A Systematic Review of the Use of Agile Methodologies in Education to Foster Sustainability Competencies

sustainability Review A Systematic Review of the Use of Agile Methodologies in Education to Foster Sustainability Competencies Abigail López-Alcarria 1,†,‡, Alberto Olivares-Vicente 2,*,‡ and Fátima Poza-Vilches 1,† 1Department of Research Methods in Education, University of Granada, 18071 Granada, Spain; [email protected] (A.L.-A.); [email protected] (F.P.-V.) 2Independent Scholar, 18014 Granada, Spain *Correspondence: [email protected] † Current address: Facultad de Ciencias de la Educación, Campus de Cartuja s/n, 18071 Granada, Spain. ‡ These authors contributed equally to this work. Received: 16 March 2019; Accepted: 13 May 2019; Published: 22 May 2019   Abstract: Life-long learning and Education for Sustainable Development (ESD) in the current fast-evolving and ever-changing society requires modern pedagogical tools and methodologies that help the transmission of key competencies such as coping with uncertainty, adaptability, creativity, dialog, respect, self-confidence, emotional intelligence, responsibility and systemic thinking. The recent trend of the application of Agile methodologies for the management of projects in different fields can be a valuable tool to convey these competencies due to the participative, collaborative and constructionist principles in which they are deeply rooted. Some experiences of the application of Agile Methodologies in education—originating what is known as Agile Education—are, therefore, starting to appear in the literature. This work carries out a systematic review to analyze how this modern pedagogical tool is being used to foster key sustainable development competencies in the field of education. Results are presented for 11 out of 121 analyzed studies which present a direct link between key ESD competencies and Agile Education. It is shown that Agile Education creates a learning environment favorable for the creation of responsible and sustainable citizens while improving the performance, satisfaction and motivation of both faculty and students. Keywords: agile methodologies; kanban; scrum; education; project-based learning; education for sustainability; competency-based learning 1. Introduction The world is in permanent change. People, processes and environments change and evolve at an increasing speed in a world characterized by marked interconnections and externalities. It is therefore rather naive to think that projects, and individuals participating and managing them, will not need to adapt and embrace change and uncertainty in order to successfully achieve the outlined objectives. The labor market is not an exception; agility in processes and the need for continuous training are essential requirements for any worker and any organization. To assess this new scenario, Agile methodologies were conceived as an alternative to traditional project and organization management methodologies based in thorough and sequential planning (waterfall models). These methodologies’ tenets are based on the fact that any project, no matter the size, has a high degree of complexity due to the large number of variables and inputs that can affect its course. Instead of dedicating the efforts of the participants to forecasting events and associated tasks that may affect the project in the long-term and fight change to stick to a series of rigid requirements and predefined functionalities, Agile methodologies praise adaptive development by means of short continuous cycles of planning, action, correction and adjustment to produce valuable increments in outcomes. Sustainability 2019,11, 2915; doi:10.3390/su11102915 www.mdpi.com/journal/sustainability Sustainability 2019,11, 2915 2 of 29 Education, as the key process for generating sustainable and responsible citizens and prepare them for their insertion in the labor market, is also affected by new challenges from our ever-changing society. “Recognizing and responding to change therefore becomes one of the main responsibilities of education alongside developing adaptable self-motivated lifelong learners and developing their capabilities in order to live a life that they value [ 1 ]”. “[...] As learning becomes more personalized and requires adjustment to changing conditions and requirements while fulfilling stringent accreditation standards, new pedagogical methods are required that can reduce the cost of change” [ 2 ]. It is noticeable then, how “education is faced with the challenge of developing our social, cultural, and economic future, but lacks pedagogical approaches or structures capable of efficiently and effectively responding to a world in which the underlying constant is change. [...] pedagogic practices within formal learning environments need to be examined and innovative practices that support learning in a connected, collaborative way need to be modeled and legitimized” [1]. Education is thus a large life-long project that needs effective management. So far, “in many ways, traditional education design (following an ADDIE Analysis-DevelopmentEvaluation-Design-Implementation model developed by the Center for Educational Technology at Florida State University for the U.S. Army [ 3 ] in 1975 and later employed to manage projects in multiple subject areas) maps onto the waterfall model: (i) the course is specified according to intended learning outcomes (requirements); (ii) the syllabus of subjects is planned (design); (iii) the teaching materials are produced (development); (iv) the materials are delivered to students (implementation); (v) the course is evaluated by students (testing); and (vi) any changes from the evaluation are incorporated before the next round (maintenance)” [ 4 ]. When analyzing evaluation, one of the most important phases of education, we can see that “traditionally, students perform a course evaluation that feeds into future course improvements [...] this does not directly benefit these students, but it does provide valuable insights into their learning experience. Clearly, if this evaluation can be integrated into the course at multiple points, students may actually see the benefits more immediately” [ 4 ]. In order to produce valuable changes during the teaching of a course, Agile Education implements a series of techniques that promote continuous and significant feedback between both faculty and students. On the other hand, one of the key challenges for Education for Sustainable Development (ESD) is to define pedagogies and tools that permit the transmission of competencies in a transversal and holistic way and allow sustainability to expand out of teaching scenarios that are traditionally bounded to subject areas related to nature sciences and environmental studies [5]. With this systematic review, we aim to analyze the relationships between Agile methodologies and Education that have given birth to Agile Education, as well as the competencies that are empowered through its application and their relation to ESD. We aim to confirm whether Agile Education conforms a valuable educational framework that helps education in modern societies in a more efficient and sustainable way. The rest of the article is structured as follows: a comprehensive description of the theoretical principles of Agile methodologies and their application in education is presented in Section 2. This section has been written to produce a self-contained manuscript which provides enough context to readers new to this type of methodology, thus possibly leading to a longer theoretical framework description prior to the analysis of the results when compared to other systematic reviews in the ESD field. The research questions and objectives of the review are presented in Section 3. The review methodology, including the literature screening process and selection criteria, is described in Section 4. Analyzed experiences and results of the qualitative review are, included in Section 5. Finally, conclusions are outlined in Section 7. Sustainability 2019,11, 2915 3 of 29 2. Theoretical Framework 2.1. Agile Methodologies From a general standpoint, Agile methodologies—normally simply referred to as Agile—are the structured methods and tools employed to put into practice the Agile Mindset [ 6 ] in every aspect of life. Agile is, in turn, “the ability to create and respond to change. It is a way of dealing with, and ultimately succeeding in, an uncertain and turbulent environment. [...] It is really about thinking through how you can understand what is going on in the environment that you are in today, identify what uncertainty you are facing, and figure out how you can adapt to that as you go along” [ 7 ]. Agile methodologies are a group of project management approaches which oppose, in many ways, traditional waterfall style project management techniques in which the project is wholly defined before starting to execute it. This means that in traditional project management styles all the specifications, resources (both human and financial), tasks and timing need to be defined before starting the actual work. On the other hand, “Agile methodologies are in general oriented to