Gómez, I.J.; Mosquera, J. Dendrimers: Exploring Their Wide Structural Variety and Applications. Polymers 2023,15, 4369. https://doi.org/10.3390/ polym15224369 Academic Editor: Chie Kojima Received: 14 September 2023 Revised: 6 November 2023 Accepted: 7 November 2023 Published: 9 November 2023 Copyright: © 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/). polymers Review Dendrimers: Exploring Their Wide Structural Variety and Applications María Pérez-Ferreiro †, Adrián M. Abelairas †, Alejandro Criado, I. Jénnifer Gómez * and Jesús Mosquera * CICA—Centro Interdisciplinar de Química e Bioloxía, Universidade da Coruña, Rúa as Carballeiras, 15071 A Coruña, Spain *Correspondence: i.jennifer[email protected] (I.J.G.); [email protected] (J.M.) †These authors contributed equally to the work. Abstract: Dendrimers constitute a distinctive category of synthetic materials that bear resemblance to proteins in various aspects, such as discrete structural organization, globular morphology, and nanoscale dimensions. Remarkably, these attributes coexist with the capacity for facile large-scale production. Due to these advantages, the realm of dendrimers has undergone substantial advancement since their inception in the 1980s. Numerous reviews have been dedicated to elucidating this subject comprehensively, delving into the properties and applications of quintessential dendrimer varieties like PAMAM, PPI, and others. Nevertheless, the contemporary landscape of dendrimers transcends these early paradigms, witnessing the emergence of a diverse array of novel dendritic architectures in recent years. In this review, we aim to present a comprehensive panorama of the expansive domain of dendrimers. As such, our focus lies in discussing the key attributes and applications of the predominant types of dendrimers existing today. We will commence with the conventional variants and progressively delve into the more pioneering ones, including Janus, supramolecular, shape-persistent, and rotaxane dendrimers. Keywords: traditional dendrimers; Janus dendrimers; supramolecular dendrimers; shape-persistent dendrimers; rotaxane dendrimers 1. Introduction Dendrimers are hyper-branched macromolecules characterized by large numbers of end-group functionalities and a compact molecular structure. They consist of a central core molecule where multiple branches emerge, giving rise to a hierarchical and well-defined architecture. The branches consist of repeated units or monomers that are chemically linked together in a controlled manner. Since their introduction in the 80s [ 1 ], this revolutionary class of materials has played a pivotal role in pushing the boundaries of polymer chemistry, effectively bridging the gap between synthetic and biological polymers. Remarkably, dendrimers exhibit a plethora of exceptional properties that bear striking resemblance to those of biological macromolecules, notably proteins. These properties encompass the following: (i) Monodispersity : Dendrimers can be synthesized as monodispersed materials, resulting in a uniform and well-defined molecular weight distribution. Dendrimers’ monodispersity contributes to their functionality and reliability in various applications. (ii) Nanometer size : The size of dendrimers depends on their generation (vide infra), but in general, they are several nanometers big, i.e., very similar to proteins. This is a relevant advantage with respect to molecules since a large surface can be applied to performing multivalency interactions that determine their biological behavior. (iii) Globular shape : Dendrimers possess a characteristic globular shape, which arises from their highly branched and symmetric structure. This globular architecture is crucial to their interactions with other molecules. Polymers 2023,15, 4369. https://doi.org/10.3390/polym15224369 https://www.mdpi.com/journal/polymers Polymers 2023,15, 4369 2 of 23 (iv) Adaptable surface : Dendrimers offer a customizable platform for the attachment of an extensive array of molecules. This process of functionalization empowers precise modulation of their physicochemical attributes and governs molecular interactions transpiring upon their surfaces. (v) Presence of cavities : The globular shape of dendrimers creates internal cavities or void spaces within their structure. These cavities can accommodate guest molecules, drugs, or other functional moieties, providing a controlled and protected environment. The remarkable properties of dendrimers, reminiscent of biological polymers, have opened up vast possibilities in diverse fields, including nanotechnology, medicine, catalysis, and materials science. Recent years have witnessed the publication of a few reviews that have extensively explored the properties and applications of the most traditional dendrimers [ 2 – 5 ], i.e., polyamidoamine (PAMAM), poly(propylene imine) (PPI), polylysine (PLL), and polyester dendrimers. In contrast, our review aims to distinguish itself by shedding light on the emerging and innovative variants of dendrimers. Specifically, our study is dedicated to elucidating the characteristics and potential applications of novel dendrimer types. By expanding the scope of information, we seek to contribute to a comprehensive understanding of the diverse and evolving landscape of dendrimer research. 2. Dendrimer Structure The physicochemical properties of dendrimers are determined by the three constituent parts: the core, the branches, and the end-group functionalities. While exceptions exist, it is generally observed that the core has a relatively lower impact on properties such as solubility, polarity, or the ability of the dendrimer to interact with molecules. However, besides its structural role, the core molecule can endow the dendrimer with additional capabilities. For example, porphyrins have been applied as dendrimer cores, resulting in dendrimers with fluorescence emission and photosensitizing features [ 6 ]. Another example is the utilization of cyclophane as the core, which allows the dendrimer to encapsulate specific molecules [7]. On the contrary, the chemical nature of the branches significantly influences the following dendrimer properties: (i) Synthesis : Different types of branches, such as amine-, ester-, or ether-based branches, require specific synthetic methodologies to achieve the desired dendrimer architecture. Careful selection of branching units allows for precise control over dendrimer growth, size, generation, and molecular structure. (ii) Flexibility : Branching units greatly affect the rigidity and flexibility of dendrimers. Rigid branches, like aromatic or bulky groups, lead to more rigid dendrimers, while flexible or aliphatic branches introduce greater flexibility [7]. (iii) Porosity : The properties of the branches impact the accessibility of molecules to the dendrimer’s interior. Branches with low solubility in a solvent can cause dendrimers to contract and restrict the solvent’s accessibility to the dendrimer’s interior, also affecting the capabilities of the dendrimer to encapsulate molecules. (iv) Stability : Some branches have chemical groups that can be unstable in certain conditions, for example, under heating. Other ones, such as ester or amide bonds, can be broken by enzymes, making the dendrimer biodegradable. Finally, the end-group functionalities are the ones located at the outermost ends of the dendrimer branches, and determine the surface properties, reactivity, and interactions of the dendrimers with other molecules. They significantly influence the overall behavior of dendrimers, including control over solubility. By carefully selecting the appropriate end-groups, dendrimers can be tailored to exhibit water solubility or solubility in organic solvents [ 8 ]. The remarkable chemical diversity of end-group functionalities allows virtually any molecule to be attached as a terminal group, offering limitless possibilities for customizing dendrimers with specific properties and functionalities. Importantly, the number of end-group functionalities and the dendrimer size is mainly determined by the generation of the dendrimer, i.e., the number of repeated branching cycles that are Polymers 2023,15, 4369 3 of 23 performed during its synthesis. Each generation adds a layer of branches, increasing the overall size and the number of end-group functionalities. In conclusion, the properties of the dendrimers are mainly determined by (i) the generation (G1, G2, G3, . . . ), (ii) the chemical nature of the branches, e.g., PAMAM, PPI, etc., and (iii) the end-group functionalities (Figure 1). Figure 1. Schematic representation of the main parameters that determine the properties of a dendrimer. (Adapted from Ref. [9]). 