Functional group directed C-H borylation

This journal is ©The Royal Society of Chemistry 2014 Chem.Soc.Rev.,2014, 43,3229--3243 | 3229 Cite this: Chem. Soc. Rev., 2014, 43, 3229 Functional group directed C–H borylation† A. Ros,* a R. Ferna ´ndez* b and J. M. Lassaletta* a The direct borylation of hydrocarbons via C–H activation has reached an impressive level of sophistication and efficiency, emerging as a fundamental tool in synthesis because of the versatility offered by organoboron compounds. As a remarkable particularity, the catalytic systems originally developed for these reactions are relatively insensitive to directing effects, and the regioselectivity of the borylations is typically governed by steric factors. Likely stimulated by the great synthetic potential of the expected functionalised organoboranes, however, many groups have recently focused on the development of complementary strategies for directed, site-selective borylation reactions where a directing group controls the course of the reaction. In this tutorial review, the different strategies and findings related to the development of these directed borylation reactions via C(sp 2 )–H or C(sp 3 )–H activation will be summarized and discussed. Key learning points (1) Transition-metal catalysis (2) C–H bond activation (3) Directing groups (4) Ligand design (5) Atom economy 1. Introduction Direct CH activation/functionalization of hydrocarbons has evolved as one of the most fundamental tools in modern synthetic chemistry, because it enables atom-economic, straightforward routes to achieve functionalised value-added products and intermediates. One of the most efficient reactions in this field is the direct borylation of hydrocarbons including arenes, alkenes and alkanes, which, in combination with cross-coupling methodologies, represents a powerful methodology for the functionalization of raw materials (Scheme 1). 1 Until recently, the regioselectivity in most of the catalytic processes developed for the borylation of alkanes and arenes was mainly governed by steric factors, 2 and this circumstance has been exploited by using the direct borylation as a complementary tool to the well established directed ortho metalation (DoM) methodologies. 3 It is clear, however, that much of the interest in the direct borylation of hydrocarbons relies on the advantages that organoboron compounds offer over more basic (or more toxic) aryl/alkyl metals, not only because of their higher versatility in cross-coupling applications, but also because of the specific transformations developed for organoboranes, including oxidation, halogenation, amination, etherification (known as the Chan–Lam–Evans 4 reaction), etc. 5 In fact, the synthesis of borylated products has been accomplished in an indirect way via a directed metalation/borylation (transmetalation) sequence. 6 As a consequence, the development of site-selective directed borylations (Scheme 2) provides a very attractive alternative to the directed ortho metalation (DoM) methodologies, not in terms of complementarity but because of the distinct synthetic potential Scheme 1 Functionalization of hydrocarbons via direct borylation/crosscoupling strategies. a Instituto de Investigaciones Quı ´micas (CSIC-US), Ame ´rico Vespucio 49, E-41092 Sevilla, Spain. E-mail: [email protected]; Fax: +34 954460565; Tel: +34 954489563 b Departamento de Quı ´mica Orga ´nica, Universidad de Sevilla, C/ Prof. Garcı ´a Gonza ´lez, 1, 41012 Sevilla, Spain. E-mail: ff[email protected]; Fax: +34 954624960; Tel: +34 954551518 †Dedicated to Professor Ernesto Carmona on the occasion of his 65th birthday. Received 18th November 2013 DOI: 10.1039/c3cs60418g www.rsc.org/csr Chem Soc Rev TUTORIAL REVIEW Published on 20 February 2014. Downloaded by Centro de Investigaciones Cientificas Isla de la Cartuja (CICIC) on 24/06/2014 10:21:16. View Article Online View Journal | View Issue 3230 |Chem.Soc.Rev.,2014, 43,3229--3243 This journal is ©The Royal Society of Chemistry 2014 (much broader functional group compatibility, tolerance to oxygen, protic media, etc.) of organoboranes. An additional advantage of these methods is that cryogenic cooling can be avoided, eventually reducing energy costs in large scale reactions. Consequently, the development of methods and strategies toward this goal has received considerable attention in the last few years. The aim of this review is to offer an overview of the recent advances in this field. Indirect approaches based on transmetalation of boron will not be discussed herein. 