the quick obtaining of results and customer satisfaction. This is accomplished by embracing changing requirements, delivering products frequently, using human-centric methods, and engaging the customer in regular collaboration. Special emphasis is put on articulating goals, facilitating interactions, improving team dynamics, supporting collaboration, and encouraging experimentation and innovation” [2]. As with many different techniques, there is no formal publication or work which could be considered as the conception of Agile methodologies. Different experiences with quick incremental definition-execution-evaluation-correction production cycles can be tracked back to the 1950s based on a publication from 2003 by Craig Larman and Victor Basili [ 8 ] in which they describe having worked with incremental development technologies at IBM in 1957 [ 9 ]. It was only in 2001 that a group of 17 software developers and Agile practitioners gathered together to define the Manifesto for Agile Software Development, which reads: Individuals and interactions over processes and tools. Working software over comprehensive documentation. Customer collaboration over contract negotiation. Responding to change over following a plan. This manifesto puts in words the four main principles of the Agile Mindset applied to software development. From this moment, there was a quick adoption of methods such as Kanban or Scrum (described later in the section), which translate these principles into elaborated practical methodologies to improve the efficiency [10] of software production projects. Why have Agile methodologies become so popular? Different studies such as the CHAOS Report by the Standish Group [ 10 ], in which the success rate of thousands of projects worldwide from different sectors is measured, have provided evidence that this type of methodology triples the success rate (understood as delivering a project complying with the requirements with no or minimal budget and delivery deviations) of waterfall-based projects. Practitioners from fields other than software development [ 11 – 14 ], including education, as we will later see, have approached and embraced the methodology with similar success rates. Education is based on planning and executing multiple projects, which are, in turn, based on a series of specifications (competencies). Programs, courses, didactic units, sessions and assignments are all projects of different magnitude in which both instructors and students participate. It is very important, then, to select a method that allows them to properly steer each project. To do so, both students and instructors should know beforehand the main differences of the two most employed project management trends, that is, Traditional Waterfall-based methodologies and Agile methodologies. As mentioned above, they present important differences in the main aspects of project management (uncertainty, change, team and time management). These differences are presented in Table 1. Sustainability 2019,11, 2915 4 of 29 Table 1. Differences between Traditional Project Management and Agile Methodologies. Dimension Traditional Methodologies Agile Methodologies Uncertainty Management Aim to harness uncertainty from the beginning of the project to palliate it. The project is wholly defined since the beginning. A project plan, with strict contracts is defined. All control parameters of the project such as quality, time, cost, etc. are continuously tracked. KPIs are defined at the beginning and maintained during all the project. Accept uncertainty and do not try to minimize it. Instead they propose mechanisms to quickly adapt to it and easily readjust the course. This is possible since a refactoring model is followed. Small incremental changes are released on top of a minimum viable product/solution and feedback from customers is gathered before long deviations are produced. Change Management Consider that the project is perfectly defined since its conception and that no major changes should take place nor accepted. If changes are forced by customer, the project is brought back to the conception and definition phase, consequently leading to delays. Change is accepted and considered inevitable and necessary. It is considered as the core of a continuous learning process. The project is open to feedback from customers to adjust it to their needs. Team Management Teams are controlled by a rigid hierarchy with multiple levels of management. Project managers define the tasks to do and most importantly, how to do them and the required time. This micromanagement strategy reduces the autonomy of the rest of the team members. Customers are not included in the team so their visibility on the project’s partial outcomes is reduced. There is a flat hierarchy. The team is multidisciplinary and self-organizes. The customer is included in the team to increase transparency. The task assignees determine how to execute them and estimate the effort required. Effort is estimated taking into consideration the time employed to complete the task, the complexity of the actions involved and the risk of the tasks. Tasks with higher risk of causing issues to the system and the project usually require from additional testing time, which contributes to increasing the final effort. Time Management Based on the waterfall technique and Gantt Charts. The definition of all tasks and subtasks and the time necessary to complete them is defined at the beginning of the project. The model is very rigid and, thus, sensitive to changes and dependencies between tasks. Any change in an intermediate task affects the subsequent ones. Accept that humans are not good at estimating duration of tasks accurately. Time is substituted by the concept of effort. A general list of tasks is generated at the beginning of the project (customer needs) and then particularized at the beginning of each incremental work cycle. Examples of Agile Methodologies Different methods following Agile principles have originated within the last two decades, including Scrum, Kanban, eXtreme Programming (XP), Crystal, Dynamic Systems Development Method (DSDM), Feature Driven Development (FDD). Among them, Scrum and Kanban are arguably the most popular and extended ones. Given that, as will be explained in Section 5, most experiences in education are based on these two methods, we will, for the sake of clarity, briefly describe their principles. •Scrum: The Agile Scrum Methodology is probably the most popular application of the Agile principles. It was proposed by Jeff Sutherland and Ken Schwaber [ 15 , 16 ] in the context of software production, but has since been applied in different contexts [ 17 – 20 ]. Its popularity resides in the simplicity of its application. Projects are divided in Sprints, which are time-boxed cycles that typically last between 2 and 4 weeks, and which are repeated over and over until the project is finalized (or indefinitely if a product which is continuously updated is being produced). Teams are Sustainability 2019,11, 2915 5 of 29 divided into different roles: (i) developers, carrying out the actual development tasks, (ii) a Product Owner which is in contact with the customer and is in charge of creating the project and Sprint Backlogs which are composed of User Stories and (iii) the Scrum Master who acts as a facilitator of the development team, helping to remove all the blockers that may arise and ensuring that the Scrum Framework is followed. Scrum Masters are also responsible for holding daily stand-up meetings and helping the developers understand the definition of done of a User Story. This role might be rotative and is normally held by a developer or a former developer. The customer can also be considered as a member of the team. The workflow is structured as follows: (i) At the beginning of the project, the roles are assigned and the team is assembled. (ii) A meeting is held between the Product Owner and the customer to extract the project backlog. The Project Backlog is a list of User Stories. User Stories are self-contained entities which define a functionality required by the customer for the project or the service. They can be grouped into a Epics which define a higher-level functionality of the system that cannot be delivered in a single sprint, and which are normally divided into smaller User Stories. For every User Story, a series of Acceptance Criteria are agreed between the customer and the Product Owner (occasionally they might also be written between developers and Product Owners to increase transparency). (iii) A Sprint kick-off meeting is held between the Product Owner, the Scrum Master and the Development team. During the Sprint kick-off meeting the team decides which User Stories will be implemented during the sprint. The selected User Stories compose the Sprint Backlog. (iv) After the kick-off meeting, the sprint is initialized and the development team starts working on the User Stories. Typically, different tools such as Jira [ 21 ], Version One [ 22 ] and Pivotal Tracker [ 23 ] are used to allow the team keeping track of the progress of the tasks. User Stories have typically 4 status: “To do”, “In Progress”, “To