3. Synthesis of Dendrimers Two primary approaches for dendrimer formation have been defined: convergent and divergent [ 10 ]. Each of these approaches carries unique advantages and notable distinctions. The meticulous selection of a suitable strategy stands as a pivotal factor, as it will define the distinctive characteristics of the macromolecule in each scenario. 3.1. Divergent Approach This methodology reported by Tomalia et al. [ 1 ] is based on the stepwise growth of dendrimers, starting from a core containing diverse binding groups. Sequential reactions are then performed to expand the dendrimer over several generations, depending on the specific sequences applied. These reactions can involve various functional groups, such as amines, boronic acids, alcohols, among others, but they all follow a similar procedure (Figure 2a). The process initiates with a reaction at the core, employing non-reactive functional groups that appear Polymers 2023,15, 4369 4 of 23 at the periphery of the newly formed macromolecule. Subsequently, a deprotection or activation step is undertaken to convert these peripheral groups into reactive entities, which facilitates the subsequent reaction. This iterative process is repeated for subsequent generations until the final dendrimer is achieved. Figure 2. Cartoon representation of ( a ) divergent and ( b ) convergent synthesis. Reprinted with permission from ref. [11]. Copyright 2019 American Chemical Society. The main advantage of this methodology lies in its capability to generate vast and complex structures via the exponential growth of the dendrimer in each generation. This property also aids in the purification process, as the substantial difference in size between the dendrimer and monomers facilitates their separation. However, a significant challenge arises from the possibility of side reactions occurring in some dendrimers at each step. This is attributed to the increasing number of reactive groups with each successive generation. Consequently, the final yield of each generation is diminished, leading to the formation of dendrimers with structural defects due to the presence of by-products [12]. To counteract the exponential increase in reactive groups and to minimize the formation of by-products, the use of a substantial excess of monomers in each step of the approach is necessary. This excess ensures that the desired reactions are favored and helps reduce unwanted side reactions. 3.2. Convergent Approach This methodology, initially reported by Hawker and Fréchet in 1990 [ 13 ], involves the stepwise formation of different branches, known as dendrons, which ultimately culminates in the synthesis of the dendrimer’s final macrostructure via a final bond with the core. The synthesis of these dendrons follows a process like the divergent approach (Figure 2b) . The primary advantage of this approach is the improved control over the dendrimer’s structure, thanks to the smaller size of the dendrons compared to the dendrimer itself. This necessitates fewer equivalents of monomer in each synthesis step and a reduced formation of by-products during the reactions can be observed. Enhanced control also enables the precise introduction of the desired functional groups at the dendrimer’s periphery, which significantly impacts the final properties of the macromolecule [14]. However, a notable drawback is the steric hindrance encountered during the final coupling of the dendrons with the core. The large size of the dendrons impedes the reaction of other branched arms, limiting the formation of dendrimers with fewer generations compared to the divergent approach. Despite this limitation, the convergent approach remains a valuable strategy for constructing dendrimers with controlled structures and desirable functionalities. It offers significant advantages in specific applications where meticulous control and minimized by-products stand as crucial considerations. Polymers 2023,15, 4369 5 of 23 4. Traditional Dendrimers Apart from the generation of the dendrimer, their most common classification is based on the chemical nature of their branches. Herein, we defined traditional dendrimers as symmetric macromolecules formed by a single type of flexible branches. Under this definition, the most common dendrimers applied nowadays are included, for which a brief summary of the main properties is included below. 4.1. PAMAM Dendrimers These are comprised of repeating units of methyl acrylate and ethylenediamine; therefore, they contain amine and amide groups in their interior. PAMAM was the first dendrimer synthesized and commercialized. These dendrimers usually feature terminal amino groups, which confer a cationic nature and remarkable hydrophilicity. Additionally, those groups can be straightforwardly functionalized to modulate their physicochemical properties [ 15 ]. PAMAM finds its primary utility within the realm of biomedical applications such as a gene delivery unit, an oral drug delivery vehicle, or even an activator of the immune system [ 16 ]. It is worth mentioning that the stability of PAMAM dendrimers is relatively lower in comparison with other dendrimers. This is attributed to their susceptibility to retro-Michael reactions when exposed to high temperatures, which imposes restrictions on their potential applications. Ref. [ 17 ] PAMAM synthesis consists of performing a Michael addition using a large excess of methyl acrylate, and subsequently, an amidation reaction with ethylenediamine. 4.2. PPI Dendrimers PPI dendrimers are a distinct class of dendrimers that consists of repeating propyleneimine units. Similar to PAMAM dendrimers, these dendrimers possess remarkable hydrophilicity with excellent water solubility due to their terminal cationic amino surface. However, their internal part is more hydrophobic than PAMAM as was shown by using the solvatochromic probe phenol blue [ 18 , 19 ]. This property of PPI dendrimers makes them highly desirable for the task of delivering drugs that have poor solubility in water [ 20 ]. Moreover, PPI dendrimers exhibit high stability and can be readily prepared with a high yield, making them commercially available. Their more efficient synthesis consists of using a Michael addition between the primary amines and acrylonitrile, and subsequently a heterogeneous hydrogenation with a Raney cobalt catalyst [21]. 4.3. PLL Dendrimers These are unique macromolecules that are constructed with repeating L-lysine units linked together using amide bonds. The presence of the asymmetric L-lysine amino acid imparts chirality on the dendrimer structure, resulting in an inherently chiral molecule. Furthermore, PLL dendrimers exhibit an asymmetrical branching pattern, where the branches possess different lengths, contributing to their complex three-dimensional architecture [ 22 ]. As in the case of PAMAM and PPI dendrimers, these dendrimers also possess amino groups as end-group functionalities, which can be utilized to enhance their solubility in aqueous as well as organic environments. Notably, an intriguing aspect of PLL dendrimers is their biodegradability, owing to their composition based on peptide bonds. This attribute renders them highly suitable for a wide range of biomedical applications, making them promising candidates in the field [ 23 ]. In fact, PLL dendrimers are currently applied in health products for the treatment and prevention of bacterial vaginosis and the prevention of sexually transmitted diseases [24]. 