scieee AI-readable full text Open interactive document viewer

Factors influencing AI chatbot adoption in government administration: A case study of Sri Lanka's digital government

Rathnayake, Arjuna Srilal,Truong Dang Hoang Nhat Nguyen,Ahn, Yonghan

Abstract

EconStor is a publication server for scholarly economic literature, provided as a non-commercial public service by the ZBW.

Full text

Rathnayake, Arjuna Srilal; Truong Dang Hoang Nhat Nguyen; Ahn, Yonghan Article Factors influencing AI chatbot adoption in government administration: A case study of Sri Lanka's digital government Administrative Sciences Provided in Cooperation with: MDPI – Multidisciplinary Digital Publishing Institute, Basel Suggested Citation: Rathnayake, Arjuna Srilal; Truong Dang Hoang Nhat Nguyen; Ahn, Yonghan (2025) : Factors influencing AI chatbot adoption in government administration: A case study of Sri Lanka's digital government, Administrative Sciences, ISSN 2076-3387, MDPI, Basel, Vol. 15, Iss. 5, pp. 1-29, https://doi.org/10.3390/admsci15050157 This Version is available at: https://hdl.handle.net/10419/321301 Standard-Nutzungsbedingungen: Die Dokumente auf EconStor dürfen zu eigenen wissenschaftlichen Zwecken und zum Privatgebrauch gespeichert und kopiert werden. Sie dürfen die Dokumente nicht für öffentliche oder kommerzielle Zwecke vervielfältigen, öffentlich ausstellen, öffentlich zugänglich machen, vertreiben oder anderweitig nutzen. Sofern die Verfasser die Dokumente unter Open-Content-Lizenzen (insbesondere CC-Lizenzen) zur Verfügung gestellt haben sollten, gelten abweichend von diesen Nutzungsbedingungen die in der dort genannten Lizenz gewährten Nutzungsrechte. Terms of use: Documents in EconStor may be saved and copied for your personal and scholarly purposes. You are not to copy documents for public or commercial purposes, to exhibit the documents publicly, to make them publicly available on the internet, or to distribute or otherwise use the documents in public. If the documents have been made available under an Open Content Licence (especially Creative Commons Licences), you may exercise further usage rights as specified in the indicated licence. https://creativecommons.org/licenses/by/4.0/ Received: 27 February 2025 Revised: 27 March 2025 Accepted: 3 April 2025 Published: 25 April 2025 Citation: Rathnayake, A. S., Nguyen, T. D. H. N., & Ahn, Y. (2025). Factors Influencing AI Chatbot Adoption in Government Administration: A Case Study of Sri Lanka’s Digital Government. Administrative Sciences, 15(5), 157. https://doi.org/10.3390/ admsci15050157 Copyright: © 2025 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/ licenses/by/4.0/). Article Factors Influencing AI Chatbot Adoption in Government Administration: A Case Study of Sri Lanka’s Digital Government Arjuna Srilal Rathnayake 1,* , Truong Dang Hoang Nhat Nguyen 2and Yonghan Ahn 3,* 1Department of Applied Artificial Intelligence, Hanyang University, Erica Campus, Ansan-si 15588, Republic of Korea 2Center for AI Technology in Construction, Hanyang University, Erica Campus, Ansan-si 15588, Republic of Korea; nhattr[email protected] 3Department of Architecture and Architectural Engineering, Hanyang University, Erica Campus, Ansan-si 15588, Republic of Korea *Correspondence: [email protected] (A.S.R.); [email protected] (Y.A.) Abstract: This study investigates the factors in acceptance of artificial intelligence (AI)- based chatbot application in Sri Lanka’s government administration services, which can be applied to developing countries, using an extended technology acceptance model (extended TAM) as a new research framework by adding external constructs such as trust, application design/appearance, and social influence to the technology acceptance model (TAM). Considering the sustainable implementation of AI, it is critical to understand user perspectives given the expanding and intricate integration of AI technology in government operations. Based on previous research, this study provides a structured survey to find out respondents’ thoughts on using AI chatbots to enhance government service delivery. With a valid sample size of 207 responses obtained from Sri Lanka, the data were analyzed using a covariance-based structural equation model (CB-SEM) to test the hypothesized relationships. The findings revealed that social influence (SI) has a positive and significant impact on trust (TR). Also, trust and application design (AD) have a positive and significant impact on perceived ease of use (PE), which in turn positively influenced perceived usefulness (PU) and then PE positively influenced attitude (AT) toward behavioral intention (BI) to accept AI chatbot applications in government administrative services. Therefore, this new model proved the effect of new external factors and highlights the importance of those factors in policy implementations for future AI-driven digital government initiatives. Keywords: AI chatbots; digital government; technology acceptance model; sustainable AI adoption; user acceptance; trust; e-government 1. Introduction Artificial intelligence technologies, especially chatbots, are being used more and more in the government and private sectors to enhance operational efficiency and service delivery to support sustainable government administration. With the use of these modern technologies, agencies are able to manage high volumes of external enquiries, offer 24/7 support, and enhance user experiences by instantly replying to enquiries (Chen et al., 2023). To meet citizens’ expectations for effective government administration and further digital government initiatives in Sri Lanka, it is imperative that AI be integrated into government organizations. AI is transforming governments by optimizing decision making procedures, boosting customer satisfaction, and cutting down on administrative work. Governments use AI technologies to examine enormous volumes of data, spot trends, and Adm. Sci. 2025,15, 157 https://doi.org/10.3390/admsci15050157 Adm. Sci. 2025,15, 157 2 of 29 decide on policies that will better serve the interests of the populace (Chiancone,2023). This skill is essential for solving complicated societal issues since artificial intelligence might provide insights that conventional analytical techniques can be lacking. AI has a wide range of possible uses, from public safety and traffic management to healthcare, where it can speed up drug discovery and greatly improve operational efficiency and response to citizen requirements. On the other hand, the use of AI in government functions raises significant ethical, accountability, and transparency issues. Organizations in the government sector must negotiate the challenges of ethically implementing AI technologies while guaranteeing that these platforms preserve principles like equity and inclusivity. Governments may automate repetitive questions, improve citizen interactions, and streamline internal procedures for employees by utilizing generative AI. But to reduce challenges and direct the moral use of AI in e-government initiatives, success depends on creating strong frameworks, educating staff, and establishing governance standards. Setting responsible practices as a top priority will be essential to building public trust and optimizing the advantages of these gamechanging technologies as the role of AI in the government developments. When it comes to government sector organizations adopting AI chatbots, putting new technologies into practice can be quite difficult and expensive (Hillemann,2023). Many governments are struggling with to achieve the advantages that AI technology and e-government initiatives are expected to yield (Medaglia & Tangi,2022;Mikalef et al.,2023). Significant financial losses have been caused by unsuccessful technological implementations, especially in the government sector, underscoring the need for predicting organizational and user needs. Low adoption of e-government solutions, like AI chatbots, is still a major obstacle, limiting both the physical and intangible benefits, even with the potential for development (Chen et al.,2023). The successful adoption of these technologies relies heavily on user approval and acceptance. User input, which is frequently restricted in its ability to assess technological viability, aids in the improvement of AI systems. The possibility of successful adoption can also be increased by gathering additional information and projections. It is possible to determine if a certain technology, such as AI chatbots, will be successfully incorporated into government sector operations by examining user attitudes and behavioral intents (Yigitcanlar et al.,2024). Over the last decade, there has been substantial development in understanding user adoption of new information technologies, particularly with the help of the TAM (F. D. Davis,1989). As a reliable framework for evaluating user adoption of developing technologies, this model has received both theoretical and experimental confirmation. For better