Validate” and “Done”. When a User Story is finished by a developer, it is labeled as “To Validate” and a member in charge of checking the compliance of the Acceptance Criteria tests it and transfers it to "Done" if they are all met. (v) Everyday, a 15 min Stand-up meeting, or Daily Scrum is held between the Scrum Master and the development team. During this short meeting, the Scrum Master asks three questions to each one of the members of the development team: (1) What did you do yesterday?, (2) What will you do today? and (3) Are there any impediments in your way? With this information the Scrum Master can track the health of his team and the sprint progress and help them solve the blocking points. (vi) Prior to the finalization of the Sprint, a Sprint Review meeting is held between all members of the team in which the results of the Sprint are presented to the customer to receive their feedback. (vii) Normally right after the Sprint Review, a Sprint Retrospective Meeting is held between all the members of the team in which an internal assessment of the results of the sprint are analyzed. Team members agree on what should start, stop and continue to be done in order to keep improving the process and obtain better results in the subsequent Sprint. The cycle, shown in Figure 1, is then restarted. •Kanban: Kanban (visual card in Japanese) is the simplest Agile Project Management Methodology. The main idea is to keep a Kanban board (see Figure 2) with the list of tasks do be done and their status (typically divided in three columns: “To do”, “Doing” and “Done”). Tasks are moved along status to show the progress of the work. The main difference with respect to Scrum is that it does not define time-framed work intervals and, therefore, all the ceremonies (meetings) held in Scrum are not defined. Also, a differentiating characteristic between both methods is that Sustainability 2019,11, 2915 6 of 29 Kanban praises the limitation of the work in progress to prevent overloads, allowing the team to focus on a reduced number of tasks, also helping to identify bottlenecks before they become a blocking element. Kanban might be a good approach for projects with a reduced team (even for solo projects). Kanban is also often seen as an intermediate step in the transition from traditional methodologies to fully Agile methodologies like Scrum. “Kanban is a method to manage the creation of products with the vision of continual delivery while not oversubscribing development teams. Kanban is meant to be an enhancement to existing organizational processes for continued improvement while not totally changing organization’s existing systems” [ 24 ]. Kanban boards can be both physical (board with sticky notes) or virtual, in the case of remote collaborative work. Trello [25] is a widespread tool allowing the creation of shared virtual Kanban boards. Figure 1. Scrum Life cycle. Source: Microsoft Azure [26]. TO DO DOING DONE Task 2 Task 1Task 3 Task 4 Task 5 Task 6 Figure 2. Representation of a classical Kanban board. Source: Own elaboration. 2.2. Agile Education: Agile Methodologies in Education As stated by Stewart [ 27 ], “the correspondence between elements seen in the agile software development environment and the academic environment are striking. At first glance, the similarities can be easily seen. Both teaching and software development require detailed planning and scheduling. Each requires management and constant assessment and feedback from all involved. Making sure a course is delivered correctly and on time presents similar difficulties to those encountered in software development projects”. The parallelism between different elements in private or public organizations executing projects to generate products or services and an educational environment are presented in Table 2. Notice how most important elements and terms have a counterpart in educational environments. Sustainability 2019,11, 2915 7 of 29 Table 2. Parallelism of terms and concepts between project management (PM) environments and educational environments. Term/Concept in PM Environments Term/Concept in Education Environments Customers as beneficiaries of a product or a service ⇔ Students as beneficiaries of an education service, and in lower degree, parents and other stakeholders. Project product ⇔Knowledge, competencies, attitudes and skills acquired by the student. Partial Releases ⇔Completed didactic units. Final Releases ⇔ Final result delivered to the student when the educational program or course is over in terms of achievement of predefined requirements. Detailed plan ⇔Syllabus and didactic units and their execution. Strict contracts ⇔ Over-specified and rigid syllabus and course planning leaving little autonomy to instructors. Control Parameters ⇔Assessment parameters (both external and internal). Refactoring model ⇔ Plans to continuously improve the educational programs (ideally applied during the courses). Basic functionality ⇔ List of competencies and basic objectives of the educational program, course, didactic unit, course session, assignment or activity. Minimum Viable Product ⇔ Minimum expected result of every educational program, course, didactic unit, course session, assignment or activity (in terms of grades and Competencies obtained by students). Scope of the project ⇔ Scope of every educational program, course, didactical unit, course session, assignment or activity. Providers ⇔ Providers of educational services (public administration, legislators, instructors, other staff, etc.). Partner ⇔ Students and their families, other stakeholders collaboration in the educational service such as private companies, foundations, NGOs, etc. Project delays ⇔ Delays in the execution of didactic units, course sessions, assignments or activities that are finished without meeting the predefined objectives. Any deviation when putting into practice an educational program or a course. Disagreements between providers and customers ⇔ Conflicts between students and/or their families and faculty about the quality and misalignments between the expected results and the final outcome. Resisting the change ⇔ Rigid syllabus and educational plans hard to modify. Complex bureaucratic process, slow administration, instructors reticent to adopting new pedagogies, non-participative students. Agreed Specifications ⇔ Communication between instructors and students about the objectives of the educational program, course, didactic unit, course session, assignment or activity so that the objectives and expected results are clear and known by all stakeholders. Team structure ⇔ Composition of teams inside an educational project (teams of instructors, teams of students, teams of parents). Hierarchical teams ⇔ Hierarchical classrooms with instructors as omnipotent and inaccessible figures. Project manager ⇔Instructor, program coordinator, Principal. Micromanagement ⇔ Over specification by the instructors of the syllabus and students’ way to work and learn. Project/Company Quality Standards ⇔ Education quality standards of the instructor, department, school, city, region or country. Waterfall Project Management ⇔ Educational project management model based on the exhaustive definition of the courses, didactic units, course sessions, assignments and activities prior to the execution, leaving little or no space to modification of the time-boxed sessions and their content. Typically outlined using a Gantt chart. Sustainability 2019,11, 2915 8 of 29 It is clear then that education is in general composed of multiple projects of different magnitudes that require a management methodology to warrant the achievement of the objectives. Therefore, it is reasonable to hypothesize that the introduction of agile methodologies, which have been shown to be highly effective in improving the success of project and product delivery in private industry, as well as in different public institutions [ 28 , 29 ] when compared to traditional project management methodologies (see Figure 3), will benefit the teaching/learning processes in education. 