4.4. Polyester Dendrimers These are a unique class of dendrimers in which the components are linked using ester bonds. While various types of polyester dendrimers have been reported, those based on 2,2-bis(hydroxymethyl)propanoic acid (bis-MPA) are the most prevalent. One of the notable advantages of bis-MPA is its availability at a low cost, making it an economically Polymers 2023,15, 4369 6 of 23 viable option. Its preparation consists of an esterification in dichloromethane with the DCC coupling agent in the presence of the catalyst DPTS (Figure 3). Subsequently, the protection group was removed easily under mild conditions by stirring the acetonide derivatives in MeOH in the presence of the acidic resin Dowex 50W [ 25 ]. Nowadays, several companies offer dendrons and dendrimers of bis-MPA, providing accessible options for researchers interested in utilizing these structures. Typically, the end-group functionalities of these dendrimers consist of alcohol moieties, which offer the versatility to bind other functionalities, often via the formation of carbamates [ 26 ]. Moreover, the presence of these alcohol moieties not only imparts remarkable water solubility but also offers the advantage of reduced toxicity compared to the previous dendrimers due to their neutral charge. Importantly, MPA dendrimers exhibit superior biodegradability compared to PLL polymers, primarily due to the lower stability of ester bonds in comparison to amide bonds. For this reason, they are extensively applied in biological applications [27]. Figure 3. Synthesis of a G3 bis-MPA dendrimer. DCC is the coupling agent N,N 0 -dicyclohexylcarbodiimide and DPTS is the molecule 4-(dimethylamino)pyridinium 4toluenesulfonate that acts as the catalyst. 4.5. Polyether Dendrimers These are another type of dendrimer closely related to polyester dendrimers. The key distinction between these two families lies in their chemical bonds, as polyether dendrimers are bound using ester bonds. This difference in bonding gives polyether dendrimers a significant advantage in terms of stability compared to polyester dendrimers, particularly when it comes to chemical and biological degradation. Among the polyether dendrimers, poly(benzyl ether) dendrimers stand out as the most representative polyether dendrimer [ 28 ]. A key characteristic of this dendrimer is that their branch structure is quite hydrophobic [29]. 4.6. Organoelement Dendrimers Organoelement dendrimers refer to a class of dendritic macromolecules characterized by the incorporation of non-carbon elements, such as silicon [ 30 ], phosphorus [ 31 ], and boron [ 32 ], into their central core structure. Among organoelement dendrimers, those containing silicon, such as carbosilane and carbosiloxane dendrimers [ 30 , 33 ], are often highly representative. One key advantage of silicon-containing dendrimers is their ease of synthesis, coupled with their exceptional chemical structure, featuring robust Si–C bonds [ 34 ]. These Si–C bonds are not easily broken or affected by unwanted or side chemical reactions during their preparation, making their production simpler. Polymers 2023,15, 4369 7 of 23 4.7. Applications of Traditional Dendrimers Traditional dendrimers have found applications in a wide range of fields due to their unique properties and versatile structures [ 35 ]. However, a significant focus is placed on exploring their potential applications in the field of biomedicine, the main ones being the following: (i) MRI contrast agents : Since the sensitivity of magnetic resonance imaging (MRI) to tissue type differences is relatively low, paramagnetic metals are used as contrast agents. These agents are used to shorten the relaxation times of the surrounding water protons in order to improve contrast. To minimize the need for high doses of contrast agent, dendrimers have been decorated with coordinating groups to endow affinity for metals like gadolinium. This strategy allows us to increase the efficiency of the contrast agent and also modify its biodistribution [ 36 ]. Nonetheless, metals tend to exhibit toxicity; hence, researchers are currently investigating a prospective class of contrast agents. These agents rely on dendrimers adorned with functional organic radicals, showing promising potential as MRI contrast agents [37]. (ii) Tissue engineering : Since dendrimers can be modified to incorporate or encapsulate a variety of biological and/or chemical substances, they have been used in tissue engineering to design artificial extracellular matrices. For instance, dendrimers can be applied to encapsulate growth factors and release the components in the native extracellular matrix in a controlled manner to enable tissue regeneration. Another option is to use dendrimers to form hydrogels that mimic natural extracellular matrices to induce the growth of the seeded cells [38]. (iii) Gene delivery : Dendrimers can be applied as a non-viral gene delivery platform. In particular, PAMAM and lysine-based dendrimers have shown affinity for DNA molecules inducing the formation of dendriplexes (i.e., complex obtained after the electrostatic interaction between dendrimers and nucleic acids). These structures enhance the cellular uptake of DNA via various mechanisms, such as endocytosis. Additionally, after cellular uptake, the dendriplex facilitates the escape of cells, which are often trapped in endosomes, into the cytoplasm [39]. (iv) Drug delivery systems : Dendrimers for drug delivery can be used in two different ways: formulation where they are entrapped in a dendrimer using non-covalent interactions, and nanoconstruction where drugs are covalently coupled on dendrimers. Both strategies allow us to increase the solubility, stability, and oral bioavailability of various drugs [40]. 5. Janus Dendrimers Janus particles, named after the two-faced Roman god Janus, are used to describe a unique class of particles that have two distinct sides that can be anisotropic in their composition and surface features. Janus particles have received a considerable amount of interest recently as next-generation “smart” nanomaterials. They provide asymmetry and can thus impart drastically different chemical or physical properties and directionality within a single particle [ 41 ]. Broken symmetry offers an efficient and distinctive means to target complex self-assembled materials and realize the emergence of properties (presently) inconceivable for homogeneous particles. Regarding Janus dendrimers, there are two possible types of these dendrimers. The first and more common type is characterized by having different end-group functionalities and distinct branch structures in each part. The second type is characterized by having only different end-group functionalities while maintaining similar branch structures. The most common method to prepare both types of dendrimers involves the reaction of distinct dendrons possessing complementary functions [ 42 ]. This approach utilizes a convergent synthesis strategy, where the dendrons are individually synthesized and subsequently connected to each other using various reactions, such as “click chemistry”. Alternatively, another approach involves the utilization of multi-functional cores, which enable the Polymers 2023,15, 4369 8 of 23 execution of two distinct divergent syntheses to generate the two distinct parts of the Janus dendrimer [43,44]. One of the most interesting properties of Janus dendrimers are their self-assembly capabilities in water when they combine a hydrophilic and another hydrophobic part. Revolutionary research published in 2010 led by Virgil Percec showed that amphiphilic Janus dendrimers can self-assemble in water, forming stable bilayer vesicles referred to as dendrimersomes (Figure 4) [ 45 ]. In this work, the author synthesized a library of 107 amphiphilic Janus dendrimers by combining two hydrophobic segments (one aliphatic and one mixed aliphatic-aromatic) and six hydrophilic segments derived from oligoethylene oxide, dimethylolpropionic acid, glycerol, thioglycerol, tert-butylcarbamate, and quaternary ammonium salts. The self-assembly properties of these dendrimers were studied using cryo-TEM, which showed a rich palette of morphologies in water, including vesicles, cubosomes, disks, tubular vesicles, and helical ribbons. Importantly, dendrimersomes can also incorporate pore-forming proteins, coassemble with structure-directing phospholipids and block co-polymers, and offer a molecular periphery suitable for further chemical