2. Directed borylations via C(sp 2 )–H activation As is the case in many other catalytic C–H functionalizations, the directed borylation via C–H activation was first developed in Scheme 2 Functionalization of hydrocarbons via direct borylation/crosscoupling strategies. Scheme 3 Analysis of regioselectivity in Ir-catalysed borylations. R. Ferna ´ndez Rosario Ferna ´ndez studied chemistry at the University of Seville and received both her BS degree (1980) and her PhD degree (1985) under the supervision of Prof. Antonio Go ´mez Sa ´nchez. She was a NATO postdoctoral fellow at the University of Paris-Sud (Orsay, France) in the laboratory of Prof. Serge David from 1986 to 1987. In 1987 she returned to the University of Seville, where she was promoted to Associate Professor. In 2008 she became a Full Prof. at the same University. Her current research interests include asymmetric synthesis and enantioselective catalysis, in both aspects, asymmetric metal catalysis and organocatalysis. J. M. Lassaletta Jose ´Marı ´a Lassaletta received his BS and his PhD in 1990 under the supervision of Prof. Go ´mez-Guille ´n at the University of Seville. After a postdoctoral stage in the ‘Instituto de la Grasa y sus Derivados’ (CSIC, Seville) he joined the group of Professor Richard R. Schmidt (U. Konstanz, Germany). In 1995 he moved to the Instituto de Investigaciones Quı ´micas (CSIC, Seville), where he was promoted to Tenured Scientist in 1996, Research Scientist in 2005 and Research Professor in 2009. He is currently interested in the development of synthetic methodologies, cross-coupling and C–H activation strategies, and ligand design, with emphasis on hydrazones and N-heterocyclic carbenes, and asymmetric organocatalysis. A. Ros Abel Ros studied at the University of Seville obtaining his BS (2001) and PhD degrees in Chemistry (2006), under the supervision of Prof. R. Ferna ´ndez and Dr J. M. Lassaletta. After a postdoctoral period working for Bayer CropScience (2006–2007), he joined the group of Prof. Aggarwal (U. Bristol, UK) as an IEF- Marie Curie fellow (2008–2010). In 2010 he joined the group of Dr Jose ´M. Lassaletta at Instituto de Investigaciones Quı ´micas as an ERC-Marie Curie fellow and, since 2012, he has been a JAE- postdoctoral researcher. He is currently interested in metalcatalyzed asymmetric methodologies, especially the asymmetric Suzuki–Miyaura reaction and C–H bond functionalizations. Tutorial Review Chem Soc Rev Published on 20 February 2014. Downloaded by Centro de Investigaciones Cientificas Isla de la Cartuja (CICIC) on 24/06/2014 10:21:16. View Article Online This journal is ©The Royal Society of Chemistry 2014 Chem.Soc.Rev.,2014, 43,3229--3243 | 3231 arenes and heteroarenes. The different approaches have been classified by the transition metal used. 2.1. Ir-catalysed borylations It has been demonstrated that direct borylation catalysed by the 1 : 2 [Ir(m-X)(cod)] 2 /dtbpy (X = Cl, OMe) system takes place through a [Ir(dtbpy)(Bpin) 3 ] 16e  catalytically active species A. 7,8 The lack of sensitivity of this process towards any directing effects by basic functionalities in the substrate can be arguably attributed to the lack of additional vacant coordination sites in the complex Bformed upon coordination of directing functionalities. In this scenario, the reaction can only proceed via intermediate C, and steric factors represent the main contribution to regioselectivity (Scheme 3). In order to enable directing group effects in these reactions, different strategies based on catalyst or substrate modification have been recently developed, affording attractive site-selective borylation methodologies for the synthesis of ortho-substituted