explaining technology adoption, several scholars have expanded on TAM and proposed extended models that include further variables. These improved models give technical teams directions to optimize system design and allow decision-makers to assess new technical services. Despite its American origins, TAM has been shown in numerous studies (Alalwan et al.,2018;Alenazy et al.,2019;Hsu & Lu,2004;Saif et al.,2024) to be a valid model for describing the relationship between users and technology acceptance in a variety of scenarios. Though TAM has been identified as the most suitable theoretical foundation to identify the significance of user behavior and acceptance of modern technologies, the lack of extended TAM applications in government AI adoption can be explained as one of identified research gaps. Most of the existing studies on technology adoption in e-government rely on TAM or Unified Theory of Acceptance and Use of Technology (UTAUT) models without incorporating additional constructs (Venkatesh & Bala,2008). However, emerging research suggests that factors like trust, application design/appearance, and social influence are critical in AI-based applications (Kelly et al.,2023;Omrani et al.,2022). So, Adm. Sci. 2025,15, 157 3 of 29 this study extends TAM by incorporating these factors, addressing this theoretical gap. Also, there are many research studies that have been carried out on chatbot adoption in private sectors such as e-commerce, healthcare, and banking. In addition, similar research studies focusing on government sectors remain less common or none existent (Zuiderwijk et al.,2021). Government sector AI adoption differs due to factors such as administrative structures, regulatory limitations, and citizen confidence concerns. Therefore, this research study is trying to fill this gap by focusing specifically on AI chatbot adoption within Sri Lanka’s digital government services. Furthermore, most of those previous studies on AI chatbot adoption are focused on developed countries and technologically advanced environments (Huang & Rust,2018;Kasilingam & Krishna,2022). There is a lack of empirical research on AI adoption in developing countries, particularly in South Asia. Therefore, this study provides a Sri Lankan perspective, contributing specific insights and addressing the gap in non-developed, minimum technologically advanced countries in e-government adoption studies. The following studies have extended TAM to explore technology adoption in egovernment. However, these studies often focus on general e-government services, rather than AI-based e-government chatbots. An article on AI chatbot adoption (Gopinath & Kasilingam,2023) focused on the commercial sector and it was not in a government administration context. Another study (Shareef et al.,2011) focused on general e-government services, not AI chatbots in the context of e-government services. An (Sharma & Agarwal, 2024) article on AI chatbot adoption focused on the education sector, and it did not consider application design. Additionally, an article on AI chatbots in customer service (Kunz & Wirtz,2023) examined private sector chatbots, not government sector ones. Our study suggests a unique TAM extension by integrating trust, application design/appearance, and social influence in the context of AI chatbots for public administration services in Sri Lanka to analyze and understand how the users’ perceptions of the acceptance of AI chatbot applications in government organizations influence their satisfaction with the use of these AI technologies. To achieve this objective, a structural equation modeling approach was applied, a statistical technique that allows the simultaneous evaluation of multiple relationships between unobservable latent variables. This approach is effective for exploring how the mentioned factors affect user intentions to use AI chatbots in government administration services. By focusing on how the newly identified external constructs influence user behavior and focusing on actual AI chatbot acceptance, this study aims to offer a new model that can guide governments and government policy makers to design a sustainable technology acceptance plan for successful e-government service delivery for developing countries. Current Availability of E-Government Services in Sri Lanka Sri Lanka has succeeded in making considerable progress in the implementation of e-government services over the past ten years. The Sri Lankan government has recognized the potential of digital transformation to enhance government efficiency, effectiveness, and improve citizens’ access to day-to-day services. However, the intensity of digital environment adoption and the availability of e-services vary across different government sector organizations and services. The Sri Lankan government has initiated some e-government platforms to provide e-services to citizens. One of the key initiatives is the Sri Lanka Government Portal, which serves as a central hub for accessing various e-services. Key services such as tax filing, vehicle revenue licensing, online appointment reservation, and payment of utility bills are available through these digital platforms. However, the use of AI chatbots in public administration is still in its nascent stages, and no government agencies have fully implemented these e-systems to support administrative services to citizens. Adm. Sci. 2025,15, 157 4 of 29 When we consider the actual usage and citizen adoption for those e-services, it varied based on the geographical and development area. Urban and developed areas, where access to the internet service and digital infrastructure is better, have seen sophisticated usage compared to rural areas, where there are issues such as limited internet service connectivity and digital literacy. Traditional methods such as in-person visits to government offices and paper-based document processing are continuing to lead in many government offices in undeveloped rural areas. Although the Sri Lankan government put efforts to digitalize government services, some citizens and public sector employees are either unfamiliar, resistant to change, or lack of trust in e-government platforms, resulting in lower usage and adoption of e-services. 2. Theoretical Framework and Hypotheses Development The acceptance of AI technological application is complicated due to its structure, and the TAM alone cannot be a comprehensive tool for this. TAM needs to be merged with other significant constructs that guide the plan to a new model, compatible with latest AI technological aspects such as chatbot applications. In this study, evolving and accumulating a comprehensive list of customer behavior determinants of sustainable AI technology acceptance is to assess the impact of these indicators. The customer can decide whether to take the right interventions or not to maximize the effective utilization of the new transaction technology. However, the AI chatbot application is new and has complicated characteristics in terms of adoption and development in government sector organizations. Three identified constructs may play direct and indirect roles in the sustainable adoption of AI chatbot application, remarkably in the government administration service initiatives in the Sri Lankan context (trust, application design/appearance, and social influence). 2.1. Technology Acceptance Model (TAM) The TAM (Figure 1) has been used in research to explore the acceptance of new technology or new services (F. D. Davis,1989;F. D. Davis & Venkatesh,1996). TAM is one of the most effective contributions of Ajzen and Fishbein’s theory of reasoned action (TRA). Davis’s technology acceptance model, TAM (F. D. Davis,1989;F. D. Davis & Venkatesh, 1996), is the most widely utilized model of acceptance and usage of innovative technology by users. Adm. Sci. 2025, 15, x FOR PEER REVIEW 4 of 30 and payment of utility bills are available through these digital platforms. However, the use of AI chatbots in public administration is still in its nascent stages, and no government agencies have fully implemented these e-systems to support administrative services to citizens. When we consider the actual usage and citizen adoption for those e-services, it varied based on the geographical and development area. Urban and developed areas, where access to the internet service and digital infrastructure is better, have seen sophisticated usage compared to rural areas, where there are issues such as limited internet service connectivity and digital literacy. Traditional methods such as in-person visits to government offices and paper-based document processing are continuing to lead in many government offices in undeveloped rural areas. Although the Sri Lankan government put efforts to digitalize government services, some citizens and public sector employees are either unfamiliar, resistant to change, or lack of trust in e-government platforms, resulting in lower usage and adoption of e-services. 