functionalization. Figure 4. ( a ) Schematic representation of the dendrimersomes based on ionizable amphiphilic Janus dendrimers (IAJD) developed by Percec’s group for the encapsulation of mRNA. ( b ) Chemical structure of a typical IAJD. Reprinted with permission from ref. [ 46 ]. Copyright 2021 American Chemical Society. For the synthesis of the former Janus dendrimers, V. Percec and coworkers developed a synthetic strategy known as the modular-orthogonal methodology [ 47 ]. This approach involves using a tetra-functional core, i.e., pentaerythritol, as a core molecule, in conjunction with orthogonal-protecting groups. The protecting groups enable the core to be differentially substituted, ultimately resulting in the formation of a type of Janus dendrimers called twin-twin dendrimers, which usually comprise two identical hydrophobic dendrons and two identical hydrophilic dendrons. Furthermore, this methodology was improved by incorporating tris(hydroxymethyl)aminomethane as the core molecule, enabling the synthesis of dendrimers with three distinct regions [ 46 ]. Termed hybrid twin-mix dendrimers, these structures consist of two identical hydrophobic dendrons and two different hydrophilic dendrons (Figure 4b). Percel’s group has successfully exploited these synthetic strategies to obtain a wide range of dendrimers, opening up possibilities for various applications. Some of the notable applications include: (i) RNA delivery: Efficient delivery of nucleic acids is the key step of genetic nanomedicine. Percec’s group applied the modular-orthogonal methodology to develop a library of 54 amphiphilic Janus dendrimers containing ionizable amines to perform mRNA delivery in vivo (Figure 4) [ 46 ]. These Janus dendrimers can encapsulate large quantities of mRNA at an acidic pH (pH 3 to 5), when the amino groups are protonated, due to the electrostatic interactions. In contrast to common lipid nanoparticles that require complex microfluidic technology to encapsulate RNA, these dendrimersomes perform the encapsulation via simple injection, and allow long-term storage. (ii) Killing of bacteria: Antibiotic resistance is a serious global health problem necessitating new bactericidal approaches such as nanomedicines. Molly M. Stevens’ group has taken advantage of the synthetic strategy developed by Percel’s group for the synthesis of Janus dendrimers to design a dendrimersome-based nanoreactor, with Polymers 2023,15, 4369 9 of 23 broad-spectrum bactericidal activity [ 48 ]. This nanoreactor consists of a dendrimersome with a semipermeable membrane where two enzymes, namely glucose oxidase (GOx) and myeloperoxidase (MPO), are encapsulated. Via external addition of glucose to this system, hypochlorite, which is a highly potent antimicrobial, is produced by the enzymatic cascade. This cascade nanoreactor yielded a potent bactericidal effect against two important multidrug resistant pathogens, Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa). (iii) Building mimics of cell membranes: The glycocalyx is the first component of the cell that interacts with the environment, enabling cell communication, cell adhesion, and so on. Importantly, the glycan moieties at the cellular membrane have specific spatial arrangements that can be exploited by some pathogenic bacteria and viruses to attack cells. Studying natural glycocalyx is important to develop synthetic models to dissect structure–function relations. To this end, a type of amphiphilic Janus dendrimers containing carbohydrates in the hydrophilic part has been developed, namely glycodendrimers [ 47 ]. The glycodendrimersomes derived from these dendrimers have been shown to mimic some of the supramolecular organization of natural membranes. For example, it was demonstrated that using glycodendrimersomes decorated with mannose, the sugar moieties were organized into periodic nanoarrays without the need for the formation of liquid-ordered phases as assumed necessary for rafts. A similar example was developed by the group of Guang Yang [ 49 ]. They designed a family of dynamic amphiphilic Janus glycopeptide dendrimers containing a β -cyclodextrin as the core and 14 saccharide dendrons as the hydrophilic part. Additionally, they also had seven peptide arms as the hydrophobic region, which were bonded to the core using acylhydrazone bonds. These dendrimers were self-assembled into different glyco-nanostructures with controllable morphologies including glycospheres, worm-like micelles, and fibers. Furthermore, disassembly could be induced using the addition of an acid that hydrolyzes acylhydrazone bonds; thus, they could be applied for the targeting and controllable release of encapsulated guest cargos. 6. Supramolecular Dendrimers Supramolecular dendrimers are a class of highly branched macromolecules formed via the self-assembly of repeating subunits, known as dendrons [ 50 ]. Unlike traditional dendrimers, which rely on covalent bonds, these are held together and stabilized using reversible non-covalent interactions, such as hydrogen bonding, electrostatic, π−π , or metal–ligand interactions [ 51 , 52 ]. The dynamic behavior of the physicochemical properties ascribed to non-covalent interactions can be reversible, enabling supramolecular dendrimers to exhibit responsiveness to various external stimuli, such as changes in pH, temperature, and/or the presence of specific molecules [ 53 ]. Some of the key properties and advantages of supramolecular dendrimers, in contrast to covalently bonded dendrimers, are as follows: easy modification due to the accessible functional groups on their periphery, and the reversibility and tunability of their dendrimer structure. While the formation of traditional dendrimers suffers from time-consuming procedures and low yields due to steric congestion, the self-assembly production of supramolecular dendrimers offers considerable advantages: simpler processes, fast and effective creation of the final product, and inherently defect-free assembly [ 54 ]. The synthesis of supramolecular dendrimers can be achieved using custom-designed strategies and modifications to tailor the dendritic structures and properties according to specific needs, as discussed previously. One of the most important synthetic steps resides with the selection of the appropriate building blocks, including a dendritic core, peripheral functional groups, and lastly a linker molecule, which will provide the complementary functionalities for self-assembly [ 54 ]. Supramolecular dendrimers can be classified based on the type of non-covalent interactions that occur between the dendrimer components into three main classes. Polymers 2023,15, 4369 16 of 23 Figure 10. Representation of type I-C rotaxane dendrimer synthesized using the slippage methodology. Reprinted with permission from ref. [86]. Copyright 2002 American Chemical Society. 8.2. Type II Rotaxane Dendrimers Type II dendrimers refer to dendrimers that possess a periphery adorned with rotaxane structures. However, in contrast to type I, these dendrimers are typically based on pseudorotaxanes instead of rotaxane. A pseudorotaxane is a type of rotaxane that lacks bulky groups at the ends; thereby, it can be dissociated into its two components without breaking the covalent bonds [ 87 ]. Like type I RDs, these dendrimers can also be categorized into subtypes A, B, and C, although type II-A is the most abundant class by far. The most typical examples of this type of pseudorotaxane-terminated dendrimer available in the literature exploit the host–guest interactions of cyclodextrins (CDs, Figure 11a) or cucurbiturils (CBs) [ 88 , 89 ]. Remarkably, the presence of CDs in the dendrimer branches enhances their solubility in water [90]. In recent years, several examples of type II-A have been reported that are based on rotaxanes instead of pseudorotaxanes. Other supramolecular hosts different from CB and CD units have been used. For instance, Qu et al. introduced a straightforward synthetic approach via the Co-catalyzed [2+2+2] alkyne cyclotrimerization process that allowed them to transform a [3]rotaxane (i.e., the number in brackets indicates the number of components of the rotaxane) based on a crown ether into a hexa-branched [7]rotaxane in a single step [ 92 ]. On the other hand, Goldup and colleagues took advantage of the Cu-mediated azide–alkyne cycloaddition (CuAAC) to synthesize interlocked triazole functionalized porphyrinoids with an excellent yield [93]. Polymers 2023,15, 4369 17 of 23 Figure 11. Representations of rotaxane dendrimers: ( a ) structure of a type II rotaxane dendrimer. Here, the dendrimer serves as a three-dimensional template to organize CD receptors in the periphery. ( b ) Type III rotaxane dendrimers for generation 2 (G2). Adapted from refs. [ 89 , 91 ]. Copyright 1997 American Chemical Society and 2018 Springer Nature. 