arylboronic esters and related borylated compounds. Three types of approaches have been designed, with strategies comprising: 2.1.1. Chelate-directed borylations. The first strategy consists of the development of borylation procedures enabled by initial coordination of a basic functionality (the more classical type of directing groups) to the Ir catalyst. In this case, modification of the ligand is the key to facilitate the generation of an additional vacant coordination site in the catalyst– substrate complex. Ishiyama, Miyaura et al. developed a catalytic system based on the use of [Ir(m-OMe)(cod)] 2 as the iridium source, and an electron-poor phosphine such as P[3,5-(CF 3 ) 2 C 6 H 3 ] 3 as the ligand, which was able to catalyse the site-selective borylation of several substrates containing oxygen-based directing groups. This method was first applied to the ortho-regioselective borylation of benzoates (Scheme 4). 9 Using B 2 pin 2 as the reagent, these reactions take place in octane at 80 1C for 16 h, leading to the corresponding products in high yields and with complete regioselectivity, although a considerable excess of arene (5 eq.) is needed to avoid partial ortho,ortho0-diborylations. The reactions tolerate the use of methyl, ethyl, isopropyl and tert-butyl esters as directing groups, while being suitable for substrates possessing electron-donating or electron-withdrawing functional groups. The methodology has also been extended to the borylation of aryl ketones such as acetophenone, but a modest 56% yield of the ortho-borylated product was attained in this case. 10 The substitution of the phosphine ligand by AsPh 3 , however, increases the catalyst activity, so yields higher than 100% based on the B 2 pin 2 reagent were observed.‡The reactions take place at 120 1C for 16 h, with a broad family of ketones containing different functional groups, to give the corresponding orthoborylated products in high GC yields. A drop in the yield of ca. 50% was observed after bulb-to-bulb distillation. The catalytic system 2 : 1 AsPh 3 –[Ir(m-OMe)(cod)] 2 also works for the borylation of C–H bonds of non-aromatic systems such as the vinylic bposition of a,b-unsaturated esters. 11 Thus, 1-cycloalkene- carboxylates can be borylated at the sp 2 carbon with total regioselectivity affording the corresponding borylated products in moderate to excellent 20–96% yields. This borylation reaction is compatible with the presence of different groups in the ester moiety. It is noteworthy that the phenyl group, which should be borylated under the Ir-catalysed borylation conditions, remains unmodified after the reaction. A different approach toward directed, site-selective borylations was recently reported by Sawamura et al. 12 In this case, a solid-supported monophosphine–Ir system, Silica-SMAP–Ir, was used as a suitable catalyst for the directed ortho-borylation of functionalised arenes in a very efficient manner. This reaction is successful with a range of functionalised arenes with different oxygenated directing groups, such as benzoates, benzamides, arylsulfonates, benzyl acetals, benzyl methoxymethylethers, leading to the corresponding borylated products with complete ortho-regioselectivity and good to excellent yields (based on B 2 pin 2 using a 2 : 1 substrate-B 2 pin 2 ratio) in most cases (Scheme 5). It is noteworthy that even the chlorine atom of aryl chlorides can behave as a directing group, though the ortho/para selectivity (92 : 8 for the unsubstituted chlorobenzene) is not perfect in this case. Immobilization of the phosphine ligand in the silica support proved to be essential, as the analogue borylation performed in homogeneous media using [Ir(m-OMe)(cod)] 2 and monomeric Ph-SMAP (0.5 mol% Ir, 1 : 1 or 1:2 Ir/P) afforded only trace conversion at 25 1C. No reaction was observed with other phosphines such as 4-CF 3 -Ph-SMAP, PPh 3 ,P(tBu) 3 ,PCy 3 , and PMe 3 (using 1 : 1 or 1 : 2 Ir/P ratios) under the same reaction conditions. Presumably, the supported catalyst assists the formation of 14-electron intermediates necessary for the successive coordination/CH activation of the