42% 50% 8% 26% 53% 21% 0% 10% 20% 30% 40% 50% 60% Successful Challenged Failed Agile Waterfall 10% 20% 35% 4% 10% 16% 0% 5% 10% 15% 20% 25% 30% 35% 40% Small Medium Large Agile Waterfall Figure 3. Project success rates depending on project management methodology employed ( left ). Project failure rate depending on project management methodology employed and project size ( right ). Source: Standish Group Chaos Studies 2013–2017 [10]. In the same way we can find traditional project management methodologies in different fields, we can also find equivalent traditional educational methodologies which have multiple points in common. Typically, learning designs based on conductive education which consider the figure of the instructor as the immediate source of learning [ 30 ] (the professor’s role is to “profess”, while students are only present to “absorb it all” [ 31 ]) present similarities to traditional project management methodologies in which the project manager has the equivalent role to “herd” his hierarchically inferior colleagues. Additionally, professors are also bound by their superiors and have little range of action due to the over specification in the educational institution ordinances that leaves very little flexibility during implementation [ 32 ]. Table 3shows some of the differences between traditional behavioral learning and Agile constructivist learning. As in private industry, different problems derived from the application of traditional learning methodologies or traditional methodologies to manage the design and application of educational programs can be identified. As stated in Reference [ 33 ], education, especially at higher levels, fails to provide students with strategies and necessary skills to work in groups in an effective way, which is a key competency demanded by the labor market. Students are not taught to work collaboratively nor communicate in an effective way. They do not receive training either on how to manage their emotions and actively listen and respect others’ opinions and proposals or to work with individuals with different sets of skills. They show large deficiencies as well when managing time to self-organize or to complete individual or group assignments. The author also provides five reasons for which Agile Methodologies, and more specifically Scrum, might be a good method to apply to higher education: •Most courses include group works in their syllabus. • Most university degrees are oriented to the creation of a product or a service. Scrum may help to create innovative and creative environments. • Students should have the capacity to acquire knowledge, be critical and self-reflective, know to manage themselves, solve problems, be creative, collaborate in group. These are competencies that are empowered by Scrum. • Group projects have two agents: instructor and students. Scrum has the same structure and adds a third one, the Scrum Master that is the link between the professor and the team. Sustainability 2019,11, 2915 9 of 29 • Assessment and evaluation are normally done after the work is turned in. In most cases the projects presented by students are partially incomplete and lack quality. In Scrum, projects are continuously inspected by professors, leaving no space for delays in the delivery and misalignments with the required specifications. Table 3. Main differences between traditional behavioral learning and Agile constructivist learning. Element Traditional Learning Agile Learning Syllabus Over specified. Rigid. Little opportunity to introduce changes during course execution. No discussion of content with students. Defined in a general way. Open to modification to adjust it to students’ motivations interests and performance. Agreed and communicated at the beginning of each block/unit. Schedule and Timing Over specified. Waterfall approach. Difficulty to allocate extra time when needed. Divided into blocks. Not directly associated to syllabus in a rigid way. Roles Professor: source of knowledge, micromanages students. Professor: facilitator of the learning process, one of multiple sources of knowledge. Students: passively absorb knowledge. Students: active learners, self-organized, autonomous. Communication and interaction Reduced. Encouraged. Open discussion about course content, progress and organization. Education theory and learning design Behavioral theory and other professor-centered approaches. Constructivist theory. Problem based learning. Connectivism, Cooperative and Colaborative learning. Class structure Highly hierarchical. Individual learning. Flat hierarchy. Both group and individual learning. Evaluation Reduced (pre-post evaluation in best case scenario). Evaluation of students’ performance. Continuous evaluation of students’ performance and course execution. Similarly, Lembo and Vacca [ 34 ] identify four issues in traditional learning that can be palliated or corrected by the application of Agile Learning: • “Effectiveness of documentation and plan revision: The project plan related to each subject is made at the beginning of the course; each time that some problem happens imposing the plan revision, the new project plan should be rewritten in order to make this document effective”. • “Time scheduling of the project: It is well known that projects are often delayed; it can happen that, in order to meet deadlines, the realization of some activities could be accelerated, yielding problems in student understanding skills and increasing the workload.” • “Marginal role of students and their parents in the design of course: Students and their parents have little space in the course design. They participate a few times a year to teachers’ team meetings. Their contribution is often limited to the discussion about general problems arising. From an engineering point of view, the students and parents’ role is essentially limited to the validation of the instructional contract”. • “Unbalanced student workload among the disciplines and the term: because each discipline produces its own work plan applying the more appropriate method and without a detailed verification of the relations among the modules or activities of the different disciplines, it could be possible that in some period the student workloads results unbalanced or unbearable, producing negative results on the quality of learning”. Sustainability 2019,11, 2915 16 of 29 therefore, the control group) and the remaining group of 47 students follows the new Agile approach. Results show that in 7 of the 10 competencies there are no statistically significant differences in the perceptions of the students about the efficiency of the program to acquire them. However, when it comes to initiative, self-confidence and communication competencies, the study revealed that the hypothesis of the superiority of the experimental Agile program to transmit them, was validated. Cubric [ 39 ] presents an experience of using Agile methodologies to teach an Agile project management course in a business school. The paper presents a table in which the Agile Manifesto values are matched with Chickering and Gammson’s [ 72 ] and Dalton and Tharp [ 73 ] principles. From this matching, an interpretation in a learning and teaching context referred to as the “Agile Learning & Teaching (L&T) method” is proposed. The agile L&T method is based on two premises: learning results from concrete experience and learning as a collaborative process. The agile L&T model is based, as well, in Experiential Learning theories based on the four stage cyclic learning model by Kolb, Boyatzis and Mainemelis [ 74 ] because of its iterative and incremental nature. The method is put into practice using wikis as a means of collaboratively sharing knowledge. The Agile L&T method follows a similar structure to Scrum. There is a product backlog in which the topics to study are set by the leader at the beginning of the semesters. The course is structured in 5 sprints of 2 weeks and students are divided into groups of 4-5 members in which the role of the Scrum Master rotates. Additionally, the teacher acts as the Product Owner and is responsible for selecting the topics to be included in each Sprint Backlog, which is, in turn, published every two weeks after the lecture. Sprint planning, daily stand-up meetings and sprint reviews are scrupulously respected. The course requires students to create wiki articles about the topics indicated by the professor along the course. The author uses a survey composed of 43 items and secondary data sources such as wikispaces’ usage statistics, student grades and qualitative data from students’ reflections and module feedback. Two cohorts of 34 students taking the course in 2011 and 2012 were considered. The study aims to analyze different indicators and dimensions such as the initial uncertainty, impact on learning, engagement, performance, type of learning satisfaction, teamwork and the role of the teacher. The study finds that students value regular and prompt feedback, the engagement of the professor to improve their motivation and cohesion, and the practical applications of the methodology for other subjects and aspects of life. It also indicated that students’ learning was enhanced with constant review of the subject and early engagement with the module. Additionally, the perceived learning was not restricted to learning the content (preparing students for life-long learning). Students showed a high degree of perception and awareness of how the learning method has significantly contributed to improving key ESD competencies such as time-management, negotiation, respecting classmates and growing self-confidence in face-to-face communication. Regarding negative outcomes derived from the use of Agile Methodologies, teamwork issues were found in some cases; some students had difficulties when forming groups as they were not able to select a balanced team in terms of skills homogeneity; some members of the groups stablished themselves as leaders, disregarding, hence the flat hierarchy in which Agile Methodologies is usually based on; finally some communication issues between team members also arose. Razmov and Anderson [ 75 ] present an experience of an Agile teaching methodology applied to project-based software engineering courses. The authors reflect