2. Theoretical Framework and Hypotheses Development The acceptance of AI technological application is complicated due to its structure, and the TAM alone cannot be a comprehensive tool for this. TAM needs to be merged with other significant constructs that guide the plan to a new model, compatible with latest AI technological aspects such as chatbot applications. In this study, evolving and accumulating a comprehensive list of customer behavior determinants of sustainable AI technology acceptance is to assess the impact of these indicators. The customer can decide whether to take the right interventions or not to maximize the effective utilization of the new transaction technology. However, the AI chatbot application is new and has complicated characteristics in terms of adoption and development in government sector organizations. Three identified constructs may play direct and indirect roles in the sustainable adoption of AI chatbot application, remarkably in the government administration service initiatives in the Sri Lankan context (trust, application design/appearance, and social influence). 2.1. Technology Acceptance Model (TAM) The TAM (Figure 1) has been used in research to explore the acceptance of new technology or new services (Davis, 1989; Davis & Venkatesh, 1996). TAM is one of the most effective contributions of Ajzen and Fishbein’s theory of reasoned action (TRA). Davis’s technology acceptance model, TAM (Davis, 1989; Davis & Venkatesh, 1996), is the most widely utilized model of acceptance and usage of innovative technology by users. Figure 1. TAM. Figure 1. TAM. Users’ perceptions about the actual utility of technology (actual system use) were found to be related to their attitude and behavioral intention to use the technology. Perceived usefulness exhibits a more harmonious association with utilization than the other model variables. As a result, this study decides to incorporate perceived usefulness and perceived ease of use into a new study paradigm. Perceived usefulness is defined as the extent to which a user believes that adopting a certain system will improve work perfor- Adm. Sci. 2025,15, 157 5 of 29 mance. Perceived ease of use is the degree to which a user believes that utilizing a specific system will be effortless and easily adopted. 2.2. Hypothesis and Model Development According to the proven literature, TAM has yielded good results for calculating the behavioral intention to use the new technology (Edo et al.,2023;Ikhsan et al.,2025;Natasia et al.,2022;Saif et al.,2024). However, there is a lack of a TAM to obtain good results that value the acceptance of the latest advanced technologies, and the development of this extended TAM is required to achieve this approach. Furthermore, we identified three new factors that are not explained in the TAM (trust, application design/appearance, social influence). Also, these factors are considered important according to many experts in AI technology and the characteristics and unique structure of this technology. This paper will introduce a new research model with two parts and will explain them in detail with each hypothesis: first, the fundamental TAM constructs (behavior intention, attitude, perceived usefulness, perceived ease of use) and second, external constructs (trust, application design/appearance, and social influence). 2.2.1. TAM-Fundamental Constructs Behavior Intention (BI) According to behavioral psychology, user behavior is influenced by intentionality, it also relates to the user’s perceived possibility or probability that they will engage in a specific behavior, in this case, experiencing the new technology (Malhotra & Galletta,1999). Behavioral intention aids in the identification of well-formed measures of user acceptance early in the system development life cycle. Furthermore, it assists clients in accepting helpful innovations or rejecting wrong and harmful ones, hence reducing the danger of giving inferior technologies prior to rejection (F. Davis et al.,1989;F. D. Davis,1989). Another study suggested that the Perceived usefulness of a technology directly influences users’ behavioral intention to use it (Ilyas et al.,2023). Specifically, when users perceive technology as more beneficial, they are more likely to accept and utilize it. Behavioral intention refers to a user’s subjective motivations for performing a behavior on a system. The intention to use such a system is driven by user purpose behavior (Warshaw & Davis,1985). Also, another author found that perceived moral values act as a unique performance of behavioral intention (Ajzen & Fishbein,1970). Perhaps the user influences behavioral intentions based on their attitudes and values in such a morality scenario (Gorsuch & Ortberg,1983). Another article indicated that habit was a more potent predictor of classroom behavior than intentions. However, a post-research analysis supported the idea that intentions become important when the habit component can be suppressed (Landis et al.,1978). The attitude and intention relationship was attenuated when the extent of past behavior was included as an explanatory variable. Similarly, past behavior lessened the impact of intentions on behavior (Bagozzi,1981). There is evidence linking several dimensions to behavior, and there is a correlation between cognitive and behavioral measurements, which were defined more by chance than by formal logic (Warshaw,1980). Another author revealed that additional study is required to examine PU and PE from a broad perspective in order to calculate the impact of outside variables on these internal behavioral findings ( F. D. Davis,1989 ). Intentionality in behavior is the ultimate objective. As mentioned above, numerous studies have identified measures of attitude and then calculated how closely they correlate with behavior. A more logical course of action would be to concentrate on behavior measurement and prediction, which would lead to the identification of the primary factors and characteristics influencing consumers’ behavioral intention to embrace AI chatbot technology. Therefore, the user behavioral Adm. Sci. 2025,15, 157 6 of 29 intention to accept AI chatbot application in the Sri Lankan e-government movement needs to be identified and weighted when analyzing such enhanced model. Attitude (AT) Regarding intentionality, the term “attitude” describes how a user feels about the new technology, whether positively or negatively (F. Davis et al.,1989;F. D. Davis,1989). The theory of reasoned action (TRA) (Fishbein & Ajzen,1975) led researchers to find that the actual behavior, an attitude towards utilizing and investigating objects such a technological system, is referred to as the user belief system. When determining their behavioral intentions, people consider their attitudes towards each of the available options. It seems that the attitude towards similar choice processes does not reveal how an individual forms their opinions about whether or not to carry out several tasks (Sheppard et al.,1988). Considering desires and the causes of the urge could affect the salient result of the goal behavior. The normative beliefs and attitude values can be merged under the average of anticipation (F. Davis,1985;F. Davis et al.,1989). According to several studies, one’s attitude can influence and be influenced by the attitudes of others (Ajzen & Fishbein,2000, 2005). It has been assumed that social influence processing is crucial to a new system’s acceptability (Ajzen & Fishbein,2005). Furthermore, the use of new technology itself may cause attitudes towards it to shift, which could directly affect organizational structure, communication styles, and working locations (Cuel & Ferrario,2009;Rice & Aydin,1991). Also, another study shows that the attitude and behavioral intention toward a specific application is determined by the usefulness perception, while its usefulness is influenced by several external factors (Prabowo & Nugroho,2019;Wang et al.,2023). Similarly, a strong correlation between attitude and user behavior links is guaranteed when appropriate measurement execution is used (Ajzen & Fishbein,1977). As a result, the TAM and further study findings have validated the association and consequences between attitude and behavioral intention. Based on those validated concepts, it can be stated that the attitude of citizens toward the acceptance of AI chatbots will influence their behavioral intention to use these e-government systems in the future. A positive attitude is necessary for adoption, as it reflects a willingness to engage with the new technology. In Sri Lanka, the adoption of digital initiatives in government services has been slow due to concerns about efficiency and trustworthiness. However, as AI-powered chatbots promise to streamline government services, citizens’ positive attitudes towards the perceived benefits can increase their intention to use these services. Citizens who find the chatbot useful and easy to interact with are more likely to adopt it. Therefore, the following