substrate. Unfortunately, this heterogeneous catalyst cannot be recovered for recycling. Scheme 4 Oxygen-directed Ir-catalysed borylations. ‡Yields higher than 100% are calculated on B 2 pin 2 (limiting reagent) and indicate that the catalyst can also use the HBpin generated in the initial reaction as a boron source after all the B 2 pin 2 is consumed. Chem Soc Rev Tutorial Review Published on 20 February 2014. Downloaded by Centro de Investigaciones Cientificas Isla de la Cartuja (CICIC) on 24/06/2014 10:21:16. View Article Online 3232 |Chem.Soc.Rev.,2014, 43,3229--3243 This journal is ©The Royal Society of Chemistry 2014 This methodology was further extended to phenol derivatives bearing oxygenated protecting/directing groups such as carbamates, carbonates, phosphorodiamides and sulfonates 13 (Scheme 6). All these groups provide complete ortho-regioselectivity in the borylation reaction with B 2 pin 2 , but moderate to good yields are achieved only with carbamates. Finally, the method has also been applied for the site-selective borylation of heteroarenes including thiophene, pyrrole, furan, benzothiophene, benzofuran, and indole derivatives, using in all cases the 2-methoxycarbonyl directing group. In the case of thiophenes and furans, however, minor amounts of regioisomers resulting from the borylation at position 5werealsoobserved. 14 With the exception of carbazole, borylation takes place in the heterocycle at the vicinal position to the directing group. Interestingly, in the case of 2-methoxycarbonylindoles, the borylation at position 3 provides a complementary regioselectivity to the previously reported method 15 where the borylation takes place at the 7-position (vide infra). The methodologies described above provide satisfactory solutions for the directed borylation of a wide range of arenes, heteroarenes and alkenes, but are limited to oxygenated directing groups, and do not work when nitrogen-based directing groups are used. An early report by Maleczka, Smith and co-workers on the borylation of 2-substituted indoles, appears to be an exception. 15 Using the [Ir(m-OMe)(cod)] 2 /dtbpy catalytic system, these compounds yield selective borylation at the 7-position, which, as mentioned above, is complementary to the selectivity achieved with silica-supported SMAP–Ir. 14 Although the mechanism remains unclear, control experiments and labelling studies performed so far support a mechanism where N-chelation to the iridium center (or the boron atom of a boryl ligand) directs the borylation (Scheme 7). The observed selectivity is also consistent with an alternative mechanism involving H-bonding of the NH proton to an O atom of the boryl ligands in the catalyst (vide infra), but a similar regioselectivity observed for benzofuran suggests that such an interaction is not a requisite. As a second exception, Steel, Marder, Sawamura and co-workers have recently reported on the C(8)-selective borylation of quinolines using the previously mentioned Silica-SMAP–Ir system (Scheme 8). 16 The development of a more general approach for the nitrogendirected Ir-catalyzed arene ortho-borylations was recently reported by us. 17 We envisaged that replacement of the dtbpy ligand in complex B(Scheme 2) by a hemilabile N,Nligand should facilitate the temporary generation of a coordinatively unsaturated intermediate III from the established catalytic species Ivia complex II. This complex III is preorganized for the intramolecular activation of C(ortho)–H bonds (-IV), from which reductive elimination (-V) and re-coordination of the hemilabile ligand (-VI)leadto the product and regenerate the catalyst Iafter reaction with B 2 pin 2 (Scheme 9). In particular, picolinaldehyde N,N-dibenzylhydrazone L1 combined with [Ir(m-OMe)(cod)] 2 proved to be a very efficient ligand for the borylation of 1-naphthylisoquinolines and 2-arylpyridines with B 2 pin 2 under mild conditions. Two types of products were observed, depending on the steric hindrance around the biaryl axis. Thus, X-ray diffraction and NMR data for hindered products revealed no internal N–B interactions, and Scheme 5 Oxygen-directed