on the importance of feedback for adaptation and learning, and how increasing its frequency leads to more opportunities for both students and instructors. For the authors, not all students follow the same learning path and pace since each of them has their own background and learning style. Therefore, they can benefit from a personalized approach to teaching which is applicable by means of Agile teaching methodologies, which are considered to be all teaching approaches which have emphasis on the continuity of the learning process, are goal orientated, seek feedback from students, show flexibility in responding to student needs, present a short feedback cycle, and allow demand-based personalization of what is being taught. The authors make special emphasis on developing effective assessment and feedback tools that have direct and real impact on the progress of the course and improve critical thinking, self-assessment Sustainability 2019,11, 2915 17 of 29 and communication. To do so, they use artifacts like: (i) post-milestone 30-minutes project discussion meetings in which the instructors and teams clarify issues; (ii) post-milestone in-class retrospectives in which aspects to be improved are discussed; (iii) post-milestone anonymous peer reviews in which students rate the usefulness of the peer review they have received; (iv) reflective papers; (v) anonymous feedback forms; and (vi) a digital interaction system to allow students to provide quick feedback during course sessions. At the end of the three editions of the course that compose the study, students answered a questionnaire to rate the learning experience, the incremental delivery approach and the feedback mechanisms. The study reveals that instructors feel that Agile teaching reorganizes their time to focus on areas that matter the most and that there is less guesswork about what students may be thinking. Therefore, the competency to deal with uncertainty is built by implementing mechanisms to request and obtain regular feedback. Moreover perceptions of the students were highly positive, specially about the incremental delivery approach and the learning experience. Kastl and Romeike [ 76 ] present a qualitative case-study in which they analyze 11 interviews with 6 teachers on their observations from 20 Agile projects with over 400 students of secondary education computer engineering courses. Their aim is to gain insight into how Agile practices (and more specifically, the AMoPCE—Agile Model for Projects in Computing Education) assist individual learning processes in heterogeneous courses, and how it helps teachers to design and organize projects in order to support students individually. The work aims to answer five research questions: (i) how homogeneous vs. heterogeneous group forming in agile projects influences the performance of the individual students; (ii) how agile projects help the teachers to identify the individual strengths and weaknesses of their students with respect to such skills and to provide them with meaningful individual goals that fit their prerequisites; (iii) how agile projects support teachers to provide adequate individual guidance or coaching throughout projects that start early on in the student’s learning process; (iv) how agile projects foster the kind of interactions that support individual learning-processes; and (v) how agile projects foster the ability of the individual student to reflect and provide, receive, and implement feedback. Results show that competences like the enhancement of soft skills (communication), self-organization and ability to work in teams are strengthened via Agile. Additionally, the authors conclude that Agile projects can be an effective method to foster self-managed cooperative learning in heterogeneous classes since they enable all learners to construct flexible, generalized cognitive structures and to acquire fluid and crystallized abilities. An interesting experience to analyze the development of competencies to work in a global project involving countries with cultural differences by means of Agile Education is presented in Reference [ 46 ]. The study describes an experience of application of Scrum to manage a distributed software project course between a Canadian and a Finnish university involving 16 students by means of using Agilefant [ 77 ], an open-source backlog management system. Apart from the technical objectives of the project, the main goal of the experiment is to expose students to cultural differences in a global context. The authors identify competencies like teamwork, work estimation and planning and effective communication across large time zone differences as the desired outcome of the application of the Agile Education experience. Results show that despite the existence of some challenges in the way ideas are conveyed, students rate positively the experience of developing a real product, the methodology employed and the global context of the project. Moreover, students also develop competencies to have fluid communication and team work habits with their peers. An Agile-based methodology is employed in Reference [ 78 ] to leverage soft-skills required in the international labor market. The experiment involves the implementation of Scrum in four research departments at the University of Manaus, Brazil and 23 projects involving 34 students. Results revealed that competencies such as communication and story telling, responsibility and commitment, leadership, transparency and honesty and time management were successfully improved based on the perceptions of the participants and the completion of the syllabus’ goals. Sustainability 2019,11, 2915 18 of 29 Another analysis of the competencies that are developed through Agile Education can be found in Reference [ 79 ]. In this work, an experience of the application of the “Learning Methodology + Service (L+S)” by means of Agile is presented. It proposes the combination of Agile practices with the framework proposed by the authors (L+S), which is based on carrying out practical projects to solve a real problem or case of the community. This way, the learning process also serves a public service to the community. In this case, Agile methodologies are applied to create a web portal to promote the local bookstores association. Additionally, an analysis of the competencies obtained both by means of applying Agile and L+S are derived. Examples of competencies observed by the instructor during the project include communication skills, complex problem solving skills, empathy with the community, teamwork, collaborative work, working under pressure, self-management skills, and self-organization. Analogously, students: (i) experimented the concept of social responsibility by providing the local community with a valuable service; (ii) understood the importance of listening and talking to their peers; (iii) assumed the responsibility of working in areal challenge; (iv) valued differences and tolerance; and (v) learned in a collaborative way. The combination of Agile Learning with a community service served as a powerful combination to raise awareness about the importance to sustain local communities and developed key ESD competencies. Agile Education experiences can also be developed in virtual environments. In Reference [ 80 ] a framework for designing virtual learning environments based on Agile Learner-centered approach is presented. The proposed Agile Learning Design is an iterative model that focuses on collaboration and rapid prototyping. The learning environment is based on: active users participation, collaborative development, architecture/design envisioning, iterative modeling/design, model/design storming and early and continuous evaluation. The learner-centered approach develops competencies and benefits such as personalized learning and advanced participation, increases retention of knowledge, improves problem-solving skills and encourages collaborative learning. Scrum is applied to structure a full Computer Engineering Degree program in the work by Soto et al. [ 38 ]. An adaptation of the Scrum framework to the processes, resources and results of teaching-learning process is described. The goals of the Agile Education approach are to: (i) apply the Scrum framework to academic activities such as planning, development and follow-up; (ii) obtain self-managed student teams with high level of interaction; (iii) actively involve students and teachers in the different stages of the teaching-learning process following the practices of the Scrum framework; (iv) use Agile practices as mechanisms to develop competencies such as: organizational capacity, teamwork, communication and leadership; and (v) improve the efficiency and satisfaction of the work team. The usual rules, roles and artifacts of Scrum are followed. An experiment, based on student surveys, to analyze the application of the framework by 6 teachers and 250 students during 3 semesters is conducted. Results show a high satisfaction with the model among students and high rates of completion of course objectives and tasks to be implemented. Moreover, other qualitative objectives such as optimal organization of