hypothesis is made: Hypothesis 1 (H1): Attitude has a positive and significant impact on behavioral intention toward AI chatbot application adoption in government administration services. Perceived Usefulness (PU) The extent to which a user feels that utilizing the new technology will improve his or her performance is known as perceived usefulness (F. Davis,1985;F. D. Davis,1989). This author discovered that the targeted partial intervention could affect attitudes and beliefs (F. D. Davis,1989) . Perceived usefulness is strongly influenced by intention, but attitude has a limited correlation with perceived usefulness (Maria & Sugiyanto,2023). This was clarified in his writings which surveyed the topic of people who wish to use helpful technology despite having a negative attitude towards it. Theoretically, PU is a positive aspect; users are more likely to support an application based on its performance capabilities and abilities than on how easy or hard the system is to use, which affects service adoption (F. Davis et al.,1989). This suggests that the characteristics of perceived usefulness are connected and affect the degree of use (Adams et al.,1992). Adm. Sci. 2025,15, 157 7 of 29 User PU can be caused by a variety of variables, such as environmental factors, that have the potential to significantly alter consumer perceptions (Banjarnahor,2017). It is suggested that the contextual factors of perceived environmental uncertainty and decentralization will affect the PU of aggregated data. The benefits of the prior integration of PU in things like technology systems are explained by certain discoveries (Saade & Bahli,2005). From another perspective, another study found that PU and enjoyment had a comparable effect on the frequency and time of use; the effect of computer anxiety was more about enjoyment than perceived usefulness (Igbaria et al.,1994). Since many components of the system environment and PU had a major impact on PE for the technology system, there was a direct impact on the information technology system, particularly on perceived ease of use (Karahanna & Straub,1999). Considering those previous studies, the suggestion is that the usefulness of AI chatbots will shape citizens’ attitudes toward their use. Sri Lankan citizens often experience inefficiency in public service delivery. If the chatbot application is seen as improving service delivery and addressing government service challenges, users are more likely to gain a positive attitude towards accepting it. A useful chatbot that reduces waiting times, provides instant feedback, and manages routine tasks effectively will generate a positive attitude toward its adoption. Then, the citizens will motivate themself to use the chatbot if they perceive it as an effective solution to current service shortcomings. Therefore, the following hypothesis is made: Hypothesis 2 (H2): Perceived usefulness has a positive and significant impact on attitudes towards AI chatbot application adoption in government administration services. Perceived Ease of Use (PE) The degree to which people believe that utilizing the new technology would be effortless is known as perceived ease of use (F. Davis,1985; F. Davis et al.,1989 ). PE in the TAM is one of the primary constructs. This construct has two direct constructive effects on PU and AT (F. Davis et al.,1989). Numerous studies have endorsed and employed TAM theory to estimate consumer behavior with new technologies (F. Davis,1985; F. Davis et al.,1989 ). PE is the likelihood that users will expect the intended system to be effortless (Grani´c & Maranguni´c,2019;Mathieson,1991). In construction, PE is the degree to which the user anticipates and thinks that utilizing this service or technical system will be effortless (F. Davis et al.,1989;Nakisa et al.,2023). When attempting to convey the emotions and aspirations of the clients to the service providers, creating a system that is simple, responsive, easy to use, easy to manage, and adaptable is crucial to achieving our really challenging objectives (Gould & Lewis,1985). PE was taken into consideration by many researchers to determine user acceptance. Additionally, even though all but a few of these researchers received the anticipated results regarding PE, the TAM was widely used in practice in this field (Venkatesh,2000). The significance of firsthand experience in locating the PE was validated by the findings of earlier user acceptance studies that focused on actual use (Calisir & Calisir,2004;Gefen & Straub,2000;Hackbarth et al.,2003;Saade & Bahli,2005;Venkatesh & Davis,1996). The PE of AI chatbots will influence citizens’ attitudes toward them. If users find the system easy to use, their attitude towards using it will be more positive. In Sri Lanka, digital literateness is an important factor in the acceptance of modern technology. Most suburban Sri Lankans may not have sound technical skills, so a chatbot that is simple and user-friendly will positively build their attitudes toward using it. As AI technology is still new to many areas, ensuring ease of use can improve technological concerns, leading to a more favorable perception of the system. Also, if the chatbot is easier to use, it will be more useful. Then, citizens will find that the chatbot is more efficient and easier and will be more Adm. Sci. 2025,15, 157 8 of 29 likely to believe in it and use it in government services. Ease of use is critical aspect in a developing country like Sri Lanka. Because a considerable percentage of the population has limited access to modern technological tools. If government chatbot applications are simple to experience, users will perceive it as a useful tool for engaging with Sri Lankan e-government services. Therefore, the following hypotheses are made: Hypothesis 3 (H3): Perceived ease of use has a positive and significant impact on attitude toward AI chatbot application adoption in government administration services. Hypothesis 4 (H4): Perceived ease of use has a positive and significant impact on perceived usefulness toward AI chatbot application adoption in government administration services. 2.2.2. External Constructs The following external constructs are adopted according to environmental and technology characteristics. Moreover, some studies that have ensured these definitions and relationships are shown in Table 1. Table 1. Definitions for external constructs. External Construct General Conceptualization Source(s) Trust Trust involves the confidence that users place in a technology, believing that it can perform its functions reliably and will act in the users’ best interest. (Burke et al.,2007;Dhagarra et al.,2020; Hasija & Esper,2022;Hong,2025; Jarvenpaa et al.,2000) Application Design/ Appearance Application design and appearance refer to the visual and functional elements of technology that influence user perceptions, affecting usability, satisfaction, and acceptance. (Hoehle & Venkatesh,2015; Zhou et al.,2009) Social Influence Social influence pertains to the impact that peers, family, and larger social networks have on individuals’ attitudes and behaviors toward adopting new technologies. (Chaouali et al.,2016;Cheng et al.,2022) Trust (TR) Trust is the degree to which consumers feel secure, at ease, and confident when utilizing technology (Jarvenpaa et al.,2000;McCloskey,2006). Factors that either directly or indirectly motivate individuals to adopt technology include trust, security, and privacy (Matemba & Li,2017). A trustworthy system that adjusts to the unavoidable changes in trust can manage the way social interactions change over time (Golbeck & Kuter,2009). Individuals with positive opinions about a given technology may be more open to trust and feel more secure about it than those with unfavorable sentiments. When trust is taken into account, this demonstrates strong partial correlations between risk and acceptance (Eiser et al.,2006). Also, another research study indicated that e-commerce chatbots enhance trust and accessibility, encouraging users to become less willing to take chances and better protecting them against the likelihood of untrustworthiness situations (Celik et al., 2022). In the case of new technology-based applications, trust should be high, and the risk probability should be reduced. Both mindset and the PE of the available technology are directly impacted by trust. Trust is the key element of this study, and this factor shows a significant indirect effect on customer behavior. Trust has the power to influence a customer’s choice of technology or even service (Kesharwani & Bisht,2012). Adm. Sci. 2025,15, 157 15 of 29 nant validity (Fornell–Larcker criterion). Meanwhile, the structural model was evaluated using path coefficients and p-values. 