Special issue: Functionalized and smart asphalt mixtures via the modification/application of nano/micromaterials

Citation: Segundo, I.R.; Freitas, E.; Carneiro, J.O. Special Issue: Functionalized and Smart Asphalt Mixtures via the Modification/ Application of Nano/Micromaterials. Coatings 2022,12, 1533. https:// doi.org/10.3390/coatings12101533 Received: 29 September 2022 Accepted: 11 October 2022 Published: 13 October 2022 Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. Copyright: © 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/). coatings Editorial Special Issue: Functionalized and Smart Asphalt Mixtures via the Modification/Application of Nano/Micromaterials Iran Rocha Segundo 1,2,* , Elisabete Freitas 2,* and Joaquim O. Carneiro 1,* 1Centre of Physics of Minho and Porto Universities (CF-UM-UP), Azurém Campus, University of Minho, 4800-058 Guimarães, Portugal 2ISISE, Department of Civil Engineering, University of Minho, 4800-058 Guimarães, Portugal * Correspondence: [email protected] (I.R.S.); [email protected] (E.F.); [email protected] (J.O.C.) Asphalt pavements are designed to resist weathering and road traffic while guaranteeing safe and comfortable driving conditions at low cost and with minimal environmental impact [ 1 ]. When a material reacts to an external stimulus and presents additional abilities, it is considered smart and multifunctional [ 1 , 2 ]. Functionalization consists of developing a new material capability. Several capabilities have been applied to asphalt mixtures, such as photocatalytic [ 3 , 4 ], superhydrophobic [ 5 – 7 ], self-healing [ 8 – 10 ], de-icing/antiicing [ 11 , 12 ], self-cleaning [ 13 – 15 ], thermochromic [ 16 – 18 ], and latent heat thermal energy storage [19–21] . These abilities are developed mainly by employing nano/microparticles, phase change materials (PCMs), fibers, and dyes [ 1 ]. Additionally, there is interest in converting ambient energy into other useful forms of energy [ 22 ], which will offer new functionalities. In addition to the new capabilities, the functionalization of asphalt mixtures may improve the mechanical properties or aging resistance. Photocatalytic capability has been one of the most investigated topics with regard to the functionalization of asphalt pavements, as it is related to benefits regarding road safety (by the photodegradation of organic compounds, such as oils and greases, adsorbed on the surface), in addition to the environment and social benefits through the degradation of air pollutants [ 13 , 23 ]. Among several pollutants, photocatalytic surfaces degrade NO x , SO 2 , and volatile organic compounds [ 3 , 24 , 25 ]. During the functionalization process of asphalt mixtures, the main application processes of the nano/micromaterials are spraying or spreading the nanomaterials onto the surface as a coating, and their incorporation into the whole layer via bulk incorporation during the asphalt mixing or inserting the particles into the asphalt binder (asphalt binder modification) [26]. In winter, snow and ice formation on roads increase the number of accidents due to the reduced friction between tires and pavement [ 5 , 27 ]. To mitigate this problem, it is recommended to use deicing agents and conductive materials in the asphalt mixtures [ 27 – 29 ]. In the first case, the ice and snow can melt due to a chemical process [ 30 , 31 ], while the second requires a microwave machine [ 11 ]. Another way to mitigate the problem is by repelling the water from the surface; thus, the ice/snow formation is avoided. Superhydrophobic asphalt mixtures have this capability. This technique provides safer roads during rainy periods and has an additional self-cleaning effect as the dirt particles over the surface are removed [5,7,32,33]. The self-cleaning