students and teacher work, acquisition of students competencies and learning, motivation and increased interest in the participation of academic activities were achieved. Regarding the competencies that were initially outlined, students developed the ability to work collaboratively, discuss different points of view, develop critical thinking and reach consensus, communicate effectively and lead projects. In Reference [ 36 ], Krehbiel et al. propose an alternative Agile Manifesto for Teaching and Learning based on 6 principles materialized in the form of competencies (see Table 6) which are part of the backbone of ESD. An experiment is presented to validate their approach, in which 109 students participating in courses structured using Agile Education from different subject areas, such as computer science and programming, technical writing, supply chain management, early childhood education and civic studies, are surveyed in relation to their satisfaction with the use of Agile methodologies and its ceremonies and artifacts. Students acknowledge that the inclusion of Agile methodologies leads to a more effective learning experience and a more efficient use of their time while enhancing Sustainability 2019,11, 2915 19 of 29 teamwork and communication. Also they appreciated the fact that it simulates real-world conditions of team-based work. Faculty noticed that the use of Agile led to increased quality in the work delivered by students and they expressed their willingness to continue using Agile in their future courses. However, they highlighted the fact of needing to carry out some adaptation of the lexicon and terminology of Scrum in non-technical courses to avoid confusion and rejection of students. As a conclusion, the authors state that the application of Agile methods in education leads to better learning outcomes for students, greater student buy-in for group-based projects, more authentic forms of group collaboration and greater opportunities for creativity and leadership by members of student groups. Table 6. Agile Education principles and competencies proposed in [36]. Principle Competencies Adaptability over prescriptive teaching methods. ⇔ Ability of students to operate in an environment of uncertainty. Generate abilities to navigate in the midst of ambiguity and thrive in a dynamic world. Collaboration over individual accomplishment ⇔ Transparent communication, ability to listen effectively and to provide positive feedback, engagement, cooperation, collaborative work. Work effectively in teams. Achievement of learning outcomes over student testing and assessment. ⇔ Encourage students to be learning-driven rather than test-driven, create self-motivated, lifelong learners. Pitfall of learning for the test: the retention of the knowledge is very low and therefore, it does not promote lifelong learning. Student-driven inquiry over classroom lecturing. ⇔Student empowerment, deep learning, develop applicable skills. Demonstration and application over accumulation of information. ⇔ Self-confidence by means of demonstrating knowledge and skills in a tangible way. Knowledge retention. Improvement over the maintenance of current practices. ⇔Risk-taking, creativity, innovation. In Reference [ 33 ], Onieva discuses in a thorough and explicit way the competencies that a professor must possess and that can be obtained by means of Scrum and which, consequently, can also be transferred to the students by means of Agile Education in general. Among these competencies, the author considers: (i) competency to plan, develop and evaluate education for the reinforcement of human values; (ii) competency to create and maintain open, flexible, democratic and culturally rich environments where a positive learning climate is stimulated; (iii) competency to promote professional development and training of learning communities with education stakeholders; (iv) competency to develop critical thinking; (v) competency to learning to learn, (vi) competency to develop communication skills; (vii) competency to develop autonomy and self-organization; (viii) competency to adapt to changes; (ix) competency to present ideas in an argued way; (x) competency to reach consensus; (xi) competency to foster and accept diversity; (xii) competency to optimize time effectively; and (xiii) competency to develop creativity. As an example, the author considers some core competencies of the degrees imparted in the Education College, such as the elaboration and defense or arguments and problem resolution, issuance of judgments including reflection on relevant social, scientific and ethics topics, transmission of information, ideas, problems and solutions to both specialized and non-specialized audiences, development of learning skills to become autonomous and last, but not least, group working, collaboration and respect of diversity and discrepancy. These competencies are all related to communication, social relationships, creativity and personal, emotional and academic development and are all, again, key competencies of ESD. Moreover, they are hard to learn for students using a learning strategy purely based on lectures. As a result, the author defines these competencies as part of the learning objectives of an experiment in which Scrum is applied to manage a class project in the Sustainability 2019,11, 2915 20 of 29 context of a course in a Primary Education Teaching degree. The 85 enrolled students, divided into 11 groups, showed high motivation and produced quality works. Additionally, the number of conflicts between them was considerably reduced when compared to other course editions and the desired outcome in terms of competencies was achieved by means of creating a work environment in which students respected and trusted their peers. To finalize the presentation of the works considered in this review, a summary of the key aspects of each work has been included in Table A1 in Appendix A. The table reflects the education level in which the experience is carried out, the employed Agile methodology, objectives and results, ESD competencies that are transmitted by means of the experience and the employed methodology. 6. Discussion 6.1. RQ1: Evidences of Application of Agile Methodologies in Education After having gone through hundreds of search results, we can conclude that there is, indeed, empirical evidence in the literature of the application of Agile Methodologies in Education (RQ1). Multiple studies ([ 4 , 81 – 103 ]) were left out of the systematic review since they did not explicitly find a direct link between key ESD competencies in the context of Agile Education, however they reflect how agile Methodologies are a topic of growing interest in many fields including education, and how the number of experiments and experiences is exponentially growing within the last years. Most importantly, its application is starting to flourish in non-engineering fields where the methodology was conceived, being a pedagogical framework with great potential to be used in any educational context and subject area. 6.2. RQ2: Application of Agile Methodologies to Improve ESD Competencies Regarding the application of Agile Education to foster and improve the transmission of key ESD competencies, it has been shown that many competencies stated by the authors as either the initial objectives of their Agile Education experiments, or collateral observed outcomes, are indeed competencies that have been listed by multiple authors as key competences for the successful development of Education for Sustainable Development. Therefore, we have observed how the application of the artifacts defined in the methodology implies putting into practice key ESD competencies such as critical thinking, uncertainty management, communication and respect for others’ opinions, collaborative work, dialog, responsibility, systemic thinking and so on. The acquisition of all these competencies has been evidenced by the authors as the main positive aspects of the application of Agile in the classroom environment. 6.3. RQ3: Deliberate Transmission of Competencies It has been shown that in some cases the transmission of these competencies is deliberate, as they are part of the outlined objectives of the educational program to be imparted by means of Agile methodologies. In other cases, these competencies are a positive outcome observed by both students and faculty. In all cases, authors did not design specific programs for the development of competencies in the context of ESD but, interestingly enough, they ended up working these competencies in a transversal and multidisciplinary way, which is one of the factors resulting in a more relevant and durable learning [104]. 