4. Results The theoretical model of this research was based on the use of a covariance-based structural equation modeling approach. The data analyzed in IBM SPSS AMOS (V.23) resulted in two models: a measurement model (see Figure 3), which evaluates the reliability of the constructs, validity, and model fit and a structural model, which addresses the hypotheses, direct-indirect-total effects related to the successful AI chatbot adoption in government administration services in Sri Lanka. Adm. Sci. 2025, 15, x FOR PEER REVIEW 15 of 30 constructs were assessed through a measurement model utilizing a Confirmatory Factor Analysis (CFA) with IBM SPSS AMOS (V23). The methodological technique involved evaluating both measurement and structural models. The structural model examined latent variable associations, whereas the measurement model assessed reliability and validity. The reflective measurement model was evaluated based on indicator loadings, internal consistency reliability (Cronbach’s alpha and composite reliability), convergent validity (average variance extracted), and discriminant validity (Fornell–Larcker criterion). Meanwhile, the structural model was evaluated using path coefficients and p-values. 4. Results The theoretical model of this research was based on the use of a covariance-based structural equation modeling approach. The data analyzed in IBM SPSS AMOS (V.23) resulted in two models: a measurement model (see Figure 3), which evaluates the reliability of the constructs, validity, and model fit and a structural model, which addresses the hypotheses, direct-indirect-total effects related to the successful AI chatbot adoption in government administration services in Sri Lanka. Figure 3. Measurement model. 4.1. Measurement Model Assessment—Reliability, Validity, and Cross Loadings Every measurement item needs to have its validity, reliability, and factor loading assessed. A measure’s consistency is its reliability. When a measure yields consistent results under consistent circumstances, it is deemed trustworthy (J. Hair et al., 2022). For each item loading to be deemed reliable, the value must be equal to or greater than (0.5). Cronbach’s alpha (α) and composite reliability (CR) ratings were used to assess the construct’s internal consistency. Cronbach’s alpha, with recommended values of 0.7 to 0.8, measures how well a set of objects represents a unidimensional latent concept. Cronbach’s alpha values for all constructs exceeded the commonly accepted threshold of 0.70, Figure 3. Measurement model. 4.1. Measurement Model Assessment—Reliability, Validity, and Cross Loadings Every measurement item needs to have its validity, reliability, and factor loading assessed. A measure’s consistency is its reliability. When a measure yields consistent results under consistent circumstances, it is deemed trustworthy (J. Hair et al.,2022). For each item loading to be deemed reliable, the value must be equal to or greater than (0.5). Cronbach’s alpha ( α ) and composite reliability (CR) ratings were used to assess the construct’s internal consistency. Cronbach’s alpha, with recommended values of 0.7 to 0.8, measures how well a set of objects represents a unidimensional latent concept. Cronbach’s alpha values for all constructs exceeded the commonly accepted threshold of 0.70, indicating satisfactory internal consistency. Composite reliability, with recommended values greater than 0.7, assesses the dependability of indicators connected with a specific element. While both metrics reflect internal consistency, CR is preferable to Cronbach’s alpha for constructlevel assessments in structural equation modeling analysis. In this study, Cronbach’s alpha values ranged from 0.765 to 0.923, and CR values ranged from 0.850 to 0.946 for all constructs, confirming that they exhibit acceptable internal consistency. Adm. Sci. 2025,15, 157 16 of 29 Then, construct validity was assessed using a convergent validity technique; the average variance extracted (AVE), which is the grand mean value of the squared loadings of the items relevant to the construct, is the typical metric for proving convergent validity. Validity is the degree to which a construct’s indicators jointly measure. To this extent, a latent construct explains the variation in its indicators. When the AVE value is 0.5 or higher, it indicates that the construct explains over half of the variation in its elements (J. Hair et al., 2016). As described in Table 3, all AVE values are greater than 0.5. This proves that the convergent validity of the constructs of this study is satisfied. Table 3. Measurement model factor loadings, reliability, and internal consistency. Factor Code Description Loading AVE C.R C.A Trust TR1 Chatbot application is trustworthy 0.767 0.589 0.850 TR2 Chatbot application providers give the impression that they keep promises and commitments on information provided 0.752 0.765 TR3 Chatbot application providers keep my best interests in mind. 0.854 TR4 Chatbot can address my issues 0.686 Application Design/ Appearance AD1 I will accept this chatbots application if the design to be similar to other systems that I used or know of. 0.698 0.716 0.909 0.864 AD2 I will accept this chatbot application if the chatbots service application is simple to navigate. 0.898 AD3 I will accept this chatbot application if it clearly generates and shows my required response. 0.908 AD4 I will accept this chatbot application if it operates effectively and free from technical issues. 0.865 Social Influence SI1 I will use this chatbot application if the service is widely used by people in my community. 0.658 0.704 0.903 0.858 SI2 I think that I will adopt this chatbot application if my supervisors/seniors use it. 0.862 SI3 I think that I will adopt this chatbot application if my friends use it. 0.921 SI4 I will adopt this chatbot application if my family members/relatives use it. 0.889 Perceived Ease of Use PE1 I think learning to operate the chatbot application would be easy for me 0.789 0.683 0.866 0.767 PE2 I believe it would be easy to get the chatbot application to accomplish what I want to do. 0.841 PE3 It is easy for me to become skillful at using this chatbot application. 0.848 Perceived Usefulness PU1 Using this chatbot application would improve the quality of public service. 0.861 0.771 0.931 0.900 PU2 Using this chatbot application would increase my productivity. 0.866 PU3 Using this chatbot application would save time on getting government information and services. 0.905 PU4 I believe this chatbot application is useful for delivery of public services online to citizens. 0.879 Adm. Sci. 2025,15, 157 17 of 29 Table 3. Cont. Factor Code Description Loading AVE C.R C.A Attitude AT1 It is a good idea to use a chatbot application in the public sector. 0.889 0.815 0.946 0.923 AT2 It is wise to use a chatbot application in the public sector. 0.907 AT3 I like to use a chatbot application in the public sector. 0.930 AT4 It is pleasant to use a chatbot application in public sector. 0.883 Behavioral Intention BI1 If I have access to this chatbot application, I intend to use it. 0.878 0.740 0.895 0.817 BI2 If I have access to this chatbot application, I will use it. 0.899 BI3 I plan to use this chatbot application within the next 6 months. 0.800 Note: AVE—average variance extracted; C.R—composite reliability; C.A—Cronbach’s alpha. For further analysis of construct validity, the discriminant validity technique will be used in this study. Discriminant validity uses the uniformity and validity of concentration to confirm whether each component is important on its own without interfering with other factors. The Fornell and Larcker approach is used to evaluate discriminant validity, which is a crucial aspect of measurement model reliability and validity (Fornell & Larcker, 1981). This method compares the square root of the AVE of a construct to the correlations between other constructs. The diagonal value must be bigger than the correlations between other constructs. According to Table 4, the AVE for each construct exceeds the correlations between that construct and any other construct in this study model. For example, TR exhibited a square root of AVE of 0.767, which is significantly higher than its correlations with other constructs. It indicates that the constructs explain more variance in their respective items than they share with other constructs. Therefore, even beyond the standard AVE values, the Fornell and Larcker criterion confirms that this measurement model has strong discriminant validity. Table 4. Discriminant validity is based on Fornell and Lacker criterion. TR AD SI PE PU AT BI TR 0.767 AD 0.223 0.846 SI 0.356 0.341 0.839 PE 0.455 0.516 0.296 0.826 PU 0.323 0.440 0.227 0.652 0.878 AT 0.215 0.221 0.166 0.395 0.600 0.903 BI 0.258 0.553 0.217 0.544 0.658 0.401 0.860 Note. TR—trust; AD—application design/appearance; SI—social influence; PE—perceived ease of use; PU—perceived usefulness; AT—attitude; BI—behavioral intention. Also, Variance Inflation Factor (VIF) values were computed utilizing Squared Multiple Correlations (SMC) acquired from AMOS to evaluate multicollinearity among the latent components. The findings show that all constructs’ VIF values (TR = 1.25, PE = 1.57, PU = 1.65 , AT = 