capability is achieved together with three surface capabilities: (i) superhydrophobic: based on the effect of the lotus flower, water presents a form of a sphere, rolling on the surface and carrying the deposited dust. (ii) superhydrophilic: water spreads on the surface, which is washed in rainy periods, (iii) photocatalytic: related to the selfcleaning effect, photocatalytic materials degrade organic compounds over their surface [ 1 ]. In all cases, removing particles and degrading adsorbed compounds increases road safety by increasing friction. Another type of asphalt capability that promotes safer roads and materials strength, reduces aging, and mitigates the Urban Heat Island (UHI) is the thermochromic capability [ 16 – 18 , 34 ]. The changing color of the surface can warn the drivers if there is ice, one of Coatings 2022,12, 1533. https://doi.org/10.3390/coatings12101533 https://www.mdpi.com/journal/coatings Coatings 2022,12, 1533 2 of 3 the worst road situations due to the low temperature. It can increase light reflection and conversely reduce sunlight absorption, as the black color of asphalt materials increases the surface temperature. With the reduction in the temperature, it is possible to improve the mechanical performance and avoid the UHI. With the development of latent thermal energy storage capability, it is also possible to mitigate the UHI. Reducing the magnitude of temperature fluctuations also benefits the mechanical properties of the asphalt mixtures, preventing rutting and avoiding thermal cracks. For this purpose, Phase Change Materials (PCM) have been applied to asphalt mixtures through bulk incorporation (a dry process) or asphalt binder modification (a wet process) [19–21]. The cracks in the asphalt mixtures are among its most critical degradations. Using some materials from a different point of view makes it possible to develop the selfhealing capability to close microcracks. This capability is achieved by incorporating conductive materials, microcapsules with high content of maltenes, nanoparticles, or even ionomers [1,9,35–37] . This can provide a longer lifetime for the pavements, causing less emission of CO2, consumption for paving, and road traffic disruption. When energy harvesting knowledge is applied to asphalt mixtures, road pavements can convert significant amounts of ambient energy into other useful forms of energy. Pavements are continuously submitted to solar radiation and vehicle loads, from which it is possible to convert energy into electrical energy. The solar radiation and the mechanical energy can be harvested by photovoltaic cells and piezoelectric devices, respectively [22,38,39]. Author Contributions: Conceptualization, I.R.S. and J.O.C.; methodology, I.R.S., E.F. and J.O.C.; validation, J.O.C.; formal analysis, I.R.S. and J.O.C.; investigation, I.R.S., E.F. and J.O.C.; resources, E.F. and J.O.C.; data curation, E.F.; writing—original draft preparation, I.R.S.; writing—review and editing, E.F. and J.O.C.; visualization, I.R.S. and J.O.C.; supervision, J.O.C.; project administration, E.F. and J.O.C.; funding acquisition, E.F. and J.O.C. All authors have read and agreed to the published version of the manuscript. Funding: This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UIDB/04650/2020 and UIDB/04029/2020 and also under the projects of MicroCoolPav project EXPL/EQU-EQU/1110/2021, and NanoAir project PTDC/FISMAC/6606/2020. Conflicts of Interest: The authors declare no conflict of interest. References 1. Segundo, I.R.; Freitas, E.; Branco, V.T.F.C.; Landi, S.; Costa, M.F.; Carneiro, J.O. Review and analysis of advances in functionalized, smart, and multifunctional asphalt mixtures. Renew. Sustain. Energy Rev. 2021,151, 111552. [CrossRef] 2. Han, B.; Wang, Y.; Dong, S.; Zhang, L.; Ding, S. Smart concretes and structures: A review. J. Intell. Mater. Syst. Struct. 