6.4. Other Observed Results Agile methodologies are employed for different purposes such as designing courses, controlling class projects and work, tracking the progress of the students, adjusting the course pace, manage heterogeneous and globalized classes and improving the employability of the students by developing their soft skills. Sustainability 2019,11, 2915 21 of 29 The experiences are mostly carried out in Higher Education environments and only two works are deployed in other education levels such as Vocational Training and Secondary Education. As we have seen Agile methodologies were developed in work environments so their application is easier and straight forward in higher education levels. However, with the adaptation of some of their processes and concepts, it can also be employed at lower education levels. An initial increase in the workload of professors has been identified when designing and implementing Agile Education experiences, however it seems to derive a more efficient use of their time when consolidated. All studied experiences have shown a positive perception and acceptance from both students and instructors. Students have appreciated the strong bonds developed between their peers and the availability and down-to-earth culture of the faculty. By showing that the students’ feedback is considered and cared for, a greater degree of engagement is achieved. Moreover, it has been observed that there is a clear link between key ESD competencies and key Agile Education Competencies, as summarized in Figure 6, and that Agile Methodologies can be customized to build powerful pedagogies based in collaboration, participation and practice to build competencies which scaffold pro-environmental attitudes in students, as future citizens. KEY ESD COMPETENCIES KEY AGILE EDUCATION COMPETENCIES Coping with Uncertainty Working creatively and Innovation Dialog Critical thinking Self-motivation and motivating others Manage emotions and concerns Interdisciplinary work Planning and implementation Responsibility Systemic thinking Agile provides tools to allow adaptation to change processes. Agile favors innovation by fostering creative solutions based on collaborative work. Combines efficiently with other innovation methodologies e.g. design thinking. Agile interaction processes’ are based on dialog to create knowledge and increase cohesion of members. Agile promotes critical thinking from a continuous reflection process. Agile empowers individuals to contribute to find solutions and feel valuable within the team. Agile provides long-life and multipurpose project management skills. Agile teams are typically composed of multidisciplinary members. Agile favors the pursuit of consensus to reach efficient solutions from the opinions of all stakeholders. Agile fosters both individual and group responsibility. Agile faces issues and tasks as part of a complex and interconnected system, not as isolated individual elements. Figure 6. Link between key ESD competencies and key Agile Education competencies. 6.5. Limitations of the Systematic Review Despite the growing popularity of Agile methodologies within recent years, its application in the field of education is still a novelty in an early phase, and existing published experiences are mainly motivated by educators interested in the topic without the formal backup of school management and institutions. Although the number of articles is considerable, a large majority of them have been conceived to be presented at conferences (see Figure 5). Consequently, many studies do not present a thorough and detailed experimental design, creating then a possible bias in the experiences and results. Our screening process has tried to eliminate those studies the conclusions of which were not supported by enough evidence and a statistically significant sample. On the other hand, the development and fostering of key ESD competencies has been manifested in most works in an unintended or collateral way. In spite of the evidenced link between competencies empowered by Agile Education and ESD competencies, authors do not explicitly mention improving sustainability as their main objective (although creating responsible and life-long learners is clearly stated as an objective). Moreover, a reduced number of articles (N = 5) having gone through the title and abstract screening, could not be retrieved due to restricted access from our institution to the publisher database and were, consequently, left out of the review. It is expected that, in the following years, exhaustive Sustainability 2019,11, 2915 22 of 29 works and projects using Agile as the core to create education experiences will be published, allowing an expansion of the current study by means of a meta-analysis. 7. Conclusions By using Agile methodologies to design, structure and steer courses as a whole, or punctual activities and projects, instructors are offering a valuable framework and environment for students to develop valuable competencies that can serve to increase their performance in their work life and their development as responsible citizens living in a sustainable way. The study has revealed how the core competencies, in which Agile Education is deeply rooted, are shared with key competencies for ESD identified by researchers over the last decades. The change in the education paradigm to evolve from “traditional education” to “Agile education” implies a large, although easy to adopt, revolution in the design, planning, teaching and evaluation processes of educational programs. This revolution entails the fostering of a more participative and collaborative education that empowers students in rights but also in responsibilities as the tasks and learning objectives are clearly stated by means of publicly specifying their ownership. Students become active learners and cannot remain passive in courses structured in this way. In addition to the transmission of ESD competencies, students learn a work methodology that is largely applied in the labor market, preparing them, then, in a better way to address challenges presented in modern work environments. The present research sheds light, as well, on the opportunity and the current challenge of Agile methodologies as a strategy to favor models of economic sustainable development from the context of education. It is important to be aware of the impact and controversy that the implementation of agile methodologies in the work environment can generate. A misuse of these Agile methodologies oriented to the sheer obtaining of results and short term benefits, without considering the socio-environmental impact, can cause negative effects in the environment that comes from unsustainable actions (overproduction, resource wasting, disproportionate generation of waste, etc.). The mere application of agile methodologies in the context of education does not guarantee the promotion of pro-environmental behaviors. Special emphasis must be done during the process so that the underlaying ESD competencies enumerated along this work, and which are put in practice by means of Agile, are revealed and known by the students. When the synergies generated between ESD and Agile methodologies are known and explained, key competencies to teach responsible and sustainable citizens and future employees, as well as businessmen, are consolidated. The studies analyzed in this review have shown how the application of a series of basic actions such as forcing periodic group meetings, gathering feedback, working in cycles, equitably distributing tasks and developing a closer relationship between faculty and students, allow the development of important competencies such as critical thinking, coping with uncertainty, adaptability, creativity, dialog, respect, self-confidence, emotional intelligence, responsibility and systemic thinking which conform the pillars of sustainability-oriented citizens. The applications of Agile Education are multiple and varied. Different methods like Scrum, Kanban or XP can be curated to fit almost any course or learning experience and show great potential to adapt to the life-long learning required by our current fast-evolving society. Author Contributions: Conceptualization, A.L.-A., A.O.-V. and F.P.-V.; methodology, A.O.-V. and A.L.-A.; validation, A.L.-A. and F.P.-V.; formal analysis, A.O.-V. and A.L.-A.; investigation, A.L.-A., A.O.-V. and F.P.-V.; data curation, A.O.-V. and A.L.-A.; writing—original draft preparation, A.O.-V. and A.L.-A.; writing—review and editing, A.O.-V.; supervision, F.P.