1.63, BI = 1.22) are significantly below the suggested cutoff of 5. VIF values less than 5 indicate that multicollinearity is not an issue (J. F. Hair et al.,2019). As a result, the constructs in this study are independent, guaranteeing the objectivity of the structural model’s prediction correlations. Adm. Sci. 2025,15, 157 18 of 29 To estimate the cross-loading, the loading of each indicator should be higher than the loadings of its corresponding variables’ indicators. According to Table 5, the cross-loading criterion is perfect; most of the items have values more than (0.7) and their highest value is when compared with other items. Table 5. Cross-loading results. TR AD SI PE PU BI AT TR1 0.761 −0.032 0.123 0.042 0.058 0.154 0.077 TR2 0.821 −0.011 −0.075 −0.086 0.220 0.110 −0.048 TR3 0.786 0.109 0.206 0.268 −0.004 0.023 0.068 TR4 0.519 0.197 0.243 0.374 0.056 −0.147 0.237 AD1 0.105 0.657 0.298 0.037 0.143 0.034 −0.045 AD2 −0.009 0.865 0.141 0.121 0.075 0.081 0.140 AD3 0.005 0.845 0.091 0.187 0.202 0.188 0.014 AD4 0.041 0.794 0.055 0.189 0.084 0.244 0.087 SI1 0.039 0.309 0.526 0.011 0.152 0.307 0.233 SI2 0.122 0.093 0.862 −0.022 −0.018 0.023 0.055 SI3 0.090 0.139 0.895 0.133 0.074 0.054 0.039 SI4 0.079 0.125 0.879 0.122 0.046 0.003 0.009 PE1 0.067 0.252 0.109 0.741 0.026 0.050 0.253 PE2 0.148 0.083 0.045 0.689 0.329 0.237 0.092 PE3 0.086 0.172 0.075 0.742 0.307 0.159 0.046 PU1 0.112 0.218 0.025 0.133 0.776 0.120 0.248 PU2 0.103 0.219 0.009 0.253 0.661 0.265 0.303 PU3 0.119 0.119 0.083 0.192 0.817 0.177 0.237 PU4 0.069 0.070 0.106 0.127 0.781 0.241 0.299 BI1 0.061 0.313 0.074 0.221 0.155 0.736 0.216 BI2 0.026 0.282 0.028 0.084 0.320 0.740 0.174 BI3 0.170 0.052 0.087 0.101 0.205 0.785 0.032 AT1 0.033 0.050 0.066 0.139 0.254 0.102 0.827 AT2 0.089 0.032 0.101 0.112 0.204 0.015 0.862 AT3 −0.001 0.078 0.046 0.035 0.253 0.056 0.894 AT4 0.081 0.052 0.008 0.121 0.127 0.216 0.844 Note: The bold values represent the loadings of each indicator on its corresponding variable. 4.2. Model Fit Measures The model fit was assessed through eight indices: CMIN/DF, Root Mean Square Error of the Approximation (RMSEA), Comparative Fit Index (CFI), Normed Fit Index (NFI), Tucker-Lewis Index (TLI), Incremental Fit Index (IFI), ParsimonyGoodness Measures (PGFI), Goodness-of-Fit Index (GFI). Therefore, this study confirms the model fit (Table 6) validity according to J. F. Hair et al. (2017). Table 6. Model fit indices. Measures of Fit Indices Values Recommended Values Discrepancy measurements CMIN/DF 1.860 (<2) (RMSEA) 0.065 (0–0.1) Comparative Fit Index (CFI) 0.923 (0.9–1) Incremental adjustment measures Normed Fit Index (NFI) 0.902 (0.9–1) Tucker–Lewis Index (TLI) 0.906 (0.9–1) Parsimony-adjusted and related measures Incremental Fit Index (IFI) 0.925 (0.9–1) Parsimony-Goodness Measures (PGFI) 0.757 (0.5–1) Goodness-of-Fit Index (GFI) 0.914 (0.9–1) Adm. Sci. 2025,15, 157 19 of 29 According to the above values, the overall fit indices indicate that the model has a good fit for the data. The CMIN/DF and RMSEA values fall within the acceptable range, and the incremental measures (CFI, NFI, TLI, IFI), along with the parsimony-adjusted measures (PGFI, GFI), all meet or exceed the recommended thresholds. This comprehensive set of indices confirms that the proposed model is strong enough and provides an adequate representation of the study data. 4.3. Structural Model Assessment The structural model was evaluated by calculating the disparity between dependent variables. According to the overall model fit indices, the indication is that the structural model has a good fit for the data. The CMIN/DF = 2.033 and RMSEA = 0.071 confirms that those values fall within the acceptable range and the incremental measures ( CFI = 0.929 , NFI = 0.908 , TLI = 0.907, IFI = 0.931), along with the parsimony-adjusted measures ( PGFI = 0.787 , GFI = 0.909), all meet or exceed the recommended thresholds. This comprehensive set of indices confirms that the proposed structural model is strong enough and provides an adequate representation of the study data. Also, it is estimated primarily by path coefficients. A path coefficient in a structural model is a number that shows how two variables are related to one another. It shows how the value of one variable changes by one standard deviation unit when the value of another variable changes. Typically, path coefficients fall between − 1 and 1, where values nearer − 1 signify a strong negative link and values nearer 1 indicate a strong positive relationship. Therefore, it can clearly explain that the constructs of the proposed model have almost strong positive relationships. According to the path analysis (see Figure 4), Table 7found each hypothesis by estimating the p-values and the path coefficients. It can be noted that six hypotheses are supported, while the remaining three are not supported, which in turn indicates that most of the paths are significant between the independent and dependent variables. Adm. Sci. 2025, 15, x FOR PEER REVIEW 19 of 30 Parsimony-adjusted and related measures Incremental Fit Index (IFI) 0.925 (0.9–1) ParsimonyGoodness Measures (PGFI) 0.757 (0.5–1) Goodness-o f -Fit Index (GFI) 0.914 (0.9–1) According to the above values, the overall fit indices indicate that the model has a good fit for the data. The CMIN/DF and RMSEA values fall within the acceptable range, and the incremental measures (CFI, NFI, TLI, IFI), along with the parsimony-adjusted measures (PGFI, GFI), all meet or exceed the recommended thresholds. This comprehensive set of indices confirms that the proposed model is strong enough and provides an adequate representation of the study data. 4.3. Structural Model Assessment The structural model was evaluated by calculating the disparity between dependent variables. According to the overall model fit indices, the indication is that the structural model has a good fit for the data. The CMIN/DF = 2.033 and RMSEA = 0.071 confirms that those values fall within the acceptable range and the incremental measures (CFI = 0.929, NFI = 0.908, TLI = 0.907, IFI = 0.931), along with the parsimony-adjusted measures (PGFI = 0.787, GFI = 0.909), all meet or exceed the recommended thresholds. This comprehensive set of indices confirms that the proposed structural model is strong enough and provides an adequate representation of the study data. Also, it is estimated primarily by path coefficients. A path coefficient in a structural model is a number that shows how two variables are related to one another. It shows how the value of one variable changes by one standard deviation unit when the value of another variable changes. Typically, path coefficients fall between −1 and 1, where values nearer −1 signify a strong negative link and values nearer 1 indicate a strong positive relationship. Therefore, it can clearly explain that the constructs of the proposed model have almost strong positive relationships. According to the path analysis (see Figure 4), Table 7 found each hypothesis by estimating the p-values and the path coefficients. It can be noted that six hypotheses are supported, while the remaining three are not supported, which in turn indicates that most of the paths are significant between the independent and dependent variables. Figure 4. Path coefficient of structural model. The results of this paper found that AT (β = 0.370, CR = 5.481, p < 0.001) has a positive and significant impact on BI, suggesting that Hypothesis 1 is supported in this analysis (see Table 7). It clearly describes how attitude has been found to have a significant favorable impact on the behavioral intention of users who plan to utilize AI chatbot applications in the government sector in Sri Lanka. Figure 4. Path coefficient of structural model. The results of this paper found that AT ( β = 0.370, CR = 5.481, p< 0.001) has a positive and significant impact on BI, suggesting that Hypothesis 1 is supported in this analysis (see Table 7). It clearly describes how attitude has been found to have a significant favorable impact on the behavioral intention of users who plan to utilize AI chatbot applications in the government sector in Sri Lanka. Adm. Sci. 2025,15, 157 20 of 29 Table 7. Hypotheses test results. Hypothesis Path Standard Estimates Standard Error Critical Ratio p-Value H1 BI ←AT 0.370 0.068 5.481 *** H2 AT ←PU 0.745 0.127 5.865 *** H3 AT ←PE −0.041 0.179 −0.228 0.820 H4 PU ←PE 0.855 0.137 6.22 *** H5 AT ←TR 0.247 0.139 1.777 0.076 H6 PE ←TR 0.401 0.100 4.03 *** H7 PE ←AD 0.404 0.084 4.829 *** H8 PU ←SI 0.053 0.094 0.56 0.575 H9 TR ←SI 0.445 0.105 4.217 *** Note: ***, p< 0.001. Also, PU ( β = 0.745, CR = 5.865, p< 0.001) has a positive and significant impact on AT, supporting Hypothesis 2. On the other hand, PE ( β = − 0.041, CR = − 0.228, p= 0.820) has a negative and not satisfactory impact on AT, not supporting Hypothesis 3. The three constructs of PU, PE, and TR show mixed effects on the user attitude toward sustainable AI chatbot application adoption in government administration