borylations with Ir-supported catalysts. Scheme 6 Oxygen-directed borylations with Ir-supported catalysts. Scheme 7 Selective borylation of 2-substituted indoles. Scheme 8 Selective borylation of quinolines. Tutorial Review Chem Soc Rev Published on 20 February 2014. Downloaded by Centro de Investigaciones Cientificas Isla de la Cartuja (CICIC) on 24/06/2014 10:21:16. View Article Online This journal is ©The Royal Society of Chemistry 2014 Chem.Soc.Rev.,2014, 43,3229--3243 | 3233 the (hetero)aromatic rings arrange in a perpendicular fashion. On the other hand, less hindered products present intramolecular N–B bonds in planar structures (Scheme 10). This methodology has been applied to the preparation of BAI (borylated aryl isoquinolines) dyes as a new class of fluorophores with potential as ion-triggered molecular switches (Fig. 1). 18 After introduction of an additional 4-methylpiperazin-1-yl group, these compounds also appear as interesting platforms for the design of multi-level logic switches as a consequence of the observed off–on–off ternary and quaternary responses to orthogonal protonation. 19 The reaction has also been extended to the site-selective orthoborylation of aromatic N,N-dimethylhydrazones (Scheme 11, method A). 17 The reaction proceeds efficiently for derivatives carrying electron-withdrawing or donating substituents at any position of the aromatic ring, and allowed clean monoborylations of C-6 unsubstituted substrates. In order to increase the activity of the catalyst, the original picoline dibenzylhydrazone ligand L1 was modified by the introduction of electron-donating groups (NMe 2 , t Bu) at the 4-position of the pyridine ring. The use of the best DMAP/hydrazone ligand L2 allowed using cheaper and more ‘atom-economic’ HBpin as the boron source in the same siteselective borylations (method B). 20 The reaction crudes can be used in Suzuki–Miyaura couplingswithoutanyfurtherpurification, and the resulting biphenyl derivatives can be transformed into valuable intermediates for the synthesis of modified Sartantype drugs upon high yielding, ‘one-pot’ functional group transformations. NMR and X-ray data for monoborylated N,N-dimethylhydrazones indicated the absence of N–B interactions in these products, 17,20 a fact that can be attributed to the significant NMe 2 /Me(pinacol) steric repulsion. Therefore, the hydrazone N(sp 2 ) atom remains available to achieve a second directed borylation. Consequently, aromatic N,N- dimethylhydrazones can be ortho,ortho0-diborylated in nearly quantitative yields (Scheme 12). 21 These products proved to be useful synthetic intermediates that can be unsymmetrically functionalised by introduction of two different electrophiles. In a related context, Clark et al. 22 have recently reported the nitrogen-directed ortho-C–H borylation of benzylic amines using the picolylamine ligand–[Ir(m-OMe)(cod)] 2 (2 : 1) system as the catalyst (Scheme 13). The original idea was to use bifunctional ligands containing N–H bonds that could be used to direct C–H borylation through hydrogen bonding to the directing group (Lewis base) in the substrate, but during the study they observed that the N,N-dimethylated ligand (lacking N–H bonds) afforded the corresponding ortho-borylated product with equal regioselectivity and higher yield. In accordance with this result, the origin of the ortho-regioselectivity seems to lie in the hemilability of the ligand, 17 instead of a hydrogen bonding directing effect as it was originally proposed. 2.1.2. Relay-directed borylations. A second strategy developed by Hartwig and co-workers for the site-selective Ir(III)- catalysed borylation of arenes is based on the use of silanes as traceless directing groups (Scheme 14). 