-V. Funding: This research received no external funding. Conflicts of Interest: The authors declare no conflict of interest. Sustainability 2019,11, 2915 23 of 29 Appendix A Table A1. Summary of key aspects of the works included in the study. Author & Reference Edu. level Agile Method Objectives Results ESD Competencies Fernández, I. [70] Vocational Education. Agile PDCA. Improve employability of students. Superiority of Agile Program to transmit initiative, self-confidence and communication competencies. Motivation, enthusiasm, initiative, team work, empathy, conflict resolution, adaptability and change management, self-confidence and communication. Cubric, M. [39] Higher Education. Agile L&T. (Adaptation of Scrum). Organize teaching of the course and learning Agile Project Management by doing. Measure initial uncertainty, impact on learning, engagement, performance, type of learning satisfaction, teamwork and role of the teacher. Students value prompt feedback, engagement of professor, practical applications of methodology. Learning was enhanced. Good perception on transmitted competencies. Team work, time-management, negotiation, respecting classmates and growing self-confidence in face-to-face communication. Razmov, V. & Anderson, R. [75] Higher Education. Adaptation of Scrum. Developing a personalized approach to teaching. Implement short feedback cycles. Allow demand-based personalization of content. Measuring perceptions on students and instructors. Instructors feel that Agile allows focusing attention on important topics, and there is less guesswork to do. Students value incremental delivery approach and learning experience. Dealing with uncertainty. Kastl, O. & Romeike, R. [76] Secondary Education AMoPCE: Agile Model for Projects in Computer Education Gain insight into how Agile practices assist individual learning processes in heterogeneous courses, and how it helps teachers to design and organize projects to support students individually. Frequent meetings reduces dominant-student attitudes. Better picture of strengths and weaknesses of students for teachers. Easier to provide individual guidance to students. Students look after each other. Quantity and quality of interactions increases. Efficient method to foster self-cooperative learning in heterogeneous classes. Communication, self-organization, reflection, ability to work in teams, collaboration. Damian, D. et al. [46] Higher Education. Scrum Manage distributed software project course between a Canadian and a Finnish university. Expose students to cultural differences in a work environment. Develop competencies to work in globalized contexts. Challenges due to cultural differences (in how ideas are conveyed) and differences of seniority in the topics treated. Students rate positively the experience of developing a real product using a methodology employed in real work environments. Communication skills are improved. Teamwork, planning, effective communication in a globalized team. Valentin, E. et al. [78] Higher Education. Scrum Develop soft-skills required in international labor market. Competencies were improved after finalization of the program. Students valued positively both outcome and Agile methodology employed. Modifications of Scrum to fit educational environments proposed. Communication, story telling, responsibility and commitment, leadership, transparency, honesty, time management. Sustainability 2019,11, 2915 24 of 29 Table A1. Cont. Author & Reference Edu. level Agile Method Objectives Results ESD Competencies Elgueta J.C. [79] Higher Education. Kanban Carrying out practical learning projects to solve real problems for the community and develop skills and competencies to serve the local environment. Remarkable improvement of key ESD competencies in the context of community work. Communication, complex problem solving, empathy towards the community, teamwork, collaborative work, working under pressure, self-management, self-organization, listening to peers, responsibility, value differences, tolerance. Battou, A. et al. [80] Higher Education. Agile Learning Design (custom design). Designing a Virtual Learning Environment for a Project Management course using an Agile learner-centered approach based on three packages: learner, domain and adaptation, which are articulated using a design-and-prototype iterative loop. The deployed method allows course designs to be modified according to the needs of learners emerging during development. Human contact with students is improved leading to higher motivation in the students. Collaborative learning, participation, problem-solving. Fernanda, S. et al. [38] Higher Education. Adaptation of Scrum. Five objectives: (i) plan, develop and follow up academic activities in an agile way, (ii) creating self-managed students, (iii) active involvement of teachers and students, (iv) improve key competencies and (v) improve satisfaction and efficiency of team. High satisfaction among students and high rates of completion of course objectives. Optimal organization of course, acquisition of competencies. Increase of motivation and interest. Organizational capacity, teamwork, communication, leadership. Krehbiel, T.C. [36] Higher Education. Adaptation of Scrum. Analyzing how Agile can be used to articulate courses in different disciplines. Students acknowledge Agile leads to a more effective learning experience and efficient use of time with better communication and teamwork while simulating real world conditions. Faculty noticed increased quality in work delivered by students. Communication, team-based work, creativity, leadership. Onieva, J.L. [33] Higher Education. Scrum Managing a class project in the context of a course in the Primary Education Teaching degree. Improve competencies included in the curriculum of different degrees in the Education College. Identify key competencies both professors and students must possess. High motivation of students. Increased quality of delivered works. Reduction of conflicts in work teams. Acquisition of competencies. Professors: planning, developing critical thinking and communication skills, adapting to changes. Students: Problem resolution, reflection, autonomy, collaboration, respecting diversity and discrepancy. Sustainability 2019,11, 2915 25 of 29 References 1. Royle, K.; Nikolic, J. A modern mixture, Agency, Capability, Technology and ‘Scrum’: Agile Work. J. Educ. Soc. Policy 2016,3, 37–47. 2. Gannod, G.C.; Troy, D.A.; Luczaj, J.E.; Rover, D.T. Agile way of educating. In Proceedings of the 2015 IEEE Frontiers in Education Conference (FIE), Washington, DC, USA, 21–24 October 2015; pp. 1–3. [CrossRef] 3. Branson, R.K.; Rayner, G.T.; Cox, J.L.; Furman, J.P.; King, F.J. Interservice Procedures for Instructional Systems Development. Phase 3. Develop 1975,5, 396. 4. Glassey, R.; Wiggberg, M.; Haller, P. Agile and Adaptive Learning via the ECK-model in the Software Development Academy. In Proceedings of the EC-TEL 2018: 13th European Conference for Technology-Enhanced Learning, Leeds, UK, 3–6 September 2018. 5. Ryan, A. Education for Sustainable Development and Holistic Curriculum Change: A Review and Guide; The Higher Education Academy: York, UK, 2011. 6. Heidi Musser—Embracing the Agile Mindset & Agile’s Core Principles—The Agile Alliance. Available online: https://www.agilealliance.org/embracing-the-agile-mindset-agiles-core-principles/ (accessed on 22 February 2019). 7. Agile 101, The Agile Alliance. Available online: https://www.agilealliance.org/agile101/ (accessed on 22 February 2019). 8. Larman, C.; Basili, V.R. Iterative and incremental developments. a brief history. Computer 2003 ,36, 47–56. [CrossRef] 9. Jeff Sutherland, Real Time Process Improvement with SCRUM. Available online: http://jeffsutherland.org/ 2004_09_01_oldstuff.html (accessed on 22 February 2019). 10. The Standish Group—CHAOS Report. Available online: https://www.standishgroup.com/outline (accessed on 22 February 2019). 11. Owen, R.; Koskela, L.; Henrich, G.; Codinhoto, R. Is agile project management applicable to construction? In Proceedings of the 14th Annual Conference of the International Group for Lean Construction, Santiago, Chile, 25–27 July 2006; pp. 51–66. 12. Vázquez-Bustelo, D.; Avella, L. Agile manufacturing: Industrial case studies in Spain. Technovation 2006 , 26, 1147–1161. [CrossRef] 13. Kitzmiller, R.; Hunt, E.; Sproat, S.B. Adopting best practices: “Agility” moves from software development to healthcare project management. CIN Comput. Inform. Nurs. 2006,24, 75–82. 14. Room, G. Complexity, Institutions and Public Policy: Agile dEcision-Making in a Turbulent World; Edward Elgar Publishing: Cheltenham, UK, 2011. 15. Schwaber, K.; Sutherland, J. The Scrum Guide 2017. Available online: https://www.scrumguides.org/docs/ scrumguide/v2017/2017-Scrum-Guide-US.pdf#zoom=100 (accessed on 21 May 2019). 16. Sutherland, J. Business Object Design and Implementation Workshop. SIGPLAN OOPS Mess. 1995 , 6, 170–175. [CrossRef] 17. Van Ruler, B. Agile public relations planning: The reflective communication scrum. Public Relat. Rev. 2015 , 41, 187–194. [CrossRef] 18. Streule, T.; Miserini, N.; Bartlomé, O.; Klippel, M.; De Soto, B.G. Implementation of scrum in the construction industry. Procedia Eng. 2016,164, 269–276. [CrossRef] 19. Sutherland, J. Inventing and Reinventing SCRUM in five Companies. Cutter IT Journal 2001,14, 5–11. 20. Greening, D.R. Enterprise scrum: Scaling scrum to the executive level. In Proceedings of the 2010 43rd Hawaii International Conference on System Sciences, Honolulu, HI, USA, 5–8 January 2010; pp. 1–10. 21. Jira—Agile Project Management Tool. Available online: https://www.atlassian.com/software/jira (accessed on 22 February 2019). 22. Version One—Agile Project Management Tool. Available online: https://www.collab.net/ (accessed on 22 February 2019). 23. Pivotal Tracker—Agile Project Management Tool. Available online: https://www.pivotaltracker.com/ (accessed on 22 February 2019). 24. Ismail Kaya—Differences between Kanban and Scrum. Available online: https://www.cmswire.com/ information-management/agile-vs-scrum-vs-kanban-weighing-the-differences/ (accessed on 22 February 2019). 25. Trello—Virtual Kanban Board. Available online: https://www.trello.com (accessed on 22 February 2019).