services. These effects are related to the user’s trust and beliefs. User attitude is important in influencing the right behavior and action. The three constructs affect different attitudes. High trust will increase with ease of use, and ease of use will increase usefulness, and then usefulness will increase user attitude positively and motivate them to act positively to use AI chatbot applications in the Sri Lanka government sector. PE ( β = 0.855, CR = 6.22, p< 0.001) has a positive and significant impact on PU, supporting Hypothesis 4. It explains the path between PE and PU. The relation between these two constructs is very strong; it is the core reason for the user’s attitude toward AI chatbot application adoption. PE positively influences the users’ PU; minimizing the technology complexity increases the belief that AI-based applications are efficient to use and helpful for government administration services. TR ( β = 0.247, CR = 1.777, p= 0.076) has a positive impact on AT, though this result is not statistically significant, thus not supporting Hypothesis 5. The relationship between TR and PE is also positive and significant ( β = 0.401, CR = 4.03, p< 0.001), supporting Hypothesis 6. This explains the relationship between perceived ease of use and trust. According to this study, trust is a crucial concept that influences other concepts and influences the choices made by consumers. Risk and trust are inversely correlated; as trust rises, the estimated risk falls. Building trust is the key to boosting confidence in modern technology and its ability to be used more effectively with less effort. Perceived ease of use is a primary component of this model that characterizes the degree of complexity of AI chatbot applications for use in the government sector. With respect to PE, AD ( β = 0.404, CR = 4.829, p< 0.001) has a positive and not significant impact on PE, supporting Hypothesis 7. This outlines the relationship between perceived ease of use and application design and appearance. The results demonstrate that the application design has a favorable impact on PE for the AI chatbot application; a well-designed chatbot application enhances user satisfaction through positive interaction and use. SI ( β = 0.053, CR = 0.56, p= 0.575) has a positive and not satisfactory impact on PU, not supporting Hypothesis 8. However, SI ( β = 0.445, CR = 4.217, p< 0.001) has a positive and significant impact on TR, supporting Hypothesis 9. These results describe the path between social influence and PE and trust. This path shows the positive effect of social influence on PU and trust, which explains that social factors have a relationship with modern technological applications and services (positive or negative) in the government Adm. Sci. 2025,15, 157 21 of 29 sector. The relations and communications between people on social media, in work, in the markets, or any other place can significantly impact and motivate people to trust and use new technological applications in government sector organizations. 4.4. Direct Effect, Indirect Effect, and Total Effect The significance of the mediated effect is accessed by a bootstrapping method. It was employed to derive the direct, indirect, and total effects in this model. The results (Table 8) show that TR indirectly influences PU ( β = 0.343, p< 0.01 ) and BI ( β = 0.18, p< 0.01 ), confirming its mediating role in AI chatbot adoption. Additionally, SI has a strong effect on TR ( β = 0.445, p< 0.01 ) and indirectly influences PU ( β = 0.153, p< 0.01), AT (β= 0.256 , p< 0.01 ), and BI ( β = 0.095, p< 0.01). Furthermore, AD enhances PE ( β = 0.404, p< 0.01 ) and PU ( β = 0.345, p< 0.01 ), which indirectly contribute to attitude formation and adoption intention. These findings highlight that trust, social influence, and application design significantly shape the acceptance of AI chatbots in public administration services in Sri Lanka. Table 8. Results of total, indirect, and direct effect. Path Estimates Total Direct Indirect TR->PE 0.401 0.401 0 TR->PU 0.343 0 0.343 TR->BI 0.180 0 0.180 SI->TR 0.445 0.445 0 SI->PE 0.178 0 0.178 SI->AT 0.256 0 0.256 SI->BI 0.095 0 0.095 AD->PE 0.404 0.404 0 AD->PU 0.345 0 0.345 AD->AT 0.241 0 0.241 AD->BI 0.089 0 0.089 5. Discussion In recent years, the integration of artificial intelligence, particularly chatbot applications, has surged within the government sector, offering innovative solutions for enhancing citizen engagement and streamlining public services. However, the adoption of these technologies has faced significant challenges, as many users exhibit resistance to interacting with AI-driven chatbots. This paper evaluated the usability of chatbot technology and identified the factors influencing user acceptance in a government administration service delivery context-based chatbot application in a Sri Lankan context and designed and validated a new research model (extended TAM) for successful AI technological adoption which can be used for future initiatives in many developing countries. Given the increasing prevalence of AI tools and the limited existing research to guide this inquiry, the development of a new model seeks to provide fresh insights and support the broader acceptance of AI chatbot applications. A survey was conducted among a diverse group of government administration service users, employing the SEM approach to analyze the collected data. In the context of social sciences, these results reaffirm the necessity of integrating technological tools in both the public and private sectors and adjusting to the swift advancements in technology to promote the long-term sustainable adoption of AI technology. However, we contend that developing sustainable AI technological initiatives in the government administration service necessitates more than just implementing the newest technologies; rather, it calls for a thorough and calculated integration that considers social Adm. Sci. 2025,15, 157 22 of 29 factors, application design and appearance, and trust in the solution of challenging issues. These components must be considered by policy professionals who can handle today’s issues, protect the public interest, and continue government organizations’ service delivery to the public by effectively utilizing contemporary technological initiatives. The survey results revealed that several new factors significantly influence users’ behavioral intentions towards AI chatbot application in government administration service delivery. According to research (Matemba & Li,2017), TR factor can motivate individuals to adopt technology. Also, strong partial correlations between risk and acceptance can be demonstrated based on research (Eiser et al.,2006). Similarly, the findings of this study highlight that TR has a strong direct impact on PE, while PE directly impacts PU, which positively impacts user AT and decision making, ultimately leading to a change users’ BIs to an acceptance of AI chatbots in government service delivery. Also, a group of researchers (Chaouali et al.,2016) found that social influence truly affects technology and reflects the degree of faith in it. Similarly, some studies discovered that the social environment and consumer decisions significantly influence user decisions and behaviors (Chaouali et al., 2016;Fulk et al.,1995;Fulk & Yuan,2017;Malhotra & Galletta,1999). Additionally, the results of this study indicate that the new external construct, SI, has a strong impact on TR and plays a crucial role in fostering trust. Respondents largely expressed confidence in their safety and trustworthiness when interacting with these AI-driven systems in government sector in Sri Lanka based on the social recommendations. Also, AD positively influences PE when focused on the adoption of an acceptance of the use of AI chatbot applications in government sector organizations. Therefore, it confirms the importance of application design/appearance and considering the multi-national language environment in Sri Lankan society. Moreover, this research makes a significant contribution by demonstrating that TAM (F. Davis,1985;F. D. Davis,1989) is sufficient to explain how we can extend the model with external factors such as TR, SI, and AD to identify the adoption of the latest technology in different environments. The new research model was built around nine hypotheses and focused on analyzing the relationships between the mentioned external factors and existing TAM core factors. The results prove that most of the hypotheses proposed are evidence of the positive influence of trust, application design and appearance, and social influence on several constructs focused on behavioral intention regarding the acceptance of AI chatbot applications in government administration services for sustainability. However, Hypotheses H3, H5, and H8 were not accepted according to the results of this study. Hypothesis H3 explains the relationship between PE to AT. The technology acceptance model (F. Davis,1985) suggests that PE significantly