8.3. Type III Rotaxane Dendrimers These are dendritic polyrotaxanes whose rotaxane units form part of the dendrimer branches and are also referred to as rotaxane-branched dendrimers. The first example of this type of dendrimer was reported by Stoddart et al. in 1995 [ 94 ]. They successfully synthesized a G1, type III-A dendrimer containing [4]rotaxane by means of a slippage procedure. In 2013, Leung et al. described the synthesis and characterization of type III-B rotaxane dendrimers, specifically a G1 [3]rotaxane dendrimer and a G2 [4]rotaxane dendrimer [95]. High-generation type III dendrimers stand out as one of the most interesting types of dendrimers within the domain of dendritic structures. Notably, the augmentation in dendrimer generation yields an exponential increase in the number of rotaxanes within this dendritic type. Consequently, harnessing the stimulus-responsive attributes of rotaxanes enables the conceptualization of sophisticated RDs that exhibit profound alterations in dimensions upon exposure to specific stimuli. For the preparation of these dendrimers, the Leung group published in 2018 the synthesis of a fully organic type of III-B RD of up to G4 generation via a convergent pathway using a CuAAC reaction (Figure 11b) [ 91 ]. On the other hand, the H. Yang group developed another strategy to synthesize G4 RDs based on platinum − acetylide moieties, where these moieties served as both bulky stoppers to prevent dethreading and a reactive site that could be used to grow the dendrimers. Using this synthetic approach, they prepared both G4 dendrimers of type III-A and type III-C [ 83 ]. 8.4. Applications of Rotaxane Dendrimers Rotaxane dendrimers find a wide array of applications, including but not limited to: (i) Molecular machines: Several of the previously mentioned RDs exhibit responsive behavior that can be regulated by external factors such as pH, redox conditions, light exposure, alterations in solvents, and the introduction of anions. This inherent stimulus responsiveness leads to modifications in their dimensions, arising from a coordinated expansion–contraction movement within the integrated rotaxane-branched dendritic structure. Importantly, these structures hold great promise for the development of functional units that enable controlled release of substances in drug delivery Polymers 2023,15, 4369 18 of 23 systems [ 96 ]. Beyond this application, the design of artificial muscles stands out as another exciting prospect, with the potential to transduce chemical energy into mechanical energy [ 87 ]. To optimize this distinctive size alteration phenomenon, it is imperative for the dendrimers to harbor the maximum possible count of rotaxanes. Consequently, the most promising contenders for the development of molecular machinery applications are the high-generation type III RDs [ 96 ]. This fact was clearly exemplified by a work published by Yang’s group. They described the synthesis of type III-C RDs, including G1, G2, G3, and G4, by employing the platinum–acetylide methodology as previously discussed. These synthesized dendrimers undergo an expansion–contraction dynamic in response to the presence or absence of acetate anions, resulting in a reversible modulation of their sizes within organic solvents. The assessment of these RDs’ swelling ratios using 2-D DOSY experiments revealed the following results: 22.9% for G1, 28.8% for G2, 34.7% for G3, and 38.3% for G4. This illustrated a clear progression as a function of the dendrimer generation [97]. (ii) Light harvesting: Photosensitizers play a significant role in light harvesting, which is the process of capturing and converting light energy into another form of energy, such as chemical energy or electrical energy. In this context, rotaxane dendrimers with applications as photosensitizers were designed. The non-covalent modification of dendrimer peripheries offers benefits such as reversibility, selectivity, and adjustability, useful to prevent unwanted interactions between peripheral chromophores, which would cause energy loss during the process [98,99]. 9. Conclusions and Future Perspectives Since the first example of a dendrimer was published in the 80s [ 1 ], the field of dendrimers has experienced significant advancements, leading to a wide array of available dendrimers today. For example, only considering the classical dendrimers, there is a remarkable diversity in terms of their stability and polarity. Equally, some exhibit exceptional stability, ensuring their longevity and resistance to degradation (e.g., PPI), while others are designed to be biodegradable, allowing for controlled breakdown over time (bis-MPA dendrimers) [27]. Beyond the classical dendrimers, the field has witnessed the emergence of exciting dendrimer architectures that greatly expand the potential applications and capabilities of these nanoscale structures. One remarkable breakthrough in recent years has been the synergistic interaction between molecular self-assembly and dendrimers. This interaction has paved the way for the development of novel types of dendrimers with unprecedented properties. For instance, supramolecular dendrimers have been designed, leveraging the self-assembly of molecular components to form intricate and highly organized structures [ 54 ]. Another remarkable advancement is the development of rotaxane-branched dendrimers, which combine the controlled branching of traditional dendrimers with the mechanically interlocked architecture of rotaxanes [ 96 ]. Moreover, this synergy has also led to the design of novel self-assembled systems where dendrimers are used as buildingblocks, e.g., dendrimersomes [ 45 ]. These structures mimic natural cell membranes and hold great potential for applications in drug delivery, nanoreactors, and biomaterials. Certainly, the combination of molecular self-assembly and dendrimers holds tremendous promise for the creation of highly functional materials in the near future. However, despite the tremendous advance in the dendrimer field, there are still two challenges that limit the application of these materials. (i) Synthetic limitations : The synthetic methodology for traditional dendrimers has undergone significant advancements. For instance, a recent synthetic protocol enables the rapid preparation of G5 dendrimers within a span of less than 12 h [ 100 ]. However, a notable challenge remains in achieving high yields and monodispersity in the synthesis of high-generation dendrimers. Divergent synthesis yields high-generation dendrimers with increased yields but compromised branching accuracy. Conversely, the convergent synthesis approach generates monodisperse materials; however, it Polymers 2023,15, 4369 19 of 23 suffers from diminished yields, and is inadequate for producing high-generation dendrimers due to the steric hindrance between the dendrons. Presently, the most favorable strategies for synthesizing high-generation dendrimers predominantly rely on click chemistry reactions, particularly alkyne–azide cycloaddition, chosen for its notable efficiency [ 101 ]. Furthermore, various research groups have endeavored to address the aforementioned challenges by employing solid-phase synthesis as a method for dendrimer preparation. It is important to note that, despite these efforts, this technology is still limited to low-generation dendrimers at the milligram or gram scales [102]. (ii) Preparation of multifunctional dendrimers : As was stated in the introduction, dendrimers and proteins share several properties in common. However, a crucial distinction emerges in that while proteins exhibit remarkable