23 Using benzyl dimethylsilanes as substrates, it was envisaged that an initial Si–H/Ir–B s-bond metathesis between the above mentioned catalytically active species Iand the substrate would render a silyl bis-boryl Ir complex II in which the intramolecular activation of the ortho CH bonds takes place preferentially to afford intermediate III which after reductive elimination (-IV) and Scheme 9 Envisaged mechanism using hemilabile N,N-ligands. Scheme 10 Directed borylation of arylpyridines/isoquinolines. Fig. 1 Borylated aryl isoquinoline (BAI) dyes. Chem Soc Rev Tutorial Review Published on 20 February 2014. Downloaded by Centro de Investigaciones Cientificas Isla de la Cartuja (CICIC) on 24/06/2014 10:21:16. View Article Online 3234 |Chem.Soc.Rev.,2014, 43,3229--3243 This journal is ©The Royal Society of Chemistry 2014 reaction with B 2 pin 2 releases the product and regenerates the catalyst. Under optimized conditions, this procedure affords the corresponding ortho-borylated products in good to excellent yields; the formation of small amounts of ortho,ortho0- diborylated arylboronic esters is observed in some cases. Although benzylsilanes can be easily transformed into valuable intermediates, the methodology has been applied to more interesting substrates, such as silyl ethers and silylamines, formed in situ by iridium-catalysed silylation of the corresponding phenols and anilines. This ‘one pot’ silylation– borylation procedure affords the corresponding boronic esters in good NMR or GC yields, but protodeborylation products are observed during purification by flash chromatography. Alternatively, the reaction crude mixtures can be treated with KHF 2 to afford ortho-trifluoroborylated aryl alcohols in 79–100% yield. Silyl-directed borylations have also been applied to the regioselective borylation at the 7-position of indoles (Scheme 15) 24 which are borylated at the most reactive 2-position by direct borylation. 25 In contrast to the previously mentioned methods based on chelating effects, 14,15 this procedure tolerates the use of 2-unsubstituted substrates. The Ru-catalysed N-silylation followed by Ir-catalysed borylation affords the corresponding 7-borylated indoles with complete regioselectivity in moderate yields. Scheme 11 Directed borylation of aromatic N,N-dimethylhydrazones. Scheme 12 Hydrazone-directed ortho,ortho’-diborylations and sequential disymmetric functionalizations. Scheme 13 Ir-catalysed C–H borylation of benzylic amines. Tutorial Review Chem Soc Rev Published on 20 February 2014. Downloaded by Centro de Investigaciones Cientificas Isla de la Cartuja (CICIC) on 24/06/2014 10:21:16. View Article Online This journal is ©The Royal Society of Chemistry 2014 Chem. Soc. Rev., 2014, 43,3229--3243 | 3235 2.1.3. Outer sphere H-bond-directed borylations. Outer sphere direction is a concept that refers to the recognition of a functionality in the substrate by a ligand on the catalyst. Based on this idea, Smith, Maleczka, Singleton et al. 26 explored the directing effect of acidic NH groups in monoprotected anilines, finding out that Boc protecting groups provide a significant ortho selectivity in the borylations performed with B 2 pin 2 as the reagent and the unmodified [Ir(m-OMe)(cod)] 2 – dtbpy catalytic system. Control experiments and computational studies support an outer sphere mechanism initiated by the formation of a (Boc)NH–O(Bpin) hydrogen bond between the NH group of the substrate and the basic oxygen atom of one of the catalyst boryl groups (Scheme 16). The efficiency of the NH bond interaction increases with the basicity of the pinacolate oxygen atom in the catalytically active species I, which can be increased with more electron-rich dipyridyl ligands. Accordingly, an enhancement of the orthoselectivity was observed when donating groups (NMe 2 , OMe, tBu) were installed in the 4,40positions of the bipyridine ligands. This borylation reaction was shown to be compatible with the presence of different electron donating and electron withdrawing groups, but a complete ortho-regioselective C–H borylation was only observed in para-monosubstituted substrates. With meta-substituted derivatives, a mixture of borylated products at 5 and 6-positions was obtained. This methodology was also extended to the borylation of a Bocprotected enamine, which under similar conditions afforded the product borylated at the b-position in 73% yield and with complete regioselectivity. The strategy failed for the ortho-selective borylation of free anilines, presumably due to the poor acidity of the free amino group. Very recently, however, it has been demonstrated by the same authors that Bpin can be used as a traceless directing group for the ortho borylation of a variety of anilines, using in this case 3,4,7,8-tetramethyl-1,10-phenanthroline (tmphen) as the ligand and HBpin (2–3 equiv.) as the protecting group and the borylating reagent. 