2015 ,26, 1303–1345. [CrossRef] 3. Wang, D.; Leng, Z.; Hüben, M.; Oeser, M.; Steinauer, B. Photocatalytic pavements with epoxy-bonded TiO 2 -containing spreading material. Constr. Build. Mater. 2016,107, 44–51. [CrossRef] 4. Liu, W.; Wang, S.; Zhang, J.; Fan, J. Photocatalytic degradation of vehicle exhausts on asphalt pavement by TiO 2 /rubber composite structure. Constr. Build. Mater. 2015,81, 224–232. [CrossRef] 5. Arabzadeh, A.; Ceylan, H.; Kim, S.; Gopalakrishnan, K.; Sassani, A. Superhydrophobic coatings on asphalt concrete surfaces: Toward smart solutions for winter pavement maintenance. Transp. Res. Rec. 2016,2551, 10–17. [CrossRef] 6. Peng, C.; Zhang, H.; You, Z.; Xu, F.; Jiang, G.; Lv, S.; Zhang, R. Preparation and anti-icing properties of a superhydrophobic silicone coating on asphalt mixture. Constr. Build. Mater. 2018,189, 227–235. [CrossRef] 7. Wu, C.; Li, L.; Wang, W.; Gu, Z.; Li, H.; Lin, X.; Wang, H. Fabrication and Evaluation of Nano-TiO2 Superhydrophobic Coating on Asphalt Pavement. Nanomaterials 2021,11, 1–19. 8. Liang, B.; Lan, F.; Shi, K.; Qian, G.; Liu, Z.; Zheng, J. Review on the self-healing of asphalt materials: Mechanism, affecting factors, assessments and improvements. Constr. Build. Mater. 2021,266, 120453. [CrossRef] 9. García, Á.; Schlangen, E.; Ven De, M.; Bochove, G. Van Optimization of composition and mixing process of a self-healing porous asphalt. Constr. Build. Mater. 2012,30, 59–65. [CrossRef] 10. Trigos, L.; Gallego, J.; Ignacio, J.; Picado-santos, L. Dielectric properties versus microwave heating susceptibility of aggregates for self-healing asphalt mixtures. Constr. Build. Mater. 2021,293, 123475. [CrossRef] Coatings 2022,12, 1533 3 of 3 11. Gao, J.; Sha, A.; Wang, Z.; Tong, Z.; Liu, Z. Utilization of steel slag as aggregate in asphalt mixtures for microwave deicing. J. Clean. Prod. 2017,152, 429–442. [CrossRef] 12. Sun, Y.; Wu, S.; Liu, Q.; Hu, J.; Yuan, Y.; Ye, Q. Snow and Ice Melting Properties of Self-healing Asphalt Mixtures with Induction Heating and Microwave Heating. Appl. Therm. Eng. 2017,129, 871–883. [CrossRef] 13. Carneiro, J.; Azevedo, S.; Teixeira, V.; Fernandes, F.; Freitas, E.; Silva, H.; Oliveira, J. Development of photocatalytic asphalt mixtures by the deposition and volumetric incorporation of TiO2 nanoparticles. Constr. Build. Mater. 2013 ,38, 594–601. [CrossRef] 14. Rocha Segundo, I.; Ferreira, C.; Freitas, E.F.; Carneiro, J.O.; Fernandes, F.; Landi Júnior, S.; Costa, M.F. Assessment of photocatalytic, superhydrophobic and self-cleaning properties on hot mix asphalts coated with TiO2 and/or ZnO aqueous solutions. Constr. Build. Mater. 2018,166, 36–44. [CrossRef] 15. Rocha Segundo, I.; Landi, S., Jr.; Oliveira, S.; Freitas, E.; Costa, M.F.; Carneiro, J. Photocatalytic asphalt mixtures: Semiconductors’ impact in skid resistance and texture. Road Mater. Pavement Des. 2019,20, S578–S589. [CrossRef] 16. Hu, J.; Yu, X. Performance evaluation of solar-responsive asphalt mixture with thermochromic materials and nano-TiO 2 scatterers. Constr. Build. Mater. 2020,247, 118605. [CrossRef] 17. Zhang, H.; Chen, Z.; Xu, G.; Shi, C. Physical, rheological and chemical characterization of aging behaviors of thermochromic asphalt binder. Fuel 2018,211, 850–858. [CrossRef] 18. Hu, J.; Asce, S.M.; Yu, X.B.; Asce, M. Reflectance Spectra of Thermochromic Asphalt Binder: Characterization and Optical Mixing Model. J. Mater. Civ. Eng. 2015,28, 04015121. [CrossRef] 19. Kalnæs, S.E.; Jelle, B.P. Phase change materials and products for building applications: A state-of-the-art review and future research opportunities. Energy Build. 2015,94, 150–176. [CrossRef] 20. Anupam, B.R.; Sahoo, U.C.; Rath, P. Phase change materials for pavement applications: A review. Constr. Build. Mater. 2020 ,247, 118553. [CrossRef] 21. MeiZhu, C.; Jing, H.; Wu, S.; Lu, W.; Xu, G. Optimization of Phase Change Materials Used in Asphalt Pavement to Prevent Rutting. Adv. Mater. Res. 2011,219–220, 1375–1378. [CrossRef] 22. Gholikhani, M.; Roshani, H.; Dessouky, S.; Papagiannakis, A.T. A critical review of roadway energy harvesting technologies. Appl. Energy 2020,261, 114388. [CrossRef] 23. Cao, X.; Yang, X.; Li, H.; Huang, W.; Liu, X. Investigation of Ce-TiO 2 photocatalyst and its application in asphaltbased specimens for NO degradation. Constr. Build. Mater. 2017,148, 824–832. [CrossRef] 24. Hassan, M.; Mohammad, L.N.; Asadi, S.; Dylla, H.; Cooper, S. Sustainable Photocatalytic Asphalt Pavements for Mitigation of Nitrogen Oxide and Sulfur Dioxide Vehicle Emissions. J. Mater. Civ. Eng. 2012,25, 365–371. [CrossRef] 25. Hassan, M.M.; Dylla, H.; Mohammad, L.N.; Rupnow, T. Evaluation of the durability of titanium dioxide photocatalyst coating for concrete pavement. Constr. Build. Mater. 2010,24, 1456–1461. [CrossRef] 26. Rocha Segundo, I.; Freitas, E.; Landi, S., Jr.; Costa, M.F.M.; Carneiro, J.O. Smart, Photocatalytic and Self-Cleaning Asphalt Mixtures: A Literature Review. Coatings 2019,9, 696. [CrossRef] 27. Shan, L.; Li, Z.; Tian, D.; Tan, Y. Effect of anti-icing additives on the stability of emulsified asphalt binders. Constr. Build. Mater. 2021,275, 121951. [CrossRef] 28. Ma, T.; Geng, L.; Ding, X.; Zhang, D.; Huang, X. Experimental study of deicing asphalt mixture with anti-icing additives. Constr. Build. Mater. 2016,127, 653–662. [CrossRef] 29. Pan, P.; Wu, S.; Xiao, F.; Pang, L.; Xiao, Y. Conductive asphalt concrete: A review on structure design, performance, and practical applications. J. Intell. Mater. Syst. Struct. 2015,26, 755–769. [CrossRef] 30. Han, S.; Yao, T.; Yang, X. Preparation and anti-icing properties of a hydrophobic emulsified asphalt coating. Constr. Build. Mater. 2019,220, 214–227. [CrossRef] 31. Han, S.; Yin, Y.; Peng, B.; Dong, S.; Wu, S. Experimental Study of Asphalt Mixture with Acetate Anti-Icing Filler. Arab. J. Sci. Eng. 2022,47, 4225–4237. [CrossRef] 32. Li, W.; Wang, Y.; Feng, Y.; Wang, Q.; Xu, X.; Li, G.; Dong, G.; Jing, S.; Chen, E.; Fan, X.; et al. A Cost-Effective Method for Preparing Robust and Conductive Superhydrophobic Coatings Based on Asphalt. Scanning 2020,2020, 5642124. [CrossRef] [PubMed] 33. Lee, E.; Kim, D.H. Simple fabrication of asphalt-based superhydrophobic surface with controllable wetting transition from Cassie-Baxter to Wenzel wetting state. Colloids Surf. A Physicochem. Eng. Asp. 2021,625, 126927. [CrossRef] 34. Yu, B.; Peng, W.; Liu, J.; Zhang, J.; Li, W.; Hong, Q. Research on the performance of temperature responsive asphalt mixture with thermochromic material. Road Mater. Pavement Des. 2020,23, 713–724. [CrossRef] 35. Agzenai, Y.; Pozuelo, J.; Sanz, J.; Perez, I.; Baselga, J. Advanced self-healing asphalt composites in the pavement performance field: Mechanisms at the nano level and new repairing methodologies. Recent Pat. Nanotechnol. 2015,9, 43–50. [CrossRef] [PubMed] 36. Shi, Y. High Temperature Shape Memory Polymers & Ionomer Modified Asphalts; The University of Akron: Akron, OH, USA, 2013. 37. Chung, K.; Lee, S.; Park, M.; Yoo, P.; Hong, Y. Preparation and characterization of microcapsule-containing self-healing asphalt. J. Ind. Eng. Chem. 2015,29, 330–337. [CrossRef] 38. Papagiannakis, A.T.; Dessouky, S.; Montoya, A.; Roshani, H. Energy Harvesting from Roadways. Procedia Comput. Sci. 2016 ,83, 758–765. [CrossRef] 39. Wang, H.; Jasim, A.; Chen, X. Energy harvesting technologies in roadway and bridge for different applications—A comprehensive review. Appl. Energy 2018,212, 1083–1094. [CrossRef]