asymmetry and highly precise arrangements of functionalities, dendrimers are characterized by remarkable symmetry, often showcasing a singular type of functionality. Although efforts have been made to design multifunctional dendrimers, these materials currently exhibit a random distribution of such functionalities [ 103 ]. Undoubtedly, the synthesis of dendrimers incorporating multifunctional arrangements on their surfaces is poised to inaugurate a new realm of highly functional synthetic materials. A noteworthy development in the realm of dendrimers is the emergence of tectodendrimers, often referred to as megamers [ 104 ]. Tecto-dendrimers represent a novel approach, where dendrimers serve as reactive modules for constructing nanoarchitectures of greater complexity and larger dimensions. One prominent architectural configuration achieved using this approach involves the assembly of shell-like structures composed of two distinct dendrimer types. To date, these architectures have been mainly applied as contrast agents for the magnetic resonance imaging of tumors [ 105 , 106 ], and as gene delivery platforms [107]. This innovative fusion of advanced synthetic techniques, enabling the creation of multifunctional dendrimers with the concept of tecto-dendrimers, holds immense promise for the future. It opens the door to the development of intricate hierarchical structures with the potential to perform sophisticated functions, perhaps even mirroring biological systems. Author Contributions: Conceptualization, I.J.G. and J.M.; writing—original draft preparation, M.P.-F. , A.M.A., I.J.G. and J.M.; writing—review and editing, A.C., I.J.G. and J.M.; supervision, A.C., I.J.G. and J.M.; funding acquisition, A.C. and J.M. All authors have read and agreed to the published version of the manuscript. Funding: J.M. acknowledges Xunta de Galicia for its research grant Proxectos de Excelencia (No. ED431F 2022/02) and RYC2019-027842-I from MCIN/AEI/ 10.13039/501100011033 and “ESF: Investing in Your Future”. I.J.G. acknowledges the Spanish Ministry of Universities for a Beatriz Galindo (BG22/000147) and Maria Zambrano grant (RSU.UDC.MZ09) transferred by the European Union’s Next GenerationEU. A.C. acknowledges financial support from grants RYC2020-030183-I and PID2021-127002NA-I00, funded by MCIN/AEI/ 10.13039/501100011033 and “ESF: Investing in Your Future”. Institutional Review Board Statement: Not applicable. Informed Consent Statement: Not applicable. Data Availability Statement: Not applicable. Conflicts of Interest: The authors declare no conflict of interest. References 1. Tomalia, D.A.; Baker, H.; Dewald, J.; Hall, M.; Kallos, G.; Martin, S.; Roeck, J.; Ryder, J.; Smith, P. A New Class of Polymers: Starburst-Dendritic Macromolecules. Polym. J. 1985,17, 117–132. [CrossRef] 2. Pedziwiatr-Werbicka, E.; Milowska, K.; Dzmitruk, V.; Ionov, M.; Shcharbin, D.; Bryszewska, M. Dendrimers and Hyperbranched Structures for Biomedical Applications. Eur. Polym. J. 2019,119, 61–73. [CrossRef] Polymers 2023,15, 4369 20 of 23 3. Nikzamir, M.; Hanifehpour, Y.; Akbarzadeh, A.; Panahi, Y. Applications of Dendrimers in Nanomedicine and Drug Delivery: A Review. J. Inorg. Organomet. Polym. 2021,31, 2246–2261. [CrossRef] 4. Najafi, F.; Salami-Kalajahi, M.; Roghani-Mamaqani, H. A Review on Synthesis and Applications of Dendrimers. J. Iran. Chem. Soc. 2021,18, 503–517. [CrossRef] 5. Dias, A.P.; da Silva Santos, S.; da Silva, J.V.; Parise-Filho, R.; Igne Ferreira, E.; Seoud, O.E.; Giarolla, J. Dendrimers in the Context of Nanomedicine. Int. J. Pharm. 2020,573, 118814. [CrossRef] 6. Huang, C.-Y.; Su, Y.O. Spectral and Redox Properties of Zinc Porphyrin Core Dendrimers with Triarylamines as Dendron. Dalton Trans. 2010,39, 8306–8312. [CrossRef] 7. Tsukamoto, T.; Imaoka, T.; Yamamoto, K. Unique Functions and Applications of Rigid Dendrimers Featuring Radial Aromatic Chains. Acc. Chem. Res. 2021,54, 4486–4497. [CrossRef] 8. Patel, P.; Patel, V.; Patel, P.M. Synthetic Strategy of Dendrimers: A Review. J. Indian Chem. Soc. 2022,99, 100514. [CrossRef] 9. Hu, J.; Hu, K.; Cheng, Y. Tailoring the Dendrimer Core for Efficient Gene Delivery. Acta Biomater. 2016 ,35, 1–11. [CrossRef] [PubMed] 10. Mekelburger, H.-B.; Vögtle, F.; Jaworek, W. Dendrimers, Arborols, and Cascade Molecules: Breakthrough into Generations of New Materials. Angew. Chem. Int. Ed. Engl. 1992,31, 1571–1576. [CrossRef] 11. Sapra, R.; Verma, R.P.; Maurya, G.P.; Dhawan, S.; Babu, J.; Haridas, V. Designer Peptide and Protein Dendrimers: A Cross-Sectional Analysis. Chem. Rev. 2019,119, 11391–11441. [CrossRef] [PubMed] 12. Walter, M.V.; Malkoch, M. Simplifying the Synthesis of Dendrimers: Accelerated Approaches. Chem. Soc. Rev. 2012 ,41, 4593–4609. [CrossRef] [PubMed] 13. Hawker, C.; Fréchet, J.M.J. A New Convergent Approach to Monodisperse Dendritic Macromolecules. J. Chem. Soc. Chem. Commun. 1990,101, 1010–1013. [CrossRef] 14. Grayson, S.M.; Fréchet, J.M.J. Convergent Dendrons and Dendrimers: From Synthesis to Applications. Chem. Rev. 2001 ,101, 3819–3868. [CrossRef] [PubMed] 15. Kharwade, R.; More, S.; Warokar, A.; Agrawal, P.; Mahajan, N. Starburst Pamam Dendrimers: Synthetic Approaches, Surface Modifications, and Biomedical Applications. Arab. J. Chem. 2020,13, 6009–6039. [CrossRef] 16. Araújo, R.V.d.; Santos, S.d.S.; Igne Ferreira, E.; Giarolla, J. New Advances in General Biomedical Applications of PAMAM Dendrimers. Molecules 2018,23, 2849. [CrossRef] 17. Lyu, Z.; Ding, L.; Huang, A.Y.-T.; Kao, C.-L.; Peng, L. Poly(Amidoamine) Dendrimers: Covalent and Supramolecular Synthesis. Mater. Today Chem. 2019,13, 34–48. [CrossRef] 18. Richter-Egger, D.L.; Tesfai, A.; Tucker, S.A. Spectroscopic Investigations of Poly(Propyleneimine)Dendrimers Using the Solvatochromic Probe Phenol Blue and Comparisons to Poly(Amidoamine) Dendrimers. Anal. Chem. 2001 ,73, 5743–5751. [CrossRef] [PubMed] 19. Scherrenberg, R.; Coussens, B.; van Vliet, P.; Edouard, G.; Brackman, J.; de Brabander, E.; Mortensen, K. The Molecular Characteristics of Poly(Propyleneimine) Dendrimers As Studied with Small-Angle Neutron Scattering, Viscosimetry, and Molecular Dynamics. Macromolecules 1998,31, 456–461. [CrossRef] 20. Jain, V.; Maingi, V.; Maiti, P.K.; Bharatam, P.V. Molecular Dynamics Simulations of PPI Dendrimer–Drug Complexes. Soft Matter 2013,9, 6482–6496. [CrossRef] 21. de Brabander-van den Berg, E.M.M.; Meijer, E.W. Poly(Propylene Imine) Dendrimers: Large-Scale Synthesis by Hetereogeneously Catalyzed Hydrogenations. Angew. Chem. Int. Ed. Engl. 1993,32, 1308–1311. [CrossRef] 22. Chen, S.; Huang, S.; Li, Y.; Zhou, C. Recent Advances in Epsilon-Poly-L-Lysine and L-Lysine-Based Dendrimer Synthesis, Modification, and Biomedical Applications. Front. Chem. 2021,9, 659304. [CrossRef] 23. Boyd, B.J.; Kaminskas, L.M.; Karellas, P.; Krippner, G.; Lessene, R.; Porter, C.J.H. Cationic Poly-l-Lysine Dendrimers: Pharmacokinetics, Biodistribution, and Evidence for Metabolism and Bioresorption after Intravenous Administration to Rats. Mol. Pharm. 2006,3, 614–627. [CrossRef] [PubMed] 24. Granier, F.; Marie, S.; Al Amir Dache, Z.; Aityaya, J.; Mazard, T.; Garrelly, L.; Prévostel, C. Assessment of Dendrigrafts of Poly-l-Lysine Cytotoxicity and Cell Penetration in Cancer Cells. ACS Appl. Polym. Mater. 2022,4, 908–919. [CrossRef] 25. Ropponen, J.; Tuuttila, T.; Lahtinen, M.; Nummelin, S.; Rissanen, K. Thermal and X-Ray Powder Diffraction Studies of Aliphatic Polyester Dendrimers. J. Polym. Sci. Part A Polym. Chem. 2004,42, 5574–5586. [CrossRef] 26. Carlmark, A.; Malmström, E.; Malkoch, M. Dendritic Architectures Based on Bis-MPA: Functional Polymeric Scaffolds for Application-Driven Research. Chem. Soc. Rev. 2013,42, 5858–5879. [CrossRef] 27. Gonçalves, M.; Kairys, V.; Rodrigues, J.; Tomás, H. Polyester Dendrimers Based on Bis-MPA for Doxorubicin Delivery. Biomacromolecules 2022,23, 20–33. [CrossRef] 28. Hawker, C.J.; Frechet, J.M.J. Preparation of Polymers with Controlled Molecular Architecture. A New Convergent Approach to Dendritic Macromolecules. J. Am. Chem. Soc. 1990,112, 7638–7647. [CrossRef] 29. Feng, Y.; Liu, Z.-X.; Chen, H.; Fan, Q.-H. Functional Supramolecular Gels Based on Poly(Benzyl Ether) Dendrons and Dendrimers. Chem. Commun. 