influences AT towards technology. Therefore, we hypothesized that if a technology is perceived as easy to use, users would develop a more favorable attitude toward adopting it. The failure to prove this correlation may exhibit the nature of the government sector in Sri Lanka, where citizens might be less concerned with perceived ease of use due to a higher degree of trust on chatbots (e.g., accessing concurrent information services). Citizens may prioritize usefulness and trustworthiness over perceived ease of use due. Additionally, many government employees and citizens may already have experience with e-services from the private sector and, as a result, the perceived ease of use due factor might not be as influential on their attitude as originally expected in the Sri Lankan context. Enhancing capabilities/accuracy over ease of use and promoting utilities/abilities rather than ease of use can be introduced as alternative policy measures to enhance AI chatbot adoption in Sri Lanka’s public sector. Similarly, Hypothesis H5 explains the relationship between TR and AT. According to prior research studies, trust in technology acceptance is essential, particularly when related to data privacy and security. It was identified as a fundamental determinant of Adm. Sci. 2025,15, 157 23 of 29 users’ attitudes towards adopting new technologies. However, the results of this study interpret a non-significant relationship between trust and attitude, which could be due to the specific circumstances of Sri Lanka’s e-government environment. In a country where e-government services are still in the process of being integrated and treated, citizens may have developed practical attitudes toward the new technology, focusing more on accessibility and functionality than on trust factors. The reputation and history of service delivery of government organizations may also underestimate the role of trust in influencing citizens’ attitudes towards e-government solution acceptance. Also, some alternative policy measures can be taken based on trust to enhance AI chatbot adoption. Enhancing transparency and establishing strong data security must be taken with those policy measures to build citizens’ trust. Finally, Hypothesis H8 describes the relationship between SI and PU. SI is a widely recognized factor in technology acceptance models. We hypothesized that social influence (e.g., recommendations from colleagues, elders, and leaders) would positively affect individuals’ perceptions of the usefulness of AI chatbots in government administration services. The lack of support for this hypothesis indicates that SI may have a lower direct impact on perceived usefulness in the context of government service adoption in Sri Lanka. This might happen because perceived usefulness in public sector technology adoption is more likely influenced by individual user experiences and task-oriented needs rather than external social pressures. From the perspective of Sri Lanka’s e-government, users might focus on the practical benefits of using AI chatbots such as ease of access and speedy service delivery rather than how others perceive these systems. Additionally, government employees and citizens might have minimal levels of perceived social influence to adopt new technologies such as AI chatbots, especially if they are still relatively modern and not extensively used so far. Some policy measures can be taken in this scenario, such as focusing on performance/benefits over the social popularity of AI chatbot applications. 6. Conclusions 6.1. Research Implications As a developing country, the government of Sri Lanka and government policy makers should consider the results achieved in this study for the future sustainability in AI technological initiatives in government administration services. Initially, all AI-based digital government initiatives must be aligned with the long-term sustainability goals of Sri Lanka. The implementation of modern technological movements like AI-based chatbot applications should take consumers’ trust into consideration, supported by government regulation and customer experience. This means that the government must prioritize customer trust in all digital government applications. To build up people’s trust in digital interactions, governments may provide transparency by describing how chatbots operate, what data are gathered and protected, and how user privacy is maintained. The Sri Lankan government may implement strong cybersecurity measures to support and regulate the use of any AI-based applications and initiate suitable laws and regulations to control the usage, which will ultimately help to build user trust. In this scenario, the government can organize public awareness programs on such new digital technologies to emphasize their security and reliability regarding sensitive public data. Also, regular auditing methods, independent reviews, and public feedback systems can be implemented to ensure that AI chatbot systems remain ethical and effective at processing sensitive public related data, while preserving public trust. Secondly, enhancing application design and appearance can improve user familiarity and adoption rates significantly. The government should make sure that AI chatbots have a simple, user friendly design with comfortable navigation. As described previously, to Adm. Sci. 2025,15, 157 24 of 29 accommodate varied populations, accessibility features such as multilingual support in voice assistance and important possibilities for disabled users must be integrated. Also, consistency among different platforms should be maintained, especially on mobile applications, government websites and information portals, and social media networks, to support higher usability and acceptability of AI chatbot systems. Finally, based on the outcomes of social influence, the government may take steps to promote AI chatbots actively through digital awareness promotions. Popular influencers and well-known government policy makers and officers can make endorsements on government AI solutions to build and enhance social confidence ultimately. Presenting real-world accomplishments can boost credibility and inspire wider AI solution adoption. Public engagement measures, such as dynamic chatbot exhibitions and incentives to encourage early adopters, can help to increase user interest. Governments can speed up the transition to AI-powered public service engagements by cultivating a culture that normalizes and encourages chatbot use in e-government services. These recommendations can help guide policymakers and application designers in developing a strong, protected, and trustworthy framework for AI adoption in government services, supporting the sustainability of digital government initiatives in Sri Lanka. 6.2. Limitations and Future Research This study is only designed to measure the intention of users, not the actual usage rate of such modern technology. This provides direction for future research to use actual usage data to support our findings. To strengthen the validity of this study’s findings, future research should move beyond user perception survey data and incorporate real-world adoption metrics. In that scenario, future researchers should monitor the usage information of AI chatbots in government portals over a reasonable time duration (preferably six months to one year). Then, pre-adoption expectations (survey data on user expectations) should be compared with actual post-adoption behaviors (actual usage statistics) to obtain validated conclusions. Also, it is recommended to check the usage patterns of different AI chatbot versions by different solution interfaces. This can be helpful to check the user behavior based on application design implications. Furthermore, it is important to note that the results of the study can be improved further by increasing the sample size for the users of the government administration services in Sri Lanka. Author Contributions: Conceptualization, Y.A.; methodology, A.S.R.; software, A.S.R.; validation, Y.A. and T.D.H.N.N.; formal analysis, A.S.R.; investigation, A.S.R.; resources, A.S.R.; data curation, A.S.R.; writing—original draft preparation, A.S.R.; writing—review and editing, T.D.H.N.N.; visualization, A.S.R.; supervision, Y.A; project administration, Y.A.; funding acquisition, Y.A. All authors have read and agreed to the published version of the manuscript. Funding: This research received no external funding. Institutional Review Board Statement: Ethical review and approval were waived for this study due to Hanyang University Research Ethics Policy exemptions (https://irb.hanyang.ac.kr/02 _ guide/ guide02.html, accessed on 13 March 2025). Informed Consent Statement: Informed consent was obtained from all subjects involved in the study. Data Availability Statement: The data presented in this study are available on request from the corresponding author due to privacy and ethical reasons. Conflicts of Interest: The authors declare no conflict of interest.