27 In these reactions, the NBpin directing group can be installed and removed in situ, and the products Scheme 14 Silicon-directed ortho-borylations of arenes and the proposed catalytic cycle. Scheme 15 Silicon-directed borylations of indoles. Scheme 16 Outer-sphere directed borylation of Boc-protected anilines and enamines. Chem Soc Rev Tutorial Review Published on 20 February 2014. Downloaded by Centro de Investigaciones Cientificas Isla de la Cartuja (CICIC) on 24/06/2014 10:21:16. View Article Online 3236 |Chem.Soc.Rev.,2014, 43,3229--3243 This journal is ©The Royal Society of Chemistry 2014 were isolated in better yields compared with those observed by using the NBoc protecting group. This is remarkable considering that a much lower catalyst loading (typically eight times lower) was used in these cases. As in the previous case, the reaction tolerates substitution by electron donating and electron-withdrawing groups, but the scope of the method is again limited to para-substituted substrates (Scheme 17). 2.2. Pd-catalysed borylations Palladium-based catalysts have not been extensively used in C–H borylation due to the fact that the obtained product (i.e. a boronic ester) is susceptible to decomposition via transmetalation with the Pd(II) species. Recently, however, Yu et al. 28 reported the Pd-catalysed oxidative borylation of N-arylbenzamides with a diboron reagent via aPd( II)/Pd(0) manifold. Their strategy was based on the use of a weak base (e.g. TsONa) that can promote the transmetalation of the Bpin fragment from the B 2 pin 2 to the metal center, without activating the generated aryl boronic ester. After an extensive screening of conditions, they found that the ideal catalytic system consists of 1 : 3 Pd(OAc) 2 /dba as the catalyst, TsONa (1.5 eq.) as the base and K 2 S 2 O 8 (2 eq.) as the oxidant (Scheme 18). Under these conditions, a wide family of benzamides carrying the highly efficient auxiliary group –CONHAr [Ar = (4-CF 3 )C 6 F 4 ]have been regioselectively borylated to afford the ortho-borylated benzamides in 46–85% yield. The formation of small amounts (5–18%) of ortho,ortho0-diborylated products was observed in some cases. In addition, borylated benzamides can be efficiently transformed into interesting synthetic intermediates by hydroxylation, cyanation, amination and halogenation of the Bpin group. A second example of Pd-catalysed directed ortho-borylation has been recently reported by Fu et al. 29 In this case, the reaction is carried out under acidic conditions to avoid the decomposition of the borylated product. A complete regioselectivity for the ortho-borylation of acetanilides was achieved under mild conditions, employing Pd(OAc) 2 as the catalyst, benzoquinone as the oxidant and without the need of an inert atmosphere (Scheme 19). A wide family of acetanilides with donating and withdrawing groups were used to afford the orthoborylated products in moderate to good yields. The boron fragment adopts a tetrahedral coordination due to the formation of an internal CO–B bond, which makes the acetyl directing group unavailable for further directed ortho0- borylation. A substantial intermolecular isotopic effect was observed when the borylation reaction was performed using a stoichiometric amount of a palladacycle pre-generated from acetanilide. According to the collected data, a plausible mechanism (Scheme 20) was proposed involving the C–H activation by the Pd(II) center as the rate-determining step, followed by transmetalation of Bpin to Pd and formation of the product by reductive elimination. Finally, Pd(0) is re-oxidized to Pd(II)by BQ to close the catalytic cycle. A similar mechanism was proposed by Yu et al., 28 but in this case a stronger oxidant (K 2 S 2 O 8 ) was used and an alternative catalytic cycle involving Pd(II)/Pd(IV) cannot be disregarded. In the Pd-catalysed methodologies previously mentioned, as well as in the chelate-directed Ir-catalysed borylations, the directing group acts as a Lewis base, which coordinates to the metal centre thus driving the C–H bond (usually in the ortho position) to the proximity of the metal centre and therefore Scheme 17 Outer-sphere directed borylation of free anilines. Scheme 18 Pd-catalysed oxidative ortho-C–H borylation of benzamides. Scheme 19 Palladium-catalysed monoselective C–H borylation of acetanilides under acidic conditions. Scheme 20 Proposed mechanism for Pd-catalysed C–H borylation. Tutorial Review Chem Soc Rev Published on 20 February 2014. Downloaded by Centro de Investigaciones Cientificas Isla de la Cartuja (CICIC) on 24/06/2014 10:21:16. View Article Online This journal is ©The Royal Society of Chemistry 2014 Chem.Soc.Rev.,2014, 43,3229--3243 | 3237 triggering the C–H activation. Kuninobu, Takai et al. 30 have very recently introduced a new strategy for the Pd-catalysed orthoselective C–H borylation of 2-arylpyridines. In this case the electron pair of the directing group (Lewis base) is coordinated to a Lewis acidic boron reagent, which also bears a hydrogen atom. This interaction generates a species which is then activated by oxidative addition of a transition metal to the B–H bond. The reaction then proceeds from the resulting intermediate after successive oxidation by an external reagent and reductive elimination to afford the product and regenerate the catalyst (Scheme 21). Initial experiments performed to explore the application of this new strategy failed when pinacolborane was used as the boron source, but use of a more Lewis acidic reagent such as 9-borabicyclo[3.3.1]nonane (9-BBN) in the presence of Pd(OAc) 2 as the catalyst allowed the selective borylation of a series of 2-arylpyridines under mild conditions (Scheme 22). Remarkably, directed borylation in the absence of catalysts also takes place for some substrates via a free-radical process at 135 1C, albeit in lower yields. 2.3. Rh-catalysed borylations Rh-based catalysts have been typically used in the direct borylation of C–H bonds, 31,32 but their use has not been widely extended because harsh conditions are required compared with Ir–dtbpy systems. Recently, Sawamura et al. 33 described the first example of nitrogen directed C–H borylations that involve a silica-supported rhodium catalyst (P/Rh 1 : 1) containing their silica-SMAP supported phosphine as the ligand. 12 Different homogenous catalysts bearing phosphines or dtbpy as ligands were also tested, but no reaction or low conversions were observed. The silica-SMAP–Rh catalyst has allowed achievement of ortho-selective C–H borylations of a wide range of arenes containing different sp 2 nitrogen-based directing groups such as pyridine, imidazole, oxazoline and pyrazole, or sp 3 nitrogen-based directing groups such as NMe 2 , pyrrolidine and 1,3-dimethyl-imidazolidine, affording the corresponding borylated products in 63–117% yields (Scheme 23). 0.5 equivalents of the borylating agent (B 2 pin 2 ) are needed to avoid the formation of the 2,6-diborylated by-products, which are observed in 4–13% yield depending on the substrate. A second example of directed Rh-catalysed C–H borylation has been recently published, and it also involves a nitrogencontaining functionality as the directing group. In this case, Chen, Yan et al. 34 described a C–H borylation–amination procedure for the synthesis of N–H carbazoles employing a NH 2 group directed C–H borylation as the key reaction. The complex [RhCp*(OTf) 2 ] proved to be the most active catalyst for Scheme 21 Lewis base–borane interaction strategy for directed orthoborylation. Scheme 22 Pd-catalysed C–H borylation of 2-arylpyridines. Scheme 23 Rh-catalysed nitrogen directed ortho-C–H borylation. Chem Soc Rev Tutorial Review Published on 20 February 2014. Downloaded by Centro de Investigaciones Cientificas Isla de la Cartuja (CICIC) on 24/06/2014 10:21:16. View Article Online