2022,58, 8736–8753. [CrossRef] [PubMed] 30. van der Made, A.W.; van Leeuwen, P.W.N.M. Silane Dendrimers. J. Chem. Soc. Chem. Commun. 1992,24, 1400–1401. [CrossRef] 31. Caminade, A.-M.; Maraval, V.; Laurent, R.; Turrin, C.-O.; Sutra, P.; Leclaire, J.; Griffe, L.; Marchand, P.; Baudoin-Dehoux, C.; Rebout, C.; et al. Phosphorus Dendrimers: From Synthesis to Applications. Comptes Rendus Chim. 2003,6, 791–801. [CrossRef] Polymers 2023,15, 4369 21 of 23 32. Minyaylo, E.O.; Anisimov, A.A.; Zaitsev, A.V.; Milenin, S.A.; Tikhonov, P.A.; Vyshivannaya, O.V.; Ol’shevskaya, V.A.; Nikiforova, G.G.; Buzin, M.I.; Peregudov, A.S.; et al. Boron-Substituted Carborane-Carbosilane Dendrimers: Synthesis and Properties. React. Funct. Polym. 2020,157, 104746. [CrossRef] 33. González-Campo, A.; Viñas, C.; Teixidor, F.; Núñez, R.; Sillanpää, R.; Kivekäs, R. Modular Construction of Neutral and Anionic Carboranyl-Containing Carbosilane-Based Dendrimers. Macromolecules 2007,40, 5644–5652. [CrossRef] 34. Ryzhkov, A.I.; Drozdov, F.V.; Cherkaev, G.V.; Muzafarov, A.M. Approaches to the Functionalization of Organosilicon Dendrones Based on Limonene. Appl. Sci. 2023,13, 2121. [CrossRef] 35. Scott, R.W.J.; Wilson, O.M.; Crooks, R.M. Synthesis, Characterization, and Applications of Dendrimer-Encapsulated Nanoparticles. J. Phys. Chem. B 2005,109, 692–704. [CrossRef] [PubMed] 36. Longmire, M.; Choyke, P.L.; Kobayashi, H. Dendrimer-Based Contrast Agents for Molecular Imaging. Curr. Top. Med. Chem. 2008 , 8, 1180–1186. [CrossRef] [PubMed] 37. Zhang, S.; Lloveras, V.; Lope-Piedrafita, S.; Calero-Pérez, P.; Wu, S.; Candiota, A.P.; Vidal-Gancedo, J. Metal-Free Radical Dendrimers as MRI Contrast Agents for Glioblastoma Diagnosis: Ex Vivo and In Vivo Approaches. Biomacromolecules 2022 ,23, 2767–2777. [CrossRef] [PubMed] 38. Gorain, B.; Tekade, M.; Kesharwani, P.; Iyer, A.K.; Kalia, K.; Tekade, R.K. The Use of Nanoscaffolds and Dendrimers in Tissue Engineering. Drug Discov. Today 2017,22, 652–664. [CrossRef] [PubMed] 39. Yang, J.; Zhang, Q.; Chang, H.; Cheng, Y. Surface-Engineered Dendrimers in Gene Delivery. Chem. Rev. 2015 ,115, 5274–5300. [CrossRef] [PubMed] 40. Chauhan, A.S. Dendrimers for Drug Delivery. Molecules 2018,23, 938. [CrossRef] [PubMed] 41. Walther, A.; Müller, A.H.E. Janus Particles: Synthesis, Self-Assembly, Physical Properties, and Applications. Chem. Rev. 2013 ,113, 5194–5261. [CrossRef] [PubMed] 42. Ornelas, C.; Pennell, R.; Liebes, L.F.; Weck, M. Construction of a Well-Defined Multifunctional Dendrimer for Theranostics. Org. Lett. 2011,13, 976–979. [CrossRef] [PubMed] 43. Căta, A.; Iena s , cu, I.M.C.; ¸Stefănu t , , M.N.; Ro s , u, D.; Pop, O.-R. Properties and Bioapplications of Amphiphilic Janus Dendrimers: A Review. Pharmaceutics 2023,15, 589. [CrossRef] [PubMed] 44. Caminade, A.-M.; Laurent, R.; Delavaux-Nicot, B.; Majoral, J.-P. “Janus” Dendrimers: Syntheses and Properties. New J. Chem. 2012,36, 217–226. [CrossRef] 45. Percec, V.; Wilson, D.A.; Leowanawat, P.; Wilson, C.J.; Hughes, A.D.; Kaucher, M.S.; Hammer, D.A.; Levine, D.H.; Kim, A.J.; Bates, F.S.; et al. Self-Assembly of Janus Dendrimers into Uniform Dendrimersomes and Other Complex Architectures. Science 2010 , 328, 1009–1014. [CrossRef] 46. Zhang, D.; Atochina-Vasserman, E.N.; Maurya, D.S.; Huang, N.; Xiao, Q.; Ona, N.; Liu, M.; Shahnawaz, H.; Ni, H.; Kim, K.; et al. One-Component Multifunctional Sequence-Defined Ionizable Amphiphilic Janus Dendrimer Delivery Systems for mRNA. J. Am. Chem. Soc. 2021,143, 12315–12327. [CrossRef] 47. Percec, V.; Leowanawat, P.; Sun, H.-J.; Kulikov, O.; Nusbaum, C.D.; Tran, T.M.; Bertin, A.; Wilson, D.A.; Peterca, M.; Zhang, S.; et al. Modular Synthesis of Amphiphilic Janus Glycodendrimers and Their Self-Assembly into Glycodendrimersomes and Other Complex Architectures with Bioactivity to Biomedically Relevant Lectins. J. Am. Chem. Soc. 2013,135, 9055–9077. [CrossRef] 48. Potter, M.; Najer, A.; Klöckner, A.; Zhang, S.; Holme, M.N.; Nele, V.; Che, J.; Massi, L.; Penders, J.; Saunders, C.; et al. Controlled Dendrimersome Nanoreactor System for Localized Hypochlorite-Induced Killing of Bacteria. ACS Nano 2020 ,14, 17333–17353. [CrossRef] 49. Bi, F.; Zhang, J.; Wei, Z.; Yu, D.; Zheng, S.; Wang, J.; Li, H.; Hua, Z.; Zhang, H.; Yang, G. Dynamic Glycopeptide Dendrimers: Synthesis and Their Controllable Self-Assembly into Varied Glyco-Nanostructures for the Biomimicry of Glycans. Biomacromolecules 2022,23, 128–139. [CrossRef] 50. Zimmerman, S.C.; Zeng, F.; Reichert, D.E.C.; Kolotuchin, S.V. Self-Assembling Dendrimers. Science 1996 ,271, 1095–1098. [CrossRef] 51. Fréchet, J.M.J. Dendrimers and Supramolecular Chemistry. Proc. Natl. Acad. Sci. USA 2002 ,99, 4782–4787. [CrossRef] [PubMed] 52. Rosen, B.M.; Wilson, C.J.; Wilson, D.A.; Peterca, M.; Imam, M.R.; Percec, V. Dendron-Mediated Self-Assembly, Disassembly, and Self-Organization of Complex Systems. Chem. Rev. 2009,109, 6275–6540. [CrossRef] 53. Percec, V.; Sahoo, D.; Adamson, J. Stimuli-Responsive Principles of Supramolecular Organizations Emerging from Self-Assembling and Self-Organizable Dendrons, Dendrimers, and Dendronized Polymers. Polymers 2023,15, 1832. [CrossRef] [PubMed] 54. Dong, R.; Zhou, Y.; Zhu, X. Supramolecular Dendritic Polymers: From Synthesis to Applications. Acc. Chem. Res. 2014 ,47, 2006–2016. [CrossRef] [PubMed] 55. Hermans, T.M.; Broeren, M.A.C.; Gomopoulos, N.; Smeijers, A.F.; Mezari, B.; Van Leeuwen, E.N.M.; Vos, M.R.J.; Magusin, P.C.M.M.; Hilbers, P.A.J.; Van Genderen, M.H.P.; et al. Stepwise Noncovalent Synthesis Leading to Dendrimer-Based Assemblies in Water. J. Am. Chem. Soc. 2007,129, 15631–15638. [CrossRef] [PubMed] 56. Ma, Y.; Kolotuchin, S.V.; Zimmerman, S.C. Supramolecular Polymer Chemistry: Self-Assembling Dendrimers Using the DDA·AAD (GC-like) Hydrogen Bonding Motif. J. Am. Chem. Soc. 2002,124, 13757–13769. [CrossRef] [PubMed] 57. Franz, A.; Bauer, W.; Hirsch, A. Complete Self-Assembly of Discrete Supramolecular Dendrimers. Angew. Chem. Int. Ed. 2005 ,44, 1564–1567. [CrossRef] [PubMed] Polymers 2023,15, 4369 22 of 23 58. Dirksen, A.; Hahn, U.; Schwanke, F.; Nieger, M.; Reek, J.N.H.; Vögtle, F.; De Cola, L. Multiple Recognition of Barbiturate Guests by “Hamilton-Receptor”-Functionalized Dendrimers. Chem. Eur. J. 2004,10, 2036–2047. [CrossRef] 59. Fernández, G.; Pérez, E.M.; Sánchez, L.; Martín, N. An Electroactive Dynamically Polydisperse Supramolecular Dendrimer. J. Am. Chem. Soc. 2008,130, 2410–2411. [CrossRef] 60. Xu, L.; Chen, L.-J.; Yang, H.-B. Recent Progress in the Construction of Cavity-Cored Supramolecular Metallodendrimers via Coordination-Driven Self-Assembly. Chem. Commun. 2014,50, 5156–5170. [CrossRef] 61. Denti, G.; Campagna, S.; Serroni, S.; Ciano, M.; Balzani, V. Decanuclear Homoand Heterometallic Polypyridine Complexes: Syntheses, Absorption Spectra, Luminescence, Electrochemical Oxidation, and Intercomponent Energy Transfer. J. Am. Chem. Soc. 1992,114, 2944–2950. [CrossRef] 62. Astruc, D. From Sandwich Complexes to Dendrimers: Journey toward Applications to Sensing, Molecular Electronics, Materials Science, and Biomedicine. Chem. Commun. 2023,59, 7321–7345. [CrossRef] [PubMed] 63. Lyu, Z.; Ding, L.; Tintaru, A.; Peng, L. Self-Assembling Supramolecular Dendrimers for Biomedical Applications: Lessons Learned from Poly(Amidoamine) Dendrimers. Acc. Chem. Res. 2020,53, 2936–2949. [CrossRef] [PubMed] 64. Ding, L.; Lyu, Z.; Louis, B.; Tintaru, A.; Laurini, E.; Marson, D.; Zhang, M.; Shao, W.; Jiang, Y.; Bouhlel, A.; et al. Surface Charge of Supramolecular Nanosystems for In Vivo Biodistribution: A MicroSPECT/CT Imaging Study. Small 2020 ,16, 2003290. [CrossRef] 65. Gillies, E.R.; Jonsson, T.B.; Fréchet, J.M.J. Stimuli-Responsive Supramolecular Assemblies of Linear-Dendritic Copolymers. J. Am. Chem. Soc. 2004,126, 11936–11943. [CrossRef] 66. Zeng, Z.; Qi, D.; Yang, L.; Liu, J.; Tang, Y.; Chen, H.; Feng, X. Stimuli-Responsive Self-Assembled Dendrimers for Oral Protein Delivery. J. Control. Release 2019,315, 206–213. [CrossRef] 67. Dhumal, D.; Lan, W.; Ding, L.; Jiang, Y.; Lyu, Z.; Laurini, E.; Marson, D.; Tintaru, A.; Dusetti, N.; Giorgio, S.; et al. An Ionizable Supramolecular Dendrimer Nanosystem for Effective siRNA Delivery with a Favorable Safety Profile. Nano Res. 2021 ,14, 2247–2254. [CrossRef] 68. Lu, Y.-C.; Anedda, R.; Lai, L.-L. Shape-Persistent Dendrimers. Molecules 2023,28, 5546. [CrossRef] [PubMed] 69. Hammer, B.A.G.; Moritz, R.; Stangenberg, R.; Baumgarten, M.; Müllen, K. The Polar Side of Polyphenylene Dendrimers. Chem. Soc. Rev. 2015,44, 4072–4090. [CrossRef] 70. Finke, A.D.; Moore, J.S. Iterative Synthesis of 1,3,5-Polyphenylene Dendrons via C − H Activation. Org. Lett. 2008 ,10, 4851–4854. [CrossRef] 71. Morgenroth, F.; Reuther, E.; Müllen, K. Polyphenylene Dendrimers: From Three-Dimensional to Two-Dimensional Structures. Angew. Chem. Int. Ed. Engl. 1997,36, 631–634. [CrossRef] 72. Hammer, B.A.G.; Müllen, K. Expanding the Limits of Synthetic Macromolecular Chemistry through Polyphenylene Dendrimers. J. Nanopart. Res. 2018,20, 262. [CrossRef] [PubMed] 73. Higuchi, M.; Shiki, S.; Yamamoto, K. Novel Phenylazomethine Dendrimers: Synthesis and Structural Properties. Org. Lett. 2000 , 2, 3079–3082. [CrossRef] [PubMed] 74. Xu, Z.; Moore, J.S. Synthesis and Characterization of a High Molecular Weight Stiff Dendrimer. Angew. Chem. Int. Ed. Engl. 1993 , 32, 246–248. [CrossRef] 75. Moore, J.S. Shape-Persistent Molecular Architectures of Nanoscale Dimension. Acc. Chem. Res. 1997,30, 402–413. [CrossRef] 76. Türp, D.; Nguyen, T.-T.-T.; Baumgarten, M.; Müllen, K. Uniquely Versatile: Nano-Site Defined Materials Based on Polyphenylene Dendrimers. New J. Chem. 2012,36, 282–298. [CrossRef] 77. Yin, M.; Ding, K.; Gropeanu, R.A.; Shen, J.; Berger, R.; Weil, T.; Müllen, K. Dendritic Star Polymers for Efficient DNA Binding and Stimulus-Dependent DNA Release. Biomacromolecules 2008,9, 3231–3238. [CrossRef] 78. Lubczyk, D.; Siering, C.; Lörgen, J.; Shifrina, Z.B.; Müllen, K.; Waldvogel, S.R. Simple and Sensitive Online Detection of Triacetone Triperoxide Explosive. Sens. Actuators B Chem. 2010,143, 561–566. [CrossRef] 79. Mosquera, J.; Ronson, T.K.; Nitschke, J.R. Subcomponent Flexibility Enables Conversion between D4-Symmetric CdII8L8 and T-Symmetric CdII4L4 Assemblies. J. Am. Chem. Soc. 2016,138, 1812–1815. [CrossRef] 80. Sonobe, K.; Tanabe, M.; Yamamoto, K. Enhanced Catalytic Performance of Subnano Copper Oxide Particles. ACS Nano 2020 ,14, 1804–1810. [CrossRef] 81. Lee, J.W.; Kim, K. Rotaxane Dendrimers. In Dendrimers V: Functional and Hyperbranched Building Blocks, Photophysical Properties, Applications in Materials and Life Sciences; Schalley, C.A., Vögtle, F., Eds.; Topics in Current Chemistry; Springer: Berlin/Heidelberg, Germany, 2003; pp. 111–140. ISBN 978-3-540-36518-1. 82. Bruns, C.J.; Stoddart, J.F. The Nature of the Mechanical Bond: From Molecules to Machines; Wiley: Hoboken, NJ, USA, 2016. Available online: https://www.wiley.com/en-us/The+Nature+of+the+Mechanical+Bond%3A+From+Molecules+to+Machines-p-9781 119044000 (accessed on 21 August 2023). 83. Wang, X.-Q.; Li, W.-J.; Wang, W.; Yang, H.-B. Rotaxane Dendrimers: Alliance between Giants. Acc. Chem. Res. 2021 ,54, 4091–4106. [CrossRef] [PubMed] 84. Amabilino, D.B.; Ashton, P.R.; Balzani, V.; Brown, C.L.; Credi, A.; Fréchet, J.M.J.; Leon, J.W.; Raymo, F.M.; Spencer, N.; Stoddart, J.F.; et al. Self-Assembly of [n]Rotaxanes Bearing Dendritic Stoppers. J. Am. Chem. Soc. 1996,118, 12012–12020. [CrossRef] 85. Elizarov, A.M.; Chiu, S.-H.; Glink, P.T.; Stoddart, J.F. Dendrimer with Rotaxane-Like Mechanical Branching. Org. Lett. 2002 ,4, 679–682. [CrossRef] [PubMed] Polymers 2023,15, 4369 23 of 23 86. Elizarov, A.M.; Chang, T.; Chiu, S.-H.; Stoddart, J.F. Self-Assembly of Dendrimers by Slippage. Org. Lett. 2002 ,4, 3565–3568. [CrossRef] [PubMed] 87. Xue, M.; Yang, Y.; Chi, X.; Yan, X.; Huang, F. Development of Pseudorotaxanes and Rotaxanes: From Synthesis to StimuliResponsive Motions to Applications. Chem. Rev. 2015,115, 7398–7501. [CrossRef] 88. Lee, J.W.; Ko, Y.H.; Park, S.-H.; Yamaguchi, K.; Kim, K. Novel Pseudorotaxane-Terminated Dendrimers: Supramolecular Modification of Dendrimer Periphery. Angew. Chem. Int. Ed. 2001,40, 746–749. [CrossRef] 89. Castro, R.; Cuadrado, I.; Alonso, B.; Casado, C.M.; Morán, M.; Kaifer, A.E. Multisite Inclusion Complexation of Redox Active Dendrimer Guests. J. Am. Chem. Soc. 1997,119, 5760–5761. [CrossRef] 90. van Bommel, K.J.C.; Metselaar, G.A.; Verboom, W.; Reinhoudt, D.N. Water-Soluble Adamantane-Terminated Dendrimers Possessing a Rhenium Core. J. Org. Chem. 2001,66, 5405–5412. [CrossRef] 91. Kwan, C.-S.; Zhao, R.; Van Hove, M.A.; Cai, Z.; Leung, K.C.-F. Higher-Generation Type III-B Rotaxane Dendrimers with Controlling Particle Size in Three-Dimensional Molecular Switching. Nat. Commun. 2018,9, 497. [CrossRef] [PubMed] 92. Mao, M.; Zhang, X.-K.; Xu, T.-Y.; Wang, X.-D.; Rao, S.-J.; Liu, Y.; Qu, D.-H.; Tian, H. Towards a Hexa-Branched [7]Rotaxane from a [3]Rotaxane via a [2 + 2 + 2] Alkyne Cyclotrimerization Process. Chem. Commun. 2019,55, 3525–3528. [CrossRef] 93. Ngo, T.H.; Labuta, J.; Lim, G.N.; Webre, W.A.; D’Souza, F.; Karr, P.A.; Lewis, J.E.M.; Hill, J.P.; Ariga, K.; Goldup, S.M. Porphyrinoid Rotaxanes: Building a Mechanical Picket Fence. Chem. Sci. 2017,8, 6679–6685. [CrossRef] [PubMed] 94. Amabilino, D.B.; Ashton, P.R.; Bˇelohradský, M.; Raymo, F.M.; Stoddart, J.F. The Self-Assembly of Branched [n]Rotaxanes—The First Step towards Dendritic Rotaxanes. J. Chem. Soc. Chem. Commun. 1995,7, 751–753. [CrossRef] 95. Ho, K.-W.W.; Lee, S.-F.; Wong, C.-H.; Zhu, X.-M.; Kwan, C.-S.; Chak, C.-P.; Mendes, P.M.; Cheng, C.H.K.; Leung, K.C.-F. Type III-B Rotaxane Dendrimers. Chem. Commun. 2013,49, 10781–10783. [CrossRef] [PubMed] 96. Kwan, C.-S.; Leung, K.C.-F. Development and Advancement of Rotaxane Dendrimers as Switchable Macromolecular Machines. Mater. Chem. Front. 2020,4, 2825–2844. [CrossRef] 97. Wang, X.-Q.; Li, W.-J.; Wang, W.; Wen, J.; Zhang, Y.; Tan, H.; Yang, H.-B. Construction of Type III-C Rotaxane-Branched Dendrimers and Their Anion-Induced Dimension Modulation Feature. J. Am. Chem. Soc. 2019,141, 13923–13930. [CrossRef] 98. Zeng, Y.; Li, Y.; Li, M.; Yang, G.; Li, Y. Enhancement of Energy Utilization in Light-Harvesting Dendrimers by the Pseudorotaxane Formation at Periphery. J. Am. Chem. Soc. 2009,131, 9100–9106. [CrossRef] 99. Li, W.-J.; Hu, Z.; Xu, L.; Wang, X.-Q.; Wang, W.; Yin, G.-Q.; Zhang, D.-Y.; Sun, Z.; Li, X.; Sun, H.; et al. Rotaxane-Branched Dendrimers with Enhanced Photosensitization. J. Am. Chem. Soc. 2020,142, 16748–16756. [CrossRef] 100. Amaral, S.P.; Correa, J.; Fernandez-Megia, E. Accelerated Synthesis of Dendrimers by Thermal Azide–Alkyne Cycloaddition with Internal Alkynes. Green. Chem. 2022,24, 4897–4901. [CrossRef] 101. McNelles, S.A.; Adronov, A. Rapid Synthesis of Functionalized High-Generation Polyester Dendrimers via Strain-Promoted Alkyne–Azide Cycloaddition. Macromolecules 2017,50, 7993–8001. [CrossRef] 102. Ya-Ting Huang, A.; Kao, C.-L.; Selvaraj, A.; Peng, L. Solid-Phase Dendrimer Synthesis: A Promising Approach to Transform Dendrimer Construction. Mater. Today Chem. 2023,27, 101285. [CrossRef] 103. Uvyn, A.; Vleugels, M.; de Waal, B.; Hamouda, A.E.I.; Dhiman, S.; Louage, B.; Albertazzi, L.; Laoui, D.; Meijer, E.w.; De Geest, B.G. Hapten/Myristoyl Functionalized Poly(Propylene IMINE) Dendrimers as Potent Cell Surface Recruiters of Antibodies for Mediating Innate Immune Killing. Adv. Mater. 2023,35, 2303909. [CrossRef] [PubMed] 104. Ardabevskaia, S.N.; Milenin, S.A. From Dendrimers to Megamers: The State-of-the-Art. INEOS Open 2022 ,4, 176–188. [CrossRef] 105. Song, C.; Ouyang, Z.; Guo, H.; Qu, J.; Gao, Y.; Xia, J.; Shen, M.; Shi, X. Core–Shell Tecto Dendrimers Enable Enhanced Tumor MR Imaging through an Amplified EPR Effect. Biomacromolecules 2021,22, 2181–2188. [CrossRef] [PubMed] 106. Ni, C.; Ouyang, Z.; Li, G.; Liu, J.; Cao, X.; Zheng, L.; Shi, X.; Guo, R. A Tumor Microenvironment-Responsive Core-Shell Tecto Dendrimer Nanoplatform for Magnetic Resonance Imaging-Guided and Cuproptosis-Promoted Chemo-Chemodynamic Therapy. Acta Biomater. 2023,164, 474–486. [CrossRef] [PubMed] 107. Chen, F.; Kong, L.; Wang, L.; Fan, Y.; Shen, M.; Shi, X. Construction of Core–Shell Tecto Dendrimers Based on Supramolecular Host–Guest Assembly for Enhanced Gene Delivery. J. Mater. Chem. B 